Resume37

RESUME
RUBEN GENARO FLORES
CURRENT ADDRESS
3410 Oregon Drive, Unit #A
Anchorage, Alaska 99517
home (907) 278-0290
mobile (907) 980-2098
PERMENANT ADDRESS
5619 Turtle Creek
Houston, Texas 77017
home (713) 378-5396
mobile (713) 882-8257
e-mail roob@swbell.net
OCCUPATION
I&C Design Lead
Principle E/I Designer
EI&C Checker
GENERAL SUMMATION OF ENGINEERING EXPERIENCE
ELECTRICAL FACILITIES DESIGN
Industrial and Commercial : All phases of electrical design, plant and office lighting,
class 100 clean rooms, chemical lab, grounding, cable tray systems, motor control
center arrangements, schematic and wiring diagrams, computer room installations,
underground and exposed conduit.
ELECTRICAL INDUSTRIAL DESIGN
Petro-chemical : Original control schematics, one line diagrams, wiring and
interconnection diagrams, programmable logic controllers, motor control center
arrangements, cable tray and conduit systems, underground duct bank systems,
instrumentation, lighting, heat trace systems, grounding, hazardous area design and
material take-off. Manhour estimates, project schedules, project status and weekly
project meetings.
INSTRUMENT INDUSTRIAL DESIGN
Petro-chemical : Process and instrument diagrams, programmmable logic controllers
(BPCS and SIS), flow computers, loop diagrams, fire and gas detection systems,
computer room installations, closed-circuit television, fiber-optic systems, cable block
diagrams, control panel layouts, I/O schematic diagrams, connection diagrams, junction
boxes, wiring diagrams, annunciator panel layout, logic diagrams, cause and effect
matrix, and material take-off. Manhour estimates, project schedules, project status and
weekly project meetings.
ELECTRICAL POWER DESIGN
Coal-fired and Gas-fired Generating Stations : Original control schematics, one line
diagrams, wiring and interconnection diagrams, programmable logic controllers, motor
control center arrangements, cable tray and conduit systems, underground duct bank
systems, instrumentation, lighting, grounding, hazardous area design and material take-
off.
c:my documentsdocum entsresu m e 37.doc

RUBEN GENARO FLORES
ELECTRICAL PIPELINE DESIGN
Gas & Liquid Compressor and Meter Stations : Original control schematics, one line
diagrams, wiring and interconnection diagrams, programmable logic controllers (BPCS
and SIS), motor control center arrangements, variable frequency drives, cable tray and
conduit systems, underground duct bank systems, instrumentation, lighting, grounding,
hazardous area design and material take-off. Manhour estimates, project schedules,
project status and weekly project meetings.
ELECTRICAL MARINE DESIGN
Off-Shore, Fixed & Drillship : Power distribution, cable tray systems, lighting systems,
navigational lights, general alarm systems, emergency shutdown system, grounding and
material take-off. Subject to A. B. S. approval.
FIELD EXPERIENCE
I/E Inspection, field survey of existing equipment, as-built drawings, assist field in plant
check-out and start-up.
Experience
Nov 2011 - URS E&C Division, Anchorage, Alaska
Aug 2015 I&C Design Lead : Process and instrument diagrams, instrument loop diagrams,
programmmable logic controllers (BPCS and SIS) Siemens S7 and Bailey Net
90, ROC 827 flow computer, cable block diagrams, control panel layouts, I/O
schematic diagrams, connection diagrams, junction boxes, wiring diagrams,
instrument location plans, cable routing plans, conduit and cable schedules,
instrument index, I/O list, cable tag list, wire tag list, nameplate tag list,
datasheet index, datasheets, MTO index, MTO, installation details and
hazardous area design using AutoCad 2007 CAD System. I&C Design Lead on
CPF2 Fuel Gas Conversion on the North Slope for ConocoPhillips Alaska Inc.
I&C Checker : CPF1 Fuel Gas Conversion on the North Slope for ConocoPhillips
Alaska Inc.
I&C Design Lead : Process and instrument diagrams, instrument loop diagrams,
programmmable logic controllers (BPCS and SIS) Siemens S7, ROC 827 flow
computer, cable block diagrams, control panel layouts, I/O schematic diagrams,
connection diagrams, junction boxes, wiring diagrams, instrument location plans,
cable routing plans, REIM, conduit and cable schedules, instrument index, I/O
list, cable tag list, wire tag list, nameplate tag list, datasheet index, datasheets,
MTO index, MTO, installation details and hazardous area design using AutoCad
2007 CAD System. I&C Design Lead on OPL Fuel Gas Conversion on the North
Slope for ConocoPhillips Alaska Inc.
I&C Design Lead : Process and instrument diagrams, instrument loop diagrams,
programmmable logic controllers (BPCS and SIS) Siemens S7, cable block
diagrams, control panel layouts, I/O schematic diagrams, connection diagrams,
junction boxes, wiring diagrams, instrument location plans, cable routing plans,
REIM, VSD module, Producer and Injector Wellhouses, conduit and cable
schedules, instrument index, I/O list, cable tag list, wire tag list, nameplate tag
list, datasheet index, datasheets, MTO index, MTO, installation details and
hazardous area design using AutoCad 2007 and SmartPlant 3D/2D Cad
Systems. I&C Design Lead on DS1H NEWS drillsite expansion on the North
Slope for ConocoPhillips Alaska Inc.
Sept 2010 - Under contract to Anvil Alaska, Anchorage, Alaska
Nov 2011 Lead Sr Electrical & Control Systems Designer : Process and instrument
diagrams, instrument loop diagrams, one line diagrams, junction boxes, motor

