SlideShare a Scribd company logo
1 of 4
PRODUCT DESIGN AND
DEVELOPMENT
UNIT III PRODUCT
ARCHITECTURE
TOPIC-6 FUNDAMENTAL AND
INCIDENTAL INTERACTIONS
1
FUNDAMENTAL AND INCIDENTAL
INTERACTIONS
• Most likely a different person or group will be
assigned to design each chunk.
• Because the chunks interact with one another
in both planned and unintended ways, these
different groups will have to coordinate their
activities and exchange information.
• In order to better manage this coordination
process, the team should identify the known
interactions between chunks during the
system- level design phase.
2
There are two categories of interactions
between chunks.
• First, fundamental interactions are those
corresponding to the lines on the schematic
that connect the chunks to one another.
• Second, incidental interactions are those that
implementatio
n
3
arise because of the particular
physical
of functional elements or
becauseof the geometric arrangement of
the chunks.
FUNDAMENTAL AND INCIDENTAL
INTERACTIONS
• While the fundamental interactions
are
explicitly represented
showing the
clustering
by the
schematic of
elements into
chunks, the incidental interactions must be
documented in some other way.
• For a small number of interacting chunks
an interaction graph is a convenient way
to represent the incidental interactions.
4
FUNDAMENTAL AND INCIDENTAL
INTERACTIONS

More Related Content

What's hot

Design process
Design processDesign process
Design processrashmi322
 
Design and fabrication of motorized screw jack
Design and fabrication of motorized screw jackDesign and fabrication of motorized screw jack
Design and fabrication of motorized screw jackshashin vyas
 
Rapid Prototyping and its Applications
Rapid Prototyping and its ApplicationsRapid Prototyping and its Applications
Rapid Prototyping and its Applicationsmalikusman
 
AESTHETICS AND ERGONOMICS
AESTHETICS  AND ERGONOMICS AESTHETICS  AND ERGONOMICS
AESTHETICS AND ERGONOMICS SANDIP THORAT
 
FOUR BAR CHAIN AND INVERSIONS
FOUR BAR CHAIN AND INVERSIONSFOUR BAR CHAIN AND INVERSIONS
FOUR BAR CHAIN AND INVERSIONSsaahil kshatriya
 
Low cost automation
Low cost automationLow cost automation
Low cost automationIshwar Bhoge
 
Hermite cubic spline curve
Hermite cubic spline curveHermite cubic spline curve
Hermite cubic spline curveDeepak Antil
 
Non-Pnuematic (Airless tyres) seminar report
Non-Pnuematic (Airless tyres) seminar reportNon-Pnuematic (Airless tyres) seminar report
Non-Pnuematic (Airless tyres) seminar reportMONISHRAZZA
 
Pneumatic Sheet Metal Shearing Machine - Project report
Pneumatic Sheet Metal Shearing Machine - Project reportPneumatic Sheet Metal Shearing Machine - Project report
Pneumatic Sheet Metal Shearing Machine - Project reportTejas Inamdar
 
methods to draw inflection circle
 methods to draw inflection circle methods to draw inflection circle
methods to draw inflection circlesabiha khathun
 
Cad cam input output devices
Cad cam input output devicesCad cam input output devices
Cad cam input output devicesJagilam Kumar
 
Antifriction Bearing Life
Antifriction Bearing LifeAntifriction Bearing Life
Antifriction Bearing LifeJames Simonelli
 

What's hot (20)

Design process
Design processDesign process
Design process
 
STEAM JET COOLING SYSTEM
STEAM JET COOLING SYSTEMSTEAM JET COOLING SYSTEM
STEAM JET COOLING SYSTEM
 
Design and fabrication of motorized screw jack
Design and fabrication of motorized screw jackDesign and fabrication of motorized screw jack
Design and fabrication of motorized screw jack
 
Rapid Prototyping and its Applications
Rapid Prototyping and its ApplicationsRapid Prototyping and its Applications
Rapid Prototyping and its Applications
 
cAdaptive control
cAdaptive controlcAdaptive control
cAdaptive control
 
AESTHETICS AND ERGONOMICS
AESTHETICS  AND ERGONOMICS AESTHETICS  AND ERGONOMICS
AESTHETICS AND ERGONOMICS
 
FOUR BAR CHAIN AND INVERSIONS
FOUR BAR CHAIN AND INVERSIONSFOUR BAR CHAIN AND INVERSIONS
FOUR BAR CHAIN AND INVERSIONS
 
Low cost automation
Low cost automationLow cost automation
Low cost automation
 
Hermite cubic spline curve
Hermite cubic spline curveHermite cubic spline curve
Hermite cubic spline curve
 
