1. Vishwas Bhajandas Shende, 305, GH-11, Indianoil Apt, Faridabad – 121001 Haryana India
Phone: 0091-8527112099, 8800830448, vbs305@yahoo.com
Page 1 of 10
Proficient Engineering and Design experts and leader with over 29 years experience in - innovation, fundamental research,
product design, formulation, engineering management, leadership, new business development, and strategic planning
Creative problem solver with high level of initiative looking for innovation and business potential in everything. Thrives in a
fast-paced environment with abilities to lead, drive and succeed in almost any part of business. Enjoys mentoring and
guiding others in unraveling their own capabilities.
SUMMARY
Nationality: Indian
Qualification: M Tech (Chemical Engineering, IIT Kanpur)
Current Location: Noida, UP India
Current Position: Sr Principal Engineer – Process Engineering
Current Employer: Samsung Engineering
Clients worked with: IOCL, BPCL, Gulf Farabi (SA), DCW (Dhrangadhra Chemical Works, India), AkzoNobel
(Global), StateOilHydro (Norway), ADCO & GASCO (Abu-Dhabi), PDO (Oman), GSPC
(India), SABIC (SA), , KNPC (Kuwait), Saudi Aramco (SA), HMEL (Bhatinda – India)
Previous Employers: M/s Uhde India (Thyssenkrupp) Pvt Limited, Pune India
M/s Cairn Energy, Gurgaon, India
M/s Dodsal Engg & Construction Pte Ltd, Dubai UAE
M/s Aker Kvaerner Offshore Partner, Norway
M/s Kuwait National Petroleum Company, Kuwait
M/s IndianOil Corporation Limited (IOCL), India
Area of work: Process Design, Conceptual, FEED, Detailed, Pre-Bid Engg, PMC, Oil & Gas Technical
Supports & Services, Simulation, Catalysis, Studies, Troubleshooting, Operations,
Commissioning, Plant Turnaround, Training etc.
Engineering Expertise: Detailed Engineering, Proposal Engineering, Basic Engineering, Conceptual Engineering,
PMC, EPCM, EPC, LSTK, FEED
Oil Refining Expertise: FCCU, Visbreaker, PRU, DHDS, CRU, Flare, Merox, Hydro-treating and other Refining
Processes
Oil Refining Catalysis FCC Catalyst, Additive Developed & Commercialized, Catalyst Evaluation, Selection &
Recommedndation, Plant Trial, Catalyst Change Over, Catalyst Troubleshooting
Oil & Gas CDS, RDS, Gas Processing (LPG, LNG, Off Gas, Flare Gas Recovery), Wellhead,
Wellhead Piping, Crosscountry Pipelines, Drilling Module, Chemical / Steam Injection for
inhancement in Oil Recovery
PetroChemical Processes PP, HDPE, PBT, LAB, ACN & NaCN, Decorative Water Based Paint
Analytical Ability: Hydraulic, Transient/Surge, Temperature Survivability, Gas Depressurization / Dispersion /
Radiation Analysis etc.
HSE Skill: Hazop, PHSER, SIL, Bow-Tie Analysis, SHEMS, SHE, OHSMS, QMS, EMS.
Simulation Skill: Aspen Plus, Honeywell UniSim, HTRI, Korf Hydraulics, Schlumberger PipeSim
Simulator, Predict 5.0 from Honeywell (Corrosion Software), AspenTech & SETCON
Process Controller, Pipe Flow, FCC Offline Simulator & Training Simulator etc
Engineering
Management:
Leading a Process Department Team of the company with 45 Process & Rotary Engineers.
Executed Proposal with a role of Proposal Manager for 7 Billion US$ Oil & Gas Project
leading a multi-disciplinary team of 25 engineers.