RUBEN GENARO FLORES
control schematics, block diagrams, wiring and interconnection diagrams, panel
layout and BOM drawings, above and underground plan drawings, panel
schedules, hazardous area design and material take-off using AutoCad 2006
CAD system. Lead E & C Designer on Generator Replacement at Pump Station
No.6 for Alyeska Pipeline Service Company. This required attending weekly
project meetings, manhour estimates and project statusing.
Sr Electrical & Control Systems Designer: : Process and instrument diagrams,
instrument installation details using AutoCad 2006 CAD system. Sr. E & C
Designer on HPNA Removal Unit for Tesoro Refinery.
Lead Sr Electrical & Control Systems Designer: Process and instrument
diagrams, instrument loop diagrams, one line diagrams, junction boxes, motor
control schematics, block diagrams, fire and gas detection systems, wiring and
interconnection diagrams, panel layout and BOM drawings, above and
underground plan drawings, panel schedules, hazardous area design and
material take-off using AutoCad 2006 CAD system. Lead E & C Designer on
East/West Metering Building Freeze Protection at Valdez Marine Terminal for
Alyeska Pipeline Service Company. This required field trips, attending weekly
project meetings, manhour estimates and project statusing.
Oct. 2009 - Under contract to ASRC Energy Services, Anchorage, Alaska
Aug 2010 Principle E/I Designer : Process and instrument diagrams, junction boxes, wiring
and interconnection diagrams, hazardous area design and material take-off
using AutoCad 2004 CAD system. Install Heat Trace Terminal Boxes at GC3
Tank 8512 Recommissioning for BP Prudhoe Bay (WOA).
Principle E/I Designer : Electrical and Instrument Checker for Chops Pilot Phase
1 Interconnects at MPU S Pad for BP Prudhoe Bay (WOA).
Principle E/I Designer : Electrical and Instrument Checker for various modules at
Nikaitchuq - Oliktok Point Pad for ENI (OPP).
Principle E/I Designer : Electrical and Instrument Checker for Heater
Replacement at GC2 Flare Liquids Removal Mod 40 for BP Prudhoe Bay
(WOA).
Lead Principle E/I Designer : Process and instrument diagrams, programmmable
logic controllers, loop diagrams, junction boxes, wiring and interconnection
diagrams, heat trace isometrics, grounding, hazardous area design and material
take-off using AutoCad 2004 CAD system. Install A-B Micro-Logics 1400 PLC at
GC1 Flare Liquids Removal Mod 40 for BP Prudhoe Bay (WOA).
Oct. 2005 - Under contract to NANA/Colt Engineering, LLC Anchorage, Alaska
Oct. 2009 Principle E/I Designer : Electrical and Instrument Checker for Well Tie-ins at
Kuparuk for Conoco/Phillips.
Principle E/I Designer : Process and instrument diagrams, programmmable logic
controllers, loop diagrams, fiber-optic systems, junction boxes, wiring and
interconnection diagrams, grounding, hazardous area design and material take-
off using AutoCad 2004 CAD system. Install Tracerco Level Profiler Transmitter
and PLC at GC2 B Bank Dehydrator for BP Prudhoe Bay (WOA).
off using AutoCad 2004 CAD system. Install Tracerco Level Profiler Transmitter
and PLC at GC2 D Bank Dehydrator and Slugcatcher for BP Prudhoe Bay
(WOA).
Principle E/I Designer : Electrical and Instrument Checker of the instrument
interconnects and turbine controls for new compressor at Beluga River Unit for
Conoco/Phillips.
Principle E/I Designer : Electrical and Instrument Checker of the turbine controls
for LNG Compressor Replacement at Kenia for Conoco/Phillips.