Non-Pnuematic (Airless tyres) seminar report
Non-Pnuematic (Airless tyres) seminar reportNon-Pnuematic (Airless tyres) seminar report
Non-Pnuematic (Airless tyres) seminar report
 
Airbags ppt
Airbags pptAirbags ppt
Airbags ppt
 
Pneumatic Sheet Metal Shearing Machine - Project report
Pneumatic Sheet Metal Shearing Machine - Project reportPneumatic Sheet Metal Shearing Machine - Project report
Pneumatic Sheet Metal Shearing Machine - Project report
 
methods to draw inflection circle
 methods to draw inflection circle methods to draw inflection circle
methods to draw inflection circle
 
mechanism
mechanismmechanism
mechanism
 
Cad cam input output devices
Cad cam input output devicesCad cam input output devices
Cad cam input output devices
 
Vibration measuring instruments
Vibration measuring instrumentsVibration measuring instruments
Vibration measuring instruments
 
Steam Condensers
Steam CondensersSteam Condensers
Steam Condensers
 
ED7104 VAC_notes
ED7104 VAC_notesED7104 VAC_notes
ED7104 VAC_notes
 
Design for fluctuating loads
Design for fluctuating loadsDesign for fluctuating loads
Design for fluctuating loads
 
Antifriction Bearing Life
Antifriction Bearing LifeAntifriction Bearing Life
Antifriction Bearing Life
 

More from Dr.R. SELVAM

7 breakeven analysis
7 breakeven analysis7 breakeven analysis
7 breakeven analysisDr.R. SELVAM
 
6 fixed assets, current assets, depreciation methods
6 fixed assets, current assets, depreciation methods6 fixed assets, current assets, depreciation methods
6 fixed assets, current assets, depreciation methodsDr.R. SELVAM
 
5 preparation and interpretation of balance sheets
5 preparation and interpretation of balance sheets5 preparation and interpretation of balance sheets
5 preparation and interpretation of balance sheetsDr.R. SELVAM
 
4 acounting principle
4 acounting principle4 acounting principle
4 acounting principleDr.R. SELVAM
 
3 capital structure
3 capital structure3 capital structure
3 capital structureDr.R. SELVAM
 
1 sources of finance
1 sources of finance1 sources of finance
1 sources of financeDr.R. SELVAM
 
4 b. capital budgeting and cost analysis performance evaluation
4 b. capital budgeting and cost analysis   performance evaluation4 b. capital budgeting and cost analysis   performance evaluation
4 b. capital budgeting and cost analysis performance evaluationDr.R. SELVAM
 
4 a. capital budgeting and cost analysis
4 a. capital budgeting and cost analysis4 a. capital budgeting and cost analysis
4 a. capital budgeting and cost analysisDr.R. SELVAM
 
3 capital budgeting
3 capital budgeting3 capital budgeting
3 capital budgetingDr.R. SELVAM
 
1 current assement management
1 current assement management1 current assement management
1 current assement managementDr.R. SELVAM
 
2 b. project termination
2 b. project termination2 b. project termination
2 b. project terminationDr.R. SELVAM
 
2 a. project auditing
2 a. project auditing2 a. project auditing
2 a. project auditingDr.R. SELVAM
 
1 b, evaluation of project
1 b, evaluation of project1 b, evaluation of project
1 b, evaluation of projectDr.R. SELVAM
 
1 a, monitoring and evaluation of PM
1 a, monitoring and evaluation of PM1 a, monitoring and evaluation of PM
1 a, monitoring and evaluation of PMDr.R. SELVAM
 
3 industrial hydraulic circuits shapping, milling, drilling
3 industrial hydraulic circuits   shapping, milling, drilling3 industrial hydraulic circuits   shapping, milling, drilling
3 industrial hydraulic circuits shapping, milling, drillingDr.R. SELVAM
 
2 maintenance of hydraulic systems
2 maintenance of hydraulic systems2 maintenance of hydraulic systems
2 maintenance of hydraulic systemsDr.R. SELVAM
 