2. Vishwas Bhajandas Shende, 305, GH-11, Indianoil Apt, Faridabad – 121001 Haryana India
Phone: 0091-8527112099, 8800830448, vbs305@yahoo.com
Page 2 of 10
WORK EXPERIENCE
December 2012 – Continue: Samsung Engineering, Noida
Main Role: Sr Principal Engineer (General Manager) - Process As a Part Leader, Lead Engineer, QCC
(Quality Consultant)
Main Achievements:
1. Proposal, Basic Process Design and Detailed Engineering for Refinery Fuel Gas Feed to HGU Project at
HMEL, Bhatinda Refinery. Project Challenge: Process Design to Prepare Ultra low sulfur Feed Gas to
HGU
a. Complete Simulation and design of Acid Gas Treatment Unit along with DCU and PSA Off Gas
Compressors and HP Surge Vessel to prepare feed for HGU – Design Completed.
b. Detailed Engineering of Feed Stock Conversion from Naphtha based to Gas / Mixed Composition
based for HGU Project (Basic Engineering by Haldor Topsoe)– Construction Underway.
Estimated Project Cost: 50 Million US$
2. Spec Analysis & Risk Identification: Identified several key aspects which has impact on estimated project
cost for bid submission and recommended several Value Engineering design changes.
− Saudi Aramco for Fadhili Gas Plant Project Proposal
− Takareer Ruwais Refinery POC (Processing Offshore Crude Project)
3. Poly Propylene IOCL Paradeep, Odisha Proposal: Poly-Propylene Plant of 680 TMTPA (2 Trains) and
Common facilities for both the trains on LSTK basis – Bid Submitted.
Estimated Project Cost: 500 Million US$
4. ACN, NaCN & U&O SABIC Proposal: EPC of Chemical Plant, Acylonitrile (ACN) 200 TMTPA, and
Sodium Cyanide (NaCN) 40 TMTPA and Expansion of Existing Utilities and Offiste Area and
Interconnecting Piping within Royal Commission’s Pipe Cooridoor. – Bid Submitted.
Estimated Project Cost: 500 Million US$
5. LNG Mundra Re-gasification Proposal: Receipt of LNG in cryogenic condition, Storage and re-gasification
to supply to consumers. – Bid Submitted
Estimated Project Cost: 200 Million US$
6. Rapid Refinery Proposal for Petronas for RFCC, Crude Unit, LPG, PRU. Scope involved PSV sizing,
Hydraulics, ITB Summary.
7. Established Quality Procedures which involve Value Engineering, Design Review, Design Audit, Technical
Audit, Model Review, Training Level Up, Skill upgradation etc.
8. Design Verification, Model Review, Pre-Review, Result Review, Value Engineering:
Design Review:
KNPC Clean Fuel Project (Kero Hydrotreater, Flare & HCO Cooling)
HDPE Uz-Kor Gas Chemical Company (UGCC)
3. Vishwas Bhajandas Shende, 305, GH-11, Indianoil Apt, Faridabad – 121001 Haryana India
Phone: 0091-8527112099, 8800830448, vbs305@yahoo.com
Page 3 of 10
3D Model Review for
60% LubRef Yanbu Refinery Expansion (OffSite)
90% HDPE Uz-Kor Gas Chemical Company (UGCC)
90% Model Review for Slurry and Diesel HydroTreater
60% Model Review Ammonia Plant of SOCAR (State Oil Company of Azerbaijan Republic
Pre-Review for
SOCAR Ammonia Project
KNPC Clean Fuel Project (Kero Hydrotreater, Flare & HCO Cooling)
Result Review for
HDPE Uz-Kor Gas Chemical Company (UGCC)
January 2011 – December 2012: Uhde India Pvt Ltd (Thyssenkrupp Uhde)
Main Role: Dy General Manager – Process – Section Head
Heading the team of 45 Engineers, Managing & Executing Process Activities of the department includes
Conceptual / Feasibility Studies, Pre-Bid, Detailed, Pre-commissioning / Commissioning, Equipment / Plant
Design, Design Verification / Review, Design Consolidation Check, Technical Bid Analysis, Hazop, Hazid,
PHSER, SIL Studies etc
Main Achievements:
1. Hydrogen Recovery from Hydrogen Rich Refinery Off Gas Using PSA for Bongaingaon Refinery :
Refinery Off Gas Compression, removal of heavier component and further processing in PSA package unit.
– Conceptual Design and Proposal, Project Cost: 10 Million USD.
