1. Ross Ewing

2.  Currently, that is Aileen
 You’ll need ask for 2 things:
 Your IP address
 The password for the WiFi network

3.  Your IP address is essentially your address on
the network
 Just like you need a mailing address to get your
mail, the IP address lets websites know where
to find you
 Your IP address will look like this
 192.168.1.XX
 XX will be the only variable. Each person will have a
different number here.

4.  Next, lets get connected to the internet

5.  First step, make sure the switch on the outside
of the computer is on the right side. This is
your WiFi switch. It will activate/deactivate
your WiFI.
 Useful if you need to save power while using
the SMARTboard

6.  Make sure this
switch is on the
right side

7.  Once it’s on, look at the right bottom part of
your screen:
 Look for this
icon:

8.  Right click here and choose open network
connections

10.  This window will
open. Double
click on Internet
Protocol
(TCP/IP)

12.  Fill in the fields
so your it looks
like this
picture.
 NOTE: The last
digits of “IP
address”
should be the
ones the tech
administrator
assigned to you

13.  Click OK on
this window,
and the next

14.  Right click on this icon and choose View
Available Wireless Networks

16.  If you are on the first floor, choose NSWEMIO1
 If you are on the second floor, choose
NSWEMIO2, etc

20.  Now, set your
laptop on the
table in the
classroom.
Find these two
wires

26.  Finally,
press Fn+F3
together,
twice

27.  The following should be accomplished by now
 Laptop is connected to the internet
 The SMARTboard is on
 The projector is active
 Your computer is displaying your desktop