1 hydraulic troubleshooting
1 hydraulic troubleshooting1 hydraulic troubleshooting
1 hydraulic troubleshootingDr.R. SELVAM
 
3 c. industrial pneumatic circuit logic
3 c. industrial pneumatic circuit   logic3 c. industrial pneumatic circuit   logic
3 c. industrial pneumatic circuit logicDr.R. SELVAM
 

More from Dr.R. SELVAM (20)

7 breakeven analysis
7 breakeven analysis7 breakeven analysis
7 breakeven analysis
 
6 fixed assets, current assets, depreciation methods
6 fixed assets, current assets, depreciation methods6 fixed assets, current assets, depreciation methods
6 fixed assets, current assets, depreciation methods
 
5 preparation and interpretation of balance sheets
5 preparation and interpretation of balance sheets5 preparation and interpretation of balance sheets
5 preparation and interpretation of balance sheets
 
4 acounting principle
4 acounting principle4 acounting principle
4 acounting principle
 
3 capital structure
3 capital structure3 capital structure
3 capital structure
 
1 sources of finance
1 sources of finance1 sources of finance
1 sources of finance
 
2 term loan
2 term loan2 term loan
2 term loan
 
4 b. capital budgeting and cost analysis performance evaluation
4 b. capital budgeting and cost analysis   performance evaluation4 b. capital budgeting and cost analysis   performance evaluation
4 b. capital budgeting and cost analysis performance evaluation
 
4 a. capital budgeting and cost analysis
4 a. capital budgeting and cost analysis4 a. capital budgeting and cost analysis
4 a. capital budgeting and cost analysis
 
3 capital budgeting
3 capital budgeting3 capital budgeting
3 capital budgeting
 
2 working capital
2 working capital2 working capital
2 working capital
 
1 current assement management
1 current assement management1 current assement management
1 current assement management
 
2 b. project termination
2 b. project termination2 b. project termination
2 b. project termination
 
2 a. project auditing
2 a. project auditing2 a. project auditing
2 a. project auditing
 
1 b, evaluation of project
1 b, evaluation of project1 b, evaluation of project
1 b, evaluation of project
 
1 a, monitoring and evaluation of PM
1 a, monitoring and evaluation of PM1 a, monitoring and evaluation of PM
1 a, monitoring and evaluation of PM
 
3 industrial hydraulic circuits shapping, milling, drilling
3 industrial hydraulic circuits   shapping, milling, drilling3 industrial hydraulic circuits   shapping, milling, drilling
3 industrial hydraulic circuits shapping, milling, drilling
 
2 maintenance of hydraulic systems
2 maintenance of hydraulic systems2 maintenance of hydraulic systems
2 maintenance of hydraulic systems
 
1 hydraulic troubleshooting
1 hydraulic troubleshooting1 hydraulic troubleshooting
1 hydraulic troubleshooting
 
3 c. industrial pneumatic circuit logic
3 c. industrial pneumatic circuit   logic3 c. industrial pneumatic circuit   logic
3 c. industrial pneumatic circuit logic
 

Unit 3.7 related system level design issues

  • 1. PRODUCT DESIGN AND DEVELOPMENT UNIT III PRODUCT ARCHITECTURE TOPIC-6 FUNDAMENTAL AND INCIDENTAL INTERACTIONS 1
  • 2. FUNDAMENTAL AND INCIDENTAL INTERACTIONS • Most likely a different person or group will be assigned to design each chunk. • Because the chunks interact with one another in both planned and unintended ways, these different groups will have to coordinate their activities and exchange information. • In order to better manage this coordination process, the team should identify the known interactions between chunks during the system- level design phase. 2
  • 3. There are two categories of interactions between chunks. • First, fundamental interactions are those corresponding to the lines on the schematic that connect the chunks to one another. • Second, incidental interactions are those that implementatio n 3 arise because of the particular physical of functional elements or becauseof the geometric arrangement of the chunks. FUNDAMENTAL AND INCIDENTAL INTERACTIONS
  • 4. • While the fundamental interactions are explicitly represented showing the clustering by the schematic of elements into chunks, the incidental interactions must be documented in some other way. • For a small number of interacting chunks an interaction graph is a convenient way to represent the incidental interactions. 4 FUNDAMENTAL AND INCIDENTAL INTERACTIONS