RUBEN GENARO FLORES
off using AutoCad 2004 CAD system. Install Production Heater H-1E02 at
Kaparuk DS1E WSAK for Conoco/Phillips.
controllers (Seimens and Honeywell), heating and ventilation control panels,
loop diagrams, junction boxes, wiring and interconnection diagrams, grounding,
hazardous area design and material take-off using AutoCad 2004 CAD system.
Lead E/I Designer for O & M (Plant Engineering) Group. H & V Repairs 2007 for
GC2, GC3 and GC1 Skid 18 Gas Compressor for BP Prudhoe Bay (WOA).
March 2002 - The Automation Group Houston, Texas
Oct. 2005 Principle Control Systems Designer : Electrical cable tray distribution system
(4160v and below), relay panel layouts and wiring diagrams, motor schematics,
wiring and interconnection diagrams using AutoCad 2002 CAD system. Upgrade
Bently – Nevada Vibration System for multiple compressors at Shell Oil
Company.
Principle Control Systems Designer : Field survey of existing Leeds & Northrop
Combustion Controls Cabinet, Bailey Net 90 Cabinet, Yokogawa Recorders and
Datalogger for DCS upgrade in Coal-Fired Power Plant at Rock River,
Wisconsin for Alliant Energy. This involved creating a Master I/O Database,
wiring and connection diagrams using AutoCad 2002 CAD system.
Principle Control Systems Designer : Field survey of existing Main Control Board
for DCS upgrade in Coal-Fired Power Plant at Columbia, Wisconsin for Alliant
Energy. This involved creating a Master I/O Database, motor schematics, wiring
and connection diagrams AutoCad 2002 CAD system .
Principle Control Systems Designer : Field survey of existing fiber optic, alarm
and CCTV cables for new Central Control Room installation in Valero Refinery at
Texas City. This involved creating a Master Fiber Optic Cable Database, fiber
optic cable routing plans and details, underground conduit routing plan and
details, aboveground conduit routing plans and details, conduit and cable
schedules, and installation details.
Principle Control Systems Designer : Electrical cable tray distribution system
(480v and below), aboveground conduit plans and details, grounding plan and
details, UPS distribution panel schedules using AutoCad 2004 CAD system.
March 2000 - Under contract to MEI Consultants, Inc Houston, Texas
March 2002 Sr. Design Leader : Electrical cable tray distribution system (4160v and below),
4160v switchgear, 480v motor control centers, PLC control cabinet, PLC chassis
layout and wiring diagrams, I/O schematic and wiring diagrams, schematics,
wiring and interconnection diagrams using AutoCad Release 14 for compressor
stations at Plantation Pipeline Company. This required visits to electrical
building vendor, NS Controls, for assistance in wiring of electrical buildings
before shipment to the sites.
Instrument/Electrical Inspector : Field inspector for Teppco at North Houston
Delivery, Terminal, IAH Interface Detector and Junction sites at IAH Airport. This
also included as-built drawings.
Instrument/Electrical Inspector : Field inspector for Teppco at Monee LPG Truck
Loading Facility in Monee, Illinois. This included daily construction reports,
Hazardous-Operation document review, plant check-out, start-up and as-built
drawings.
Sr. Design Leader : Electrical underground distribution system (480v and
below), 480v motor control center, PLC control cabinet, PLC chassis layout