2. Hydraulic Power Recovery Turbines (HPRT) –Feasibility Report on “Plant Modification to install HPRT in
VGO HDT Charge Pump and Lean Amine Pump : Estimated Project Cost 0.5 Million USD
3. Proposal Engineering of “Conversion of HGU-1 to Process Natural Gas as Feed” at Gujarat Refinery” –
Commissioned.
4. AkzoNobel Paint Project Lego & Detailed Engineering: Conceptual Design, Basic Engineering & Detailed
Engineering of water borne Paints involved handling and mixing of Solid & Liquid Raw materials in Bulk
and Semi Bulk, mixing and packaging of finished products, effluent treatment and utilities etc. –
Commissioned, Project Cost: 20 Million USD
Challenge: Developed Project Lego based on plant operating experience.
5. Import of LPG / Propane / Butane at JNPT Jetty & Development of Refrigerated Storage Facility at Uran
LPG BPCL Plant (Cryogenic Storage). 1.5 MMTPA– EPCM include Unloading & Handling facilities at
JNPT jetty, 12 KM, 12” Pipeline transfer facilities, Receipt & Storage facility at Uran LPG plant in
Cryogenic State which covers Refrigeration System, LPG mounded bullet, Flaring System, Despatch
Facilities at Uran LPG plant LPG truck Loading, Carousal Filling, Utilities etc. – Plant Commissioned,
Project Cost: 60 Million USD.
4. Vishwas Bhajandas Shende, 305, GH-11, Indianoil Apt, Faridabad – 121001 Haryana India
Phone: 0091-8527112099, 8800830448, vbs305@yahoo.com
Page 4 of 10
6. BPCL Propane & Butane Blending in Cryogenic State – Detailed Feasibility Report: Feasibility Report to
convert existing LPG unloading, storage and transport in cryogenic condition to unloading, storage,
transportation and blending of Propane & Butane to LPG – Commissioned, Project Cost : 3 Million USD
7. Gulf Farabi Petrochemical, SA -: Capacity: 70,000 MTPA: EPCM of Process Plant to produce Linear
Alkyl Benzene (LAB) from n-paraffin and benzene from Basic Engineering Package of Process Licensor
UOP – Commissioned, 100 Million USD.
8. PBT (Poly-Butylene Terephthalate) Plant for SIPCHEM at Al Jubail Saudi Arabia 63,000 MTPA: Basic
Engineering followed by LSTK of Process Plant to produce Poly Butylene Terephthalate from Purified
Terephthalic Acid (PTA) and 1.4-butanediol (BDO) – Commissioned, 170 Million USD.
8, Design Review of Various Projects
BPCL Catalytic Reforming Unit (CCR)
Synthetic Iron oxide Plant of DCW
9, Hazop Completion of Various Projects
Chairman for DCW – C-PVC (Chlorinated Poly-Vinyl Chloride) Project
Internal Hazop Chairman for Gulf Farabi LAB (Linear Alkyl Benzene) Project
Chairman for DCW – SIOP (Synthetic Iron oxide Plant) Project
October 2009 – January 2011: Cairn Energy India Limited, Gurgaon
Main Roles: Process Consultant
Managing & Executing Projects / Proposals / Packages, Pre-Bid, Detailed, Field Engineering, Equipment / Plant
Design, Project Feasibility Studies, Design Verification / Review, Pipeline Hydraulic & Temperature Profile
Studies, Developing / Conducting Varies Philosophies / Studies, Process, Hydraulic Simulation / Calculation,
PFD, P&ID, Cause & Effect Diagram, Hazop, Hazid, PHSER, SIL Studies etc.
Main Achievements:
1. IOCL Radhanpur Spur Line 22 KM: Detailed Engineering of Crude Oil Spur line from tap off from Cairn
Cross county Pipeline to IOCL Terminal at Radhanpur. – Commissioned.
2. IOCL Viramgam Spur Line 2.5 KM: Basic & Detailed Engineering of Crude Oil Spur Line from Cairn to
IOCL Terminal at Viramgam.– Commissioned
3. Reliance Spur Line: Design and Engineering for the facility which involve pig launcher/receiver, closed
drain tanks/booster pumps, Custody Transfer Metering package, pressure reduction station and spur
pipeline – Commissioned.
