The document describes the T1B1B1B1B Series street light featuring modular pluggable technology, honeycomb briquette burning effect, double coupling IP68 protection, and ergonomic light distribution. It is available in white, gray, or black colors for street lighting, parking lots, roadways, or paths. Key specifications include input voltage range, power, lumens, lighting distributions, LED brand and color temperature, housing material, and dimensions. Installation and maintenance instructions are provided.

1. Specifications
Street Light TStreet Light TStreet Light TStreet Light T1B1B1B1B SeriesSeriesSeriesSeries
Features
Modular pluggable technology, easy tool onsite maintenance;
Honeycomb briquette burning effect and the whole structure cooling
technology;
Double-coupling IP68 protection, highest waterproof level;
Metal structure, high mechanical strength;
Ergonomic light distribution to achieve uniform illuminating effect;
Free modular serialization and full power range solution.
Applications
Street lighting
Parking lots
Roadway lighting
Path lighting
Standard Colors
White
Gray
Black
Advantages
Air Convection Effect Whole-structure Heat Dissipation
Double-coupling IP68 Protection Tool-less Maintenance
High-efficacy LED Light Source Flexible Combinations of Modules

2. Specifications
Street Light TStreet Light TStreet Light TStreet Light T1B1B1B1B SeriesSeriesSeriesSeries
Electrical & Photometric
Model
Input Voltage
(V)
Frequency
Range
(Hz)
Drive
Current
(mA)
Power
(w)
Luminous
Efficacy
(lm/w)
Lumens
(lm)
Power
Factor
Power
Efficiency
Light
Distributions
LED
Brand
CCT
(k)
CRI
T1B-1
AC100-240
50/60
700 40 110 ± 5 4400±200
0.95 88%
Batwing
(Type I II III IV
IV)
Lumileds
3000
4000
5000
5700
≥70
860 50 105 ±5 5250 ±250
1050 60 100 ± 5 6000±300
T1B-2
700 80 110± 5 8800±400
0.95 91%860 100 105 ±5 10500±500
1050 120 100± 5 12000±600
*Surge Protection: 10KV.
Working environment & Packing
Model
Working
Environment
Storage
Temperature
IP Rating
LED Life
Span (h)
Housing
Material
Pole
Diameter
(mm)
Product
Dimensions
(mm)
Carton Size
(mm)
N.W
(kg)
G.W
(kg)
T1B-1
-40℃~+50℃,
10%~90%RH.
-40℃~+50℃
LED Module
IP68
Power Supply
IP67
>50,000
Aluminum
Alloy
57-63 500*295*88 600*380*180
4.0 5.1
T1B-2 4.9 6.0
Warranty
5-year limited warranty is standard on luminaire and components.

3. Specifications
Street Light TStreet Light TStreet Light TStreet Light T1B1B1B1B SeriesSeriesSeriesSeries
Light Distributions
★M8B LED module
T2S2321 T2S1324 T2S2201
IESNA Type II Short IESNA Type II Short IESNA Type II Short
T2S2322 T3M1321
IESNA Type II Short IESNA Type III Medium

4. Specifications
Street Light TStreet Light TStreet Light TStreet Light T1B1B1B1B SeriesSeriesSeriesSeries
External Design Features
Waste Shape Holes
Prevent leafs or part of tree
falling inside
Aluminum Housing
Driver Internal Design
Driver clings to the housing
surface for better heat
conduction.
Optical IP68 LED Module
Easy for installation, replacement and
maintenance
2 X Latches Design
Tool free maintenance
Lamp Pole to be prepared by User
Suitable for pole bracket diameter 57-63mm

5. Specifications
Street Light TStreet Light TStreet Light TStreet Light T1B1B1B1B SeriesSeriesSeriesSeries
Internal Design Features
Mounting Bracket
With 4 stainless steel screws
LED Driver
Waterproof Cable Connectors

6. Specifications
Street Light TStreet Light TStreet Light TStreet Light T1B1B1B1B SeriesSeriesSeriesSeries
Dimensions
T1B -1 -2
L 500mm(1 ft 7
11
/16 inch)
W 295mm (11
39
/64 inch)
H 90mm (3
35
/64 inch)
D φ57-φ63mm (2
1
/4 inch -2
31
/64 inch)
295 88
500
295 88
500
T1B-1
T1B-2

7. Specifications
Street Light TStreet Light TStreet Light TStreet Light T1B1B1B1B SeriesSeriesSeriesSeries
Installation
1. Pull the two latches at side, then
open the cover.
2. Loosen the four screws on the
mounting bracket.
3. Connect the ground wire, neutral
wire and live wire to the AC input
(make sure it sufficiently grounded).
4. Insert the pole to the lamp after
connecting the wire.
5. Tighten up the screws on the
mounting bracket.
6. Close the cover, then press and
fasten the latches.

8. Specifications
Street Light TStreet Light TStreet Light TStreet Light T1B1B1B1B SeriesSeriesSeriesSeries
Maintenance
Driver & Electrical Parts
1. Pull the two latches at side, then
open the cover.
2. Disconnect the driver from the AC
input.
3. Unscrew the screws at ends of the
driver.
4 Unscrew the waterproof connector to
the driver
5. Replace the failed driver with a new
one. Tighten up all the screws and the
connector. Re-connect to the wires of
AC input.
6. Close the cover. Then press and
fasten the latches.

9. Specifications
Street Light TStreet Light TStreet Light TStreet Light T1B1B1B1B SeriesSeriesSeriesSeries
Module
1. Pull the two latches at side, then
open the cover.
2. Unscrew the two screws at ends of
the failed module.
3. Unscrew the waterproof connector to
the failed module.
4. Take out the failed module and
replace with a new one.
5. Align and tighten up the connector,
and the screws for the new module.
6. Close the cover. Then press and
fasten the latches.

10. Specifications
Street Light TStreet Light TStreet Light TStreet Light T1B1B1B1B SeriesSeriesSeriesSeries
Connectors Operation Guide
Spin the male terminal clockwise. When the male indicatrix points between indicatrix female #2 and #3, and the gap
between male and female terminals is extremely small, the connectors are well connected; otherwise, there will be risks in
its waterproof performance.
When the gap between male and female terminals is extremely small, if any looseness can be sensed, please spin the male
terminal clockwise until tight.