RUBEN GENARO FLORES
and wiring diagram, I/O schematic and wiring diagrams, schematics, wiring and
interconnection diagrams using AutoCad 2000 for compressor station at CMS
Energy.
Nov. 1998 - TI Energy Services, Inc. Houston, Texas
March 2000 Lead Instrument/Electrical Designer : Electrical cable tray distribution system
(2400v and below), 2400v switchgear, 480v motor control centers, variable
frequency drives, PLC control cabinets, PLC chassis layout and wiring diagrams,
I/O address and wiring diagrams, lighting and power panels, grounding, one line
diagrams, schematics, wiring and interconnection diagrams, fire and gas
detection systems, hazardous area design, junction box wiring diagrams, and
material take-off using AutoCAD Release 14 and Microstation Version SE CAD
systems for compressor and meter stations at Exxon Pipeline Company,
Columbia Gulf Transmission Company and El Paso Energy Company. This work
required field trips to verify and as-built drawings. Introductory training on
WonderWare human machine interface graphics program.
May 1998 - Jacobs Engineering Group Houston, Texas
Nov. 1998 Senior Electrical Designer : Electrical cable tray distribution system (480v and
below), 4.16kv switchgear, 480v motor control centers, dc drives,
lighting and power panels, lighting, grounding, ups systems, one line diagrams,
schematics, wiring and interconnection diagrams, hazardous area design,
control panel layout, instrument location plans, I/O schematics, loop diagrams
and material take-off using AutoCAD Release 13 CAD system for new Extruder
Line BA and BD at GE Plastics.
Nov. 1997 - Under contract to Brown and Root @ NASA-JSC Clear Lake City, Texas
April 1998 Senior Electrical Designer : Electrical cable tray distribution (480v and below),
one line diagrams, cable riser diagrams, power plans and details at Mission
Control Center. Redistribution of 480v power feeders for continuous
operations of BLDG 30S for Space Station and Space Shuttles Operations
using Micro-
Station 5.1 CAD System.
Sept. 1997 - Under contract to Engineering Mechanics Inc. Houston, Texas
Nov. 1997 Lead Instrument/Electrical Designer : Electrical cable tray distribution (480v and
below) on derrick of drillship using AutoCAD Release 13. Cable schedule using
Microsoft Excel 97 in Windows NT operating environment.
Sept. 1996 - Under contract to Dow Chemical Co. Houston, Texas
Sept. 1997 Senior Electrical Designer : Electrical cable tray distribution systems (4.16kv and
below), 4.16kv switchgears, 480v motor control centers, variable frequency
drives, lighting and power panels, lighting, grounding using PasCE 3D
CAD System. Pole line cable routing (4.16kv and 14.4 kv), one line diagrams,
panel schedules and heat tracing systems using MicroStation 95 CAD System.
Scope of work, labor and material Specifications, cable schedules, equipment
list and grounding schedules using Project DataBase System. Cost estimates,
equipment and grounding schedules using Microsoft Excel 95 in
Windows NT operating environment. Field visits to survey existing electrical
equipment.
July 1995 - ABB Lummus Crest Inc. Houston, Texas
Sept. 1996 Senior Electrical Designer : Electrical cable tray distribution system (4.16kv and
below), lighting and power panels, lighting and cable tray supports using
PasCE 3D CAD System. This included one line diagrams using
Instrument/Electrical Database Program (IEDP), automated material take-off
using Material Take-off Control System (MTCS).using AutoCAD Release 12

RUBEN GENARO FLORES
CAD system for grassroots ethylene plant. Underground distributon system
(4.16kv and below), lighting and power panels, hazardous area design
and material take-off using AutoCAD Release 12 CAD system for NGL
compressor station in Saudi Arabia.
NOTE : Previous experience and references available upon request.
COMPUTER-AIDED DRAFTING (CAD 2D/3D) TRAINING
PasCE 3D Training (Plant Applications and Systems from Combustion Engineering) 1989
PasCE 3D Training (Plant Applications and Systems Concurrent Engineering) 1995
Microstation 2D Version 4.0 Training 1993
AutoCAD 2.5 Introductory Training 1986
AutoCAD Release 9 Advanced Training 1987
AutoCAD AutoLISP Programming 1991
SmartPlant 3D Training 2013
SmartPlant 3D Admin Training 2013
SmartPlant Instrumentation Training 2013
SmartPlant Instrument Admin Training 2013
SmartPlant Electrical Training 2014
SmartPlant Electrical Admin Training 2014
SOFTWARE PROFICIENCY
Microsoft Office Suite
AutoCAD
SmartPlant 3D
SmartPlant Instrumentation (SPI)
CLEARENCES
TWIC – Transportation Worker Identification Creditials
ASSOCIATIONS
Phi Theta Kappa
Instrument Society of America
EDUCATION
Pasadena High School 1977 Diploma Brown and Root Design Drafting - 1977
San Jacinto College 1980 Bechtel Power Division -
University of Texas Austin 1980 - 1981 Electrical Discipline Training Program 1979
Houston Community College 1997 - 2002 Bechtel Designer Training Program 1981

Resume37

Recommended

Recommended

More Related Content

What's hot

What's hot (19)

Similar to Resume37

Similar to Resume37 (20)

Resume37