Capstone Turbine develops, manufactures, and services microturbine technology for distributed power generation. As an authorized distributor, E-Finity supports customers in the mid-Atlantic and southeastern U.S. with factory-certified Capstone solutions. Capstone microturbines provide reliable electricity, hot water, and chilled water using a patented air bearing turbine in a simple modular design that is easy to operate and maintain.

1. Capstone Turbine
E-Finity Distributed Generation
The Power to be Independent
Authorized Capstone® Distributor

2. Capstone Turbine Corporation
Who is Capstone?
• Develops
• Manufactures
• Sells &
• Services
MicroTurbine Technology

3. The MicroTurbine Leader
• Founded 1988
• 1st company to introduce a
MicroTurbine
• 100% MicroTurbine focused
• 7000+ units sold and shipped
• Million’s of documented run
hours
50,000,000

4. Made in America
• “Made in America”
• 75+% US Steel
• USA owned and operated
• >100 Patents Worldwide
• ISO 9001:2000
• UL-2200 & 1741 certified

5. (1) Fuel (4) Benefits Out
1. Reliable Hot Water
2. Reliability Chilled Water
3. Reliable Electricity
4. Reliable Back-Up Power
 Clean & Green
 Local Power Generation
 Power When You Need It Where You
Need It

6. E-Finity

7. E-Finity Distributed Generation
The Power to be Independent
Mid-Atlantic & Southeastern Regions
Authorized Capstone® Distributor

8. E-Finity Actively Supports EPA

9. Active DOE Clean Energy Member

10. 9
Trade Associations

11. Factory Certified and Supported
E-Finity Provides Authorized Capstone:
Conceptual Design Approval (CA) Service’s
Factory Trained Installer Services (FTI)
Authorized Service Provider (ASP)
Long Term Maintenance (FPP)

12. Capstone
Technology

13. Single Stage Jet Engine
• 1750 F Combustion
• Recuperated
• 3 Air Bearings
• “Electronic” Gearbox
• Stand-Alone Capability

14. Single Stage Jet Engine
• 1750 F Combustion
• Recuperated
• 3 Air Bearings

15. • 1 moving part: Turbo Generator Shaft
Patented Air Bearing Turbine
Spring
Foil
Shaft
• Air bearings
 No oil or grease
• Air cooled
 No anti-freeze or liquids
• Variable speed 45,000 to 96,000 RPM

16. Worry Free Operation
Lowest Maintenance Available
• Air-Cooled
• One Moving Part
• Air Cooled Electronics
• No Lubricants or Antifreeze
• No Spark Plugs / Lifters, etc
• Complete Remote Monitoring & Trouble
Shooting
• No post-combustion devices or chemicals

17. Lowest Carbon Footprint
• Low emission design
• Super-low NOX
- Less than 9ppm
- .14 to .16 g/hb-br
Endorsed by the SCAQMD
• No additional Catalysis
requirement

18. Remote System Diagnostics
• Data Logging & Storage
– monitors and records key system
data 24x7
• Real-Time Notification
– alert and local CST Technician
notification
• Balance of Plant Interactivity
– monitoring of compressors, water
flow and temperatures, etc.

19. Capstone
Products

20. Capstone Turbine
•C30, C65, C200, C600, C800, C1000
•Natural Gas
•Propane
•Digester, Landfill and Goal Bed Methane

21. Simple Modular Solutions
Grid Connect
Stand Alone
Dual Mode
CHP App’s
HP Natural Gas
Landfill/Digester Gas
Sour Gas
Liquid Fuel & Propane
30 – 65 kW net output
Product Offerings

22. Simple Modular Solutions
65 kW Heat Recovery
Grid Connect
Stand Alone
Dual Mode
CHP App’s
HP Natural Gas
Landfill/Digester Gas
Sour Gas
Liquid Fuel & Propane
200 – 1000 kW net output
Product Offerings

23. C600 expandable to C800& C1000

24. Capstone
Solutions

25. Reliable Onsite Electric
Peak Shaving
Load Following
 Clean Reliable Back-up
Power
- Straight Line 60Hz @ 480 Volts

26. Integrated CHP Module
Heat Recovery
Module
Model C65
MicroTurbine

27. Integrate with Absorption Chillers
Every C65 MicroTurbine produces 20 Tons Chilled Water
Can be Exhaust Fired or Hot Water Fired

