More Related Content
Similar to gear box for a linear axis Dynagear30 :1 (20)
More from Stadler Michael (20)
gear box for a linear axis Dynagear30 :1
- 1. T H E G E A R C O M P A N Y
© 08/20 I Nidec GRAESSNER GmbH & Co. KG I THE GEAR COMPANY
Hypoid bevel gearbox:
▪ Single stage bevel gearbox with ratio 30:1
▪ High performance
▪ compact design, no abrasive wear
▪ Efficiency of the bevel gearset > 92%
Best gearbox for all linear axis
DYNAGEAR D115 i=30:1
Nominal torque T2N [Nm] 140
Max. acceleration „ T2B [Nm] 180
Emergency stop torque ƒ T2Not [Nm] 200
Max. input speed n1max [min-1] 6000
Nominal input speed n1N [min-1] 1300
Standard backlash • jt [arcmin] <4
Torsional output stiffness… Ct21 [Nm/arcmin] 23
Radial force ‚ F2Rmax [N] 10000
Axial force ‚ F2Amax [N] 5000
Efficiency at full load h [%] >85
Running noise (n1=3000 min-1) LpA [dB(A)] ≤68
Approx. weight m [kg] 15,5
at the output, assuming 2% load
point of force application centre of output shaft at an
output speed of 400 min-1
![T H E G E A R C O M P A N Y
© 08/20 I Nidec GRAESSNER GmbH & Co. KG I THE GEAR COMPANY
Hypoid bevel gearbox:
▪ Single stage bevel gearbox with ratio 30:1
▪ High performance
▪ compact design, no abrasive wear
▪ Efficiency of the bevel gearset > 92%
Best gearbox for all linear axis
DYNAGEAR D115 i=30:1
Nominal torque T2N [Nm] 140
Max. acceleration „ T2B [Nm] 180
Emergency stop torque ƒ T2Not [Nm] 200
Max. input speed n1max [min-1] 6000
Nominal input speed n1N [min-1] 1300
Standard backlash • jt [arcmin] <4
Torsional output stiffness… Ct21 [Nm/arcmin] 23
Radial force ‚ F2Rmax [N] 10000
Axial force ‚ F2Amax [N] 5000
Efficiency at full load h [%] >85
Running noise (n1=3000 min-1) LpA [dB(A)] ≤68
Approx. weight m [kg] 15,5
at the output, assuming 2% load
point of force application centre of output shaft at an
output speed of 400 min-1](https://image.slidesharecdn.com/dynagear30-1-200821081933/85/gear-box-for-a-linear-axis-Dynagear30-1-1-320.jpg)
