Suresh N seeks a position to utilize his 3 years and 10 months of experience in power electronics design. He has worked on projects involving automated test equipment, power supply boards, EMI filters, motor drive debugging, and test procedure preparation. His education includes a B.E. in electronics and communication engineering. He has experience with Mentor Graphics and designing power supplies, including isolated DC-DC converters, for applications such as satellites, aviation, and missiles.

1. RESUME
S/O P.Nagendhiran,
SURESH.N 5/429 Melbharathinagar,
Kilinjada (P.O),
Coonoor(T.K)
The Nilgiris (D.T).
EMIL ID: rani.nagu@gmail.com
PHONE NO: +918098540207
OBJECTIVE:
Seeking a position to utilize my skills and abilities in leading firms that helps
Professional growth.
EXPERIENCE:
Company Name Data Patterns, Chennai
Year 3 Year 6 Months (2011 to 2015)
Experience Summary 3 Year and 6 Months of experience in Automated Test
Equipment(ATE) system design & power supply board & EMI
filter designing, development & testing
Company Name HCL technologies, Chennai
Year 4 months (2014 to 2015)
Experience Summary 1 Month Worked in power electronics motor drive debugging.
3 Months Worked in Test procedure preparation for IO
interface board.
Total experience: 3 Year and 10 months
EDUCATIONAL QUALIFICATION:
course Name of Institute Course
duration
% Marks
B.E (ECE)
Coimbatore Institute of
Engineering and Technology,
Coimbatore.
2007-2011 8.40(CGPA)
H.S.C
St. Antony’s Higher
Secondary School, Coonoor. 2005-2007 83
S.S.L.C
Little Flower High School,
Selas. 2004-2005 82
PERSONAL DETAILS:

2. Name : Suresh.N.
Date of birth : 24.12.1989
Sex : Male.
Marital Status : Single.
Nationality : Indian.
Permanent : 5/429, Melbharathinagar,
Address Kilinjada(P.O),
Coonoor(T.K)
The Nilgiris(D.T).
Languages Known : English, Tamil.
Hobbies : Listening songs, Reading books,
Playing cricket.
SOFTWARE EXPOSURE:
 Operating System : Mentor graphics, Dx designer
 Language known : C
AREA OF INTEREST:
 Digital electronics
 Microcontroller
 Power supply design
PROJECTS ACCOMPALISHED:
3U VPX 28V input power supply module with holdup function
Description The power supply module is designed with 3U VPX form factor, it
converts 28VDC input into 5VDC using isolated DC-DC converter and
converts 5VDC into 3.3VDC using buck converter. It provides 50msec
hold up function as per MIL-STD-704F for 110W.
Role Designing
Tools Dx designer
Contribution  Designing
Power supply filtering and switching module
Description The module provides filtering for the 28V input to meet MIL-STD-
461E and ON/OFF control based on the external signal. To self-protect
the system the power supply module provides latched shut down
function based on the control signal received from the processor. The
Latched OFF control will be released by cycling the 28V input or
external ON/OFF signal.
Role Designing

3. Tools Dx designer
Contribution  Designing
Solar powered MPPT based power supply module for satellite
Description The solar power is converted into electrical power using solar
panel and it is used to provide the required power for the sub modules
and also used to charge battery. Battery power is used to power the sub
modules in eclipse period. It contains power distribution module for
power management, ADC & FPGA is used to monitor the output
current & Control the current flowing for the sub modules.
Role Designing
Tools Dx designer
Contribution  Designing
28V to 12V and 5V Isolated power Supply Module
Description The power supply module receives 28V input from two external
power supply module and OR-ed using ORing diode. The OR-ed input
supply voltage is filtered using EMI Filter to meet MIL-STD-461E and
it meets MIL-STD-704E standard. The EMI filtered 28V supply is
converted in to 12V using isolated DC-DC converter and the 12V is
converted in to 5V using buck converter.
Role Designing, Development
Tools Mentor graphics
Contribution  Designing & testing of the power supply module
28V & 3.3V Isolated power Supply Module
Description The power supply module converts the 28V input into isolated
28VDC, & 3.3VDC using isolated DC-DC converters & separate EMI
filter to suppress the EMI/EMC noise at the Input side.
Role Designing, Development
Tools Mentor graphics
Contribution  Designing & testing of the power supply module

4. 28V,1000W Power supply Module
Description The power supply module converts the 230V input into 28VDC,
36A output, it incorporates EMI filter to suppress the EMI/EMC noise
at the Input side.
Role Designing, Development
Tools Mentor graphics
Contribution  Designing & testing of the power supply module
 Mechanical design consideration & thermal analysis
Fire control checkout system for Nirbhay
Description The project is used to verify the functionalities of the missile and
verification of the data communication between the missiles and check
out system before launch.
Role Developer
Contribution  System design consideration
 Software design support
 Harness fabrication detail preparation
 Testing & customer interaction
DECLARATION:
I hereby declare that the above furnished particulars are true to the best of my
knowledge and belief.
Date :
(SURESH.N)