4. Bhogat Terminal 700,000 BOPD Export: Design, engineering, construction & commissioning for the
facility covers crude oil storage tanks, export booster pumps, export pumps to pump the crude oil into
marine tankers through SPM – Commissioned.
5. Marine Facilities 700,000 BOPD Export: Pigging facilities, 24” twin loading buried pipelines onshore 5.8
km and offshore (6km), Pipeline End Manifold (PLEM), Single Point Mooring (SPM) System and other
associated components for crude oil loading from Bhogat Terminal to the export oil tankers,
5. Vishwas Bhajandas Shende, 305, GH-11, Indianoil Apt, Faridabad – 121001 Haryana India
Phone: 0091-8527112099, 8800830448, vbs305@yahoo.com
Page 5 of 10
recirculation/flushing system using Light Crude Oil (LCO); and LCO import through SPM system from
marine tankers to Bhogat Terminal – Commissioned.
6. Bhagyam Trunk Line 24” 25KM: Production Fluid, Injection water and Irrigation water 25 km Trunk Line,
Pig Launcher / Receivers. – FEED completed, under bidding stage – Now Commissioned.
Project Cost: 700 Million US$
7, Hazop, Hazid, PHSER and SIL Completion of Various Projects
Participated as a Lead in Gas Pipeline Project - Hazop
Participated in Mangala Crude Oil Pipeline Project – Hazop & SIL
Participated as a Lead in Reliance Spur Line Project – Hazop & PHSER
December 2007 – September 2009: Dodsal Engineering and Construction Pte Limited, Dubai UAE
Main Role: Principal Engineer – Process
Project Lead Engineer / Proposal Manager, Managing & Executing Projects / Proposals, Pre-Bid, Detailed
Engineering, Equipment / Plant Design, Design Verification / Review, Hydraulic Studies, Process, Hydraulic
Simulation / Calculation, PFD, P&ID, Hazop Study etc.
Main Achievements:
1. Proposal Manager and Lead Engineer during Pre-Bid Engineering for:
i) ADCO SAS Oil Full Field Development Project, Abu Dhabi: Engineering, procurement and
construction of wellheads piping, flowlines, transfer lines. Main oil lines, gas injection and lift lines
etc., Project Cost: 5 Billion US$
ii) Habshan GASCO Flare Gas Recovery Project: EPC of Flare header, seal Drum, gas recovery
compressor. KOD and associated pipings, Project Cost: 150 Million US$
Lead a Team of 25 Engineers from all disciplines.
2. Project Management Consultancy (PMC) for
i) PDO Qarn Alam Steam Injection Project, Oman – On Plot: Facility is for to increase the oil
production to 60,000 BPD by injecting steam into the reservoir at the rate of 18,000 TPD. Project
scope involve Oil & Gas Section, Steam Generation Section and Water Treatment Plant, Project
Cost: 700 Million US$
3. Design Engineering Procedures / System: Procedures, check list, formats, data sheets, standards.
4, Hazop Completion - Participated as a Lead for PDO Qarn Alam Steam Injection Project, Oman
6. Vishwas Bhajandas Shende, 305, GH-11, Indianoil Apt, Faridabad – 121001 Haryana India
Phone: 0091-8527112099, 8800830448, vbs305@yahoo.com
Page 6 of 10
May 2007 – December 2007: Aker Kvaerner Offshore Partner (AKOP), Bergen Norway
Main Role: Sr. Process Engineer
Conceptual, Basic, FEED, Detailed Engg, Equipment / Plant Design, Project Feasibility Studies, Design
Verification / Review, Hydraulic Studies, PFD & P&ID, Line Sizing, Equipment Datasheet, Flare Calculations,
PSV, RO, Control Valve Sizing, Hazop Study etc.