28. C200 with External HRM

29. Capstone C1000
Hot Water = 500 gpm
Chilled Water = 300 Tons
Steam = 3500 Mlbs/hr
1000 kW Clean Power

30. C1000 Series with Heat Recovery

31. Dual Mode System Controller
Islanding from Utility
• MT Monitors Utility Voltage
• Identifies Abnormality
• Opens Motorized Breaker
• Isolates BLDG from Utility
• DMSC verifies Island
• MT Sets back to Load State
Less than 5 Seconds

32. Dual Mode System Controller
Return to Utility
• Upon Utility Return the DMSC
• Sends Signal to MT to Start System Timer for
Reconnection (Customer Specified, Generally 5 Minutes)
• MT Disconnects & DMSC Closes Breaker
• System Resumes Normal Operation
• MT Begins Recharge Mode
MT Never Shuts Down

33. Factory Support
Services

34. PROPRIETARY AND CONFIDENTIAL Capstone Turbine Corporation
33
Capstone FPP Benefits
• 24 Hour Technical
Support
• Response time within
24 hours
• 24 Hour remote monitor
and alarming to
Capstone and
Customer

35. 34
Capstone Remote Monitoring
• Web access to sites
• Data Logging
• Alarming
• Remote trouble shooting
• Less windshield time

36. Capstone Preventative Maintenance
Servicing injectors at 20,000 hrs on a BP platform
Capstone MicroTurbine
8,000
Hours
Air Filters Clean/Replace
Fuel Filter Replace
Igniter Replace
20,000
Hours
Injectors Replace
Battery Pack Replace
Thermocouple Replace
40,000
Hours
Engine Exchange
• Typical Maintenance cost of $1.00 MTRH
• Average of 6 Hours of Planned mtn/Yr
• Capstone will guarantee cost of planned
and unplanned maintenance

37. Simple Overhaul in Minutes
 Four Bolts
 Disconnections
 Generally (2) 2 hours
Back on Line!

38. CHP
Plus & Minus

39. Reasons to Encourage CHP
• Lower carbon footprint (EPA)
• Power independence (DOE)
• Help meet Renewable Energy Portfolio Standard (States)
• Funds infrastructure upgrades & improvements
• Encourages the use of energy efficiency technologies
• Lowers energy costs
• Helps keep the door open
• Create new Green Job

40. Barriers inhibiting CHP
• Utility standby charges or ratchet penalties
• Electric utility discouragement (Cogen Killers)
• Incentives with “Open & Close “ window programs
• Onerous submission process
• 3rd party implementers add layers and costs
• Lack of value for net metering (export to grid)
• Looses to “Low Hanging Fruit”
• Lack of awareness (changing)

41. Additional Barriers ??
• Interconnection
• Permitting
• Financing
The biggest one
Lack of Parody for ITC’s
Solar / Wind = 30%
CHP = 10%
70-90% efficient yet the lowest ITC ????

42. E-Finity
Applications

43. Viking Yacht (NJ Manufacturer)
•NJ Incentive
•New Equipment
•100% Heating & AC
•40% Self Electric Generation
•Slashed Carbon Foot Print
Barrier > Incentive Challenges

44. York Sewer Authority (PA WWTF)
• PA DEP Incentive
• New Equipment
• Renewal Energy Project
• $300,000 Savings / Yr
• Significant Carbon Savings
• 100% US Made Products
Plus > Incentive Challenges

45. Gas Storage Site
Stand-A-Lone Site
•100% Site 3 Phase Power
•100% Building Heat & Fuel Gas Heating
• (4) C65 ICHP & (5) C65
•1st Commissioned 2006

46. Industrial Gas Plant

47. Electric & Hot Water

48. Combined Heat & Power
Fours Seasons Philadelphia

49. Combined Heat & Power
Fours Seasons Philadelphia
• 100% Hot Water
• 25% Building Electric
• 15% Building Heat
Emphasis was on:
•Controlling Energy Costs
•Reduce Greenhouse-Gas
Emissions

50. Tri-Generation
Philadelphia Gas Works
• Capstone C200 Turbine
• Hot Water Heat Exchanger
• 40 Ton Hot Water Absorber
• Capstone Logic Controller

51. Electric Load Following
UGI Headquarters
PPL Utility Meter set at 0kW
Capstone Makes 100% of Building Electric

52. Combined Heat & Power
Bristol Bridge
•100% Building Electricity
•100% Building Hydronic Heat
•Future 90Tons Absorption Chilling
Islanding Capable
Dedicated Back Up Power
for Exhaust Hood
Containing Dangers
Fumes

53. Heating / Cooling/ Islanding CHP
Salem College, New Jersey
Red Cross Disaster Relief Facility
•195kW Electric Load Following
•100% Hot Water
•100% Chilled Water
•Island / Stand Alone Site

54. Questions & Answers