This presentation are taking about the major points for the main keys of quality to control the MEP Activities, which is so important to any starting of any project.

1. KEYS OF QUALITY
IN
MEP ACTIVITIES
MY NAME IS: WALID ALSARADY,
WORKING AS PROJECT QA/QC MANAGER

2. Where to go?
Who to Ask?
How To do?

3. MANY QUESTIONS NEED TO HAVE A
SOLUTIONS

4. BEFORE START ANY WORK. WHAT SHOULD WE GET?
WE SHOULD HAVE APPROVED SHOP DRAWINGS

5. INSTALLATION AND TESTING PROCEDURES
Approved MS Safety
Instructions
Steps of work
in Checklist

6. Practical Examples Showing correct procedures
for main MEP activities

7. USING REJECTED DRAWINGS
What will
cause?
No control from QA/QC
Department or C.M.
No Stamps

8. LIKE THIS
WHICH CAME FIRST? THE COLUMN OR THE
WINDOW?

9. OR CAN BE LIKE THIS
THAT IS ACTUALLY AN AWESOME IDEA !

10. • To use approved stamped shop drawings only, controlled copy
or Uncontrolled copy signed from the QA/QC Department
SO, WHAT'S CORRECT?
STAMPED
Approved QA/QC Signature in
AutoCAD copy

11. DELIVERY OF MATERIAL
Once material delivered to the site. What steps must be taken?
1. How to receive it and handle it? 2. To be checked
3. Storage?
4. Shift the
material to the
Site

12. INSTALLATION OF WIRES AND CABLES

13. What is correct?

14. Duct Work STORAGE

15. WHAT IS CORRECT?

16. WELDING FOR PIPES
Damage of Cable
Why it
happen?
??

17. WHAT IS THE CORRECT ?
To provide a blanket above the welding joints

18. INSTALLATION OF EMBEDDED SERVICES

19. WHAT IS CORRECT ?
Install the
Conduits &
boxes
Final PlasterApply concrete shots

20. INSTALLATION OF PLUMBING PIPES
LEAKAGE LEAKAGE LEAKAGE
WHAT IS THE MAIN PROBLEM?

21. DO IT FIRST CORRECT…… HOW?
SAND OFF THE SAW
BURRS FOR A BETTER
FIT
MARK THE PIPE AND
FITTING FOR PRECISE
ORIENTATION
MARK THE CUTTING
AREA
SEAT THE TEETH INTO
THE PIPE
SAW THROUGH THE
PIPE FIRMLY
CLAMP THE PIPE INTO
PLACE WITH A VISE

22. FIX MISTAKES WITH A
COUPLING
PUSH AND TWIST FOR
LEAK-PROOF JOINTS
PUSH THE PIPES AND
KEEP 20 SEC.
WHAT NEXT?
TESTING OF THE PIPES

23. TYPES OF TEST
1- PRESSURE TEST
CHW PIPES WATER SUPPLY
PIPES

24. TYPES OF TEST
2- GRAVITY TEST
DRAINAGE AND
PLUMBING
PIPES

25. HOW TO DO GRAVITY TEST
After 4 hours
TO CHECK THE WATER LEVEL

26. MAIN PROBLEM IN ALL PROJECTS
SITE COORDINATION AND STAFF COORDINATION

27. HOW TO COORDINATE ON SITE ?
pre-start activity
meeting on site
Training for the Plan of
work
Help each other
Coordinate with other
services
Monitor the status of
the work together
Put the final touches
together

28. IN CONCLUSION