Main Achievements:
− FEED/conceptual studies, offshore projects for StateoilHydro Norways on
o Chemical Flooding at Brage Oil Well: Implementataion of Test Module which involve injection for
chemicals flooding the oil wells by different chemicals to enhance the oil production.
o Oseberg B Utility Study due to upgrades of the Drilling Module – FEED Study to estimate the new
requirements due to the changes in the Drilling Module on Osberg B Platform.
o Genset NOx Reduction – Conceptual Study Report Oseberg A: Modification/upgradation of existing
Gas Turbines using Rolls Royce DLE (Dry Low Emission) Technology to reduced the NOX emission.
o Troll C Effluent water Treatment (To reduce oil content from 400 ppm to less than 10 ppm): Project
scope involve modification of Floculation Tank, Installation of Reject Tank & Pumps, Piping,
Developing Control Strategy, Demolition & Dismantling equipment.
February 2002 – May 2007: Kuwait National Petroleum Company, Kuwait (KNPC)
Main Role: Section Head - Technical Support & Training
Establish Training Infrastructure, Design, develop and executive training programs, Control and manage training
data base, Technical papers & reports, Evaluate and analyze technical studies, Design, develop & publish
departmental E-News Letter, Review & prepare Operating Manuals, Sketches, Procedures, Handbooks, Handouts,
Implementation and monitoring of ISO9001, ISO14001, SHEMS, Balanced Score Card, Assisting Technically in
Refinery Operations as assigned, SOLOMON Study, Process re-engineering etc.
Main Achievements:
− Trained and certified more than 20 Engineers and 250 Operators
− Designed, developed and implemented different training programs.
− Published Refining Operations Handbook and handbooks on turbine, pumps, heaters
− Prepared 30 Operating Manuals
− Published 16 monthly departmental e-News letters
− Published different controlled procedures
− Implemented Balanced Score Card
− Heater & Boiler Performance Study
− Pressure Survey Study
− Various Hazop Studies
− Conducted many major incidents drills
7. Vishwas Bhajandas Shende, 305, GH-11, Indianoil Apt, Faridabad – 121001 Haryana India
Phone: 0091-8527112099, 8800830448, vbs305@yahoo.com
Page 7 of 10
October 1999 – February 2002: Indian Oil Corporation Limited (IOCL)
Main Role: Manager, Technical Services - Process Engineering
Conceptual Studies, Basic and FEED Engineering, Technical Assistance in Refinery Operations/Troubleshooting,
FCC plant optimization, Selection of Catalyst for FCC, their test trials & economics calculation, Liaison for all
FCC units of the company, Engineering, Procurement & Plant Commissioning, Selection of FCC
Process/Technology, Resid FCC Equilibrium catalyst disposal, Design, develop and execute Petroleum Refining
Technology Training & FCC workshop for Refinery Engineers, Cost Estimation & Proposal preparation for New
Plant, Prepare technical papers, patents, reports on test runs, troubleshooting, optimization, de-bottlenecking,
catalyst evaluation, catalyst tendering, feed & product analysis, yield pattern etc
Main Achievements:
− Replaced 10 FCC catalysts & additives in different units with better yield pattern. Each catalyst
replacement resulted in net saving of 1-2 MMUS$/annum.
− Study report for Resid FCC plant de-bottle-necking
− Optimized bitumen cutter stock – Process Technology
− Developed FCC test run (Material & Heat Balance) spread sheet
− FCC plant data base for all Indian Refineries
− Process Technology and conceptual design for Processing/conversion of undesirable naphtha to valuable
products in FCC unit
− Selection of new FCC process technology
− Assisted in developing a FCC Indmax Process (Technology) and its commercialization
− Prepared Multigrade bitumen plant conceptual process design package
− FCC catalyst loss troubleshooting
− FCC catalyst New plant (in-house Technology) conceptual design & proposal
− Lube additives – plant designed & commissioned (based on in-house Technology)
− Designed and developed Training programs for Refinery Engineers.
− Organized and completed 2 Training program and 2 FCC workshop for Refinery Engineers
August 1994 – October 1999: Indian Oil Corporation Limited (IOCL)
Main Role: Dy Manager - Production
Plant-in-charge for FCC, Visbreaker, Merox, PRU, Flare, Planning and coordination for day-to-day’s operation,
Setting operational guidance, Coordinate multidisciplinary team of engineers for day to days problem, Planning
and coordination of units overhaul and execution, Project Execution & commissioning of new units,
Plant/Equipment Performance Study & its optimization, Pressure Survey, Heat & Mass Balance, Hazop Study,
test runs, troubleshooting, optimization, de-bottlenecking, catalyst change over, catalyst tendering, feed & product
analysis, yield pattern, Review and prepare Operating Manuals, Implementation of ISO9001, ISO14001 &
OHSMS, Design, develop and execute training program for Refinery Engineers etc
Main Achievements:
− Achieved highest FCC (surpassing all records) plant throughput with best yield pattern
− Achieved best FCC plant operating conditions resulted in saving more than 1MMUS$/annum
− Achieved highest run length for FCC & Visbreaker plants
− Optimized FCC plant performance using SETCON APC technology.
− Troubleshooted difficult FCC problems such as water carry over with feed, bottom circuit choking etc
8. Vishwas Bhajandas Shende, 305, GH-11, Indianoil Apt, Faridabad – 121001 Haryana India
Phone: 0091-8527112099, 8800830448, vbs305@yahoo.com
Page 8 of 10
− Handled difficult emergencies e.g. failure of bottom pump, DCS, Cooling water etc
− Overhauled completely FCC, Visbreaker, Merox, Flare, PRU plant two times
− Optimized Visbreaker plant performance
− Upgraded Amine Column (tray to packing)
− Replaced FCC feed Nozzle, cyclones
− Improved FCC feed pumping rate (impeller trimming)
− Established the usage of additives such as BCA (Bottom Cracking Additive), SOX (Sulfur Oxides Emissions
additive), ZSM-5 (LPG maximizing additive).
− Benchmarked refinery heaters with heaters of other refineries
− New Diesel Hydrotreater Project executed and commissioned
− Produced 500 ppm diesel against design level of 2000 ppm by adjusting process parameters
During the above assignmnt, I was leading a team of 15 engineers and 60 operating personnel.
January 1987 – August 1994 Indian Oil Corporation Limited (IOCL)
Main Role: Engineer & Sr Engineer (Process Engineering)
Develop FCCU process technology which involves establish reaction kinetics, hydrodynamics, catalyst, material
balance, heat balance, Evaluation and Optimization FCC Plant/Equipment Performance, Carry out test runs, De-
bottlenecking of FCC units, Development of FCC offline Simulator, Pressure Survey, Heat & Mass Balance,
Evaluations of FCC feed, catalyst & products and suggest necessary changes in plant operating conditions,
Troubleshooting FCC plant, Conceptual Design for in-House Processes, Selection of Catalyst for FCC and their
test trials, Prepare technical papers, patent, reports such as test rum, troubleshooting, optimization, de-
bottlenecking, catalyst change over, catalyst tendering, feed & product analysis, yield pattern, Evaluate and
analyze technical study reports, Implementation of ISO9001 etc.
Main Achievements:
− Developed FCC offline simulator for diesel mode of operation
− Optimized FCC plant performance using in-house developed offline FCC simulator.
− Troubleshooted difficult FCC problems such as higher CRC, coking, high catalyst loss, high dry gas & coke
make etc
− Recommended and implemented use of different FCC additives such as BCA (Bottom Cracking Additive),
SOX (Sulfur Oxides Emissions additive), ZSM-5 (LPG maximizing additive)
− Large number of FCCU catalyst and additives from world known supplier M/s Akzo-chemie, M/s W.R.Grace,
M/s Crossfield switchover was successfully done. Each catalyst switch over achieved a net profit of more than
1 MMUS$ per annum.
− Benchmarked all Indian FCCUs
− De-bottlenecked FCC Unit with respect to riser, cyclone design, feed nozzle, stripper etc
9. Vishwas Bhajandas Shende, 305, GH-11, Indianoil Apt, Faridabad – 121001 Haryana India
Phone: 0091-8527112099, 8800830448, vbs305@yahoo.com
Page 9 of 10
EMPLOYEMENT HISTORY
Position Year Employer Duration, Years
Sr Principal Engineer / General Manager 2012-16 Samsung Engineering, Noida, India 3.7
Dy General Manager 2011-12 Thysenkrupp Uhde India, Pune India 2
Process Consultant 2009-11 Cairn Energy, Gurgaon, India 1
Principal Engineer (Process) 2007-09 Dodsal Engg, Dubai, UAE 2
Sr Engineer (Process) 2007-07 Aker Kvaerner, Bergen Norway 1
Section Head (Tech Support & Training) 2002-07 KNPC, Kuwait 5
Manager, Tech Services (Process Engg) 1999-02 IOCL, India 3
Dy Manager (Production) 1996-99 IOCL, India 4
Engineer & Sr. Engineer (Process Engg) 1987-96 IOCL, India 8
Total Experience = 29.7 years
EDUCATION
B. Tech, Chemical Engineering, Nagpur University (India), 76%, Year: 1985
Master in Chemical Engineering, Indian Institute of Technology Kanpur (India), CPI = 8, Year: 1987
OTHER EDUCATION & TRAINING
− Leadership Workshop, 3rd Mar 2016
− How to Lead an Effective Team, 3rd July 2014
− Leading by Enabling, 19th May 2014
− Principles of Corrosion and its Control, Workshop at New Delhi during 20-22nd June 2013
− Oil & Gas Exploration, Workshop at Gurgaon during 17-18th May 2010.
− Bow-Tie Workshop in 2009
− SOLOMON Workshop at Shuaiba Refinery in 2006.
− Train the Trainer in 2002
− Akzo-noble symposium on FCC Technology at Mumbai in 2000.
− IFP France Hydro-treating Technological Seminar at New Delhi in 1999.
− Commissioning training for Diesel Hydro-de-sulphurization in 1999 at IFP, Paris (France).
− UOP FCC Workshop, Mumbai (India) for four days in 1996.
− SETCON plant optimizer (APC) training for one week in 1995.
− One week Fluid bed Technology course organized by M/s Mobil Research and Development Corporation,
USA at New Delhi (India) in 1993.
− Different Managerial Courses
− Self Developmental Courses (e.g. Presentation Skill, Time Management etc)
− ISO14001 Auditor course
− On Job Training Workshop for Engineers
SIMULATION SKILL
Aspen Plus, HYSYS / Honeywell UniSim, HTRI, Korf Hydraulics, Schlumberger PipeSim, SETCON Advance
Process Control Optimizer, AspenTech & SETCON Process Controller, FCC Training Simulator, Pipeflow,
Pipedata PRO etc.
10. Vishwas Bhajandas Shende, 305, GH-11, Indianoil Apt, Faridabad – 121001 Haryana India
Phone: 0091-8527112099, 8800830448, vbs305@yahoo.com
Page 10 of 10
STRENGTH
Proactive, Facilitator, Critcal Thinker, Goal Oriented, Delegation of Responsibility, Self Confidence, Self
Motivated, Time Management, Leadership, Through Subject Knowledge, Strong Technical back up,
Comprehension and Analytical ability, Computer Literate & Excellent Writing skill, HSE competency.
LANGUAGES
English, Marathi, Hindi Fluent
PUBLICATIONS
− ”Non-Newtonian Fluid System Design: A Case Study” – Technical Paper in Outstanding Young Chemical
Engineers Conference & Compition – Organized by Indian Institute of Chemical Engineers 24th Mar 2012.
− “Impact of Additive Usage in Distillate Fluid Catalytic Cracking Operation” an article published in “Fluid
Catalytic Cracking III” Edited by Mario L. Occelli and Paul O'Connor , publish by Oxford University Press.
− “Additive plays a major role in improving FCC operation:, a technical paper
− “Process for the preparation of a CO-oxidation promoter” patent EP 0742044 (UK, Germany and
Netherlands) Canada 2149829.
− “A process for preparing fluid catalytic cracking (FCC) catalyst suitable for hydrocarbon conversion” US
patent 6114267EP 0957151 (UK and Netherlands patent).