Rohit mohite resume 1
•
0 likes•19 views
Rohit Mohite is seeking a position as a mechatronics or automation engineer. He has experience as an intern automation engineer designing pneumatic systems and programming PLCs and HMIs. He has a M.Tech in Mechatronics and B.E. in Mechanical Engineering. His projects include designing a laser marking machine for MCB switches and developing speed control systems for vehicles using RF technology.
Report
Share
Report
Share
Download to read offline
Recommended
Rohit mohite resume
Rohit Mohite seeks a position as a mechatronics or automation engineer. He has a M.Tech in Mechatronics and BE in Mechanical Engineering. His experience includes an internship as an Automation Engineer where he gained practical design and PLC programming skills. His academic qualifications include a 70% average in Diploma and 78% in SSC. Current projects include designing a laser marking machine and past projects involve vehicle speed control using RF, kite power generation simulation, and a hydraulic system design.
Shaunak a chandwadkar Resume
Shaunak Chandwadkar is seeking a full-time job where he can learn new technologies and use his interdisciplinary knowledge to bring innovation. He has a Master's degree in Mechanical Engineering from IUPUI and a Bachelor's from Savitribai Phule Pune University. His skills include design software like Solidworks and Creo, programming microcontrollers, and research experience. He has worked as a research assistant testing cartilage strength and operated machines like mills and lathes. Some of his projects include designing an injection molding die, implementing Kanban systems, and designing hybrid electric vehicle and adaptive cruise control systems.
RESUME Pharande Photo
Rahul Dilip Pharande has submitted his curriculum vitae. He has an M.Tech in Automobile Engineering from Rajarambapu Institute of Technology and a B.E. in Automobile Engineering from the same institution. His areas of interest include IC engines, automobile transmission and chassis, and automobile maintenance. For his M.Tech project, he worked on reducing the weight and increasing the cooling effect of disc brakes. He has over 1.5 years of work experience as an assistant professor and 14 months as an automobile mechanic. Rahul has published research on the thermo-mechanical behavior of brake discs and has participated in various workshops and a training on technical pedagogy.
Resume
Ishaan Saxena is a final year undergraduate mechanical engineering student seeking opportunities in research and development and technical fields. He has gained extensive knowledge in areas like production engineering, new product development, and quality management through his studies. He has practical experience from internships in fields like pharmaceutical engineering and automotive engineering. He has strong skills in CAD tools like SolidWorks and AutoCAD as well as engineering skills like finite element analysis. He has undertaken personal projects in areas like additive manufacturing, robotics, and composites manufacturing.
Satyendra Swami
Satyendra Swami is seeking a career opportunity where he can apply his knowledge and skills as a recent mechanical engineering graduate. He has a Bachelor of Engineering degree from Venus International College of Technology with percentages ranging from 5.9-8.55 across 8 semesters. His internship and projects include work on compressed air vehicles, refrigeration systems, and solar electric vehicles. He has experience with AutoCAD, networking, Microsoft Office, and has participated in workshops, seminars, and industrial visits covering various mechanical engineering topics. His areas of interest include power plants, heat transfer, pumps/turbines, and automobiles.
RESUME
I seek for full time opportunities in the field of mechanical engineering . I specialize in controls engineering and experienced in the field of product quality and after sales engineer.
Ahmed Mohamed Ismail,_CV,
This document is a resume for Ahmed Mohamed Ismail Shafey, an Egyptian mechanical engineer seeking a new job opportunity. It outlines his education including a bachelor's degree in mechanical power engineering from Cairo University, projects including designing an eco-friendly car prototype, work experience as a technical and planning engineer at Suzuki Egypt, and skills in areas such as computer programming, modeling, and leadership.
Resume
Kompella Sai Satvik has a B.E. in Mechanical Engineering from Vasavi College of Engineering in Hyderabad, India. He has skills in CAD software like CATIA and NX8 as well as machining, fabrication, Microsoft Office, and programming languages like C, C++, and Basic. Some of his projects include designing a non-electric adsorption refrigerator and performing thermal analysis on engine components. He currently works for FMC Technologies and has internship experience at BHEL labs working on compressor design.
Recommended
Rohit mohite resume
Rohit Mohite seeks a position as a mechatronics or automation engineer. He has a M.Tech in Mechatronics and BE in Mechanical Engineering. His experience includes an internship as an Automation Engineer where he gained practical design and PLC programming skills. His academic qualifications include a 70% average in Diploma and 78% in SSC. Current projects include designing a laser marking machine and past projects involve vehicle speed control using RF, kite power generation simulation, and a hydraulic system design.
Shaunak a chandwadkar Resume
Shaunak Chandwadkar is seeking a full-time job where he can learn new technologies and use his interdisciplinary knowledge to bring innovation. He has a Master's degree in Mechanical Engineering from IUPUI and a Bachelor's from Savitribai Phule Pune University. His skills include design software like Solidworks and Creo, programming microcontrollers, and research experience. He has worked as a research assistant testing cartilage strength and operated machines like mills and lathes. Some of his projects include designing an injection molding die, implementing Kanban systems, and designing hybrid electric vehicle and adaptive cruise control systems.
RESUME Pharande Photo
Rahul Dilip Pharande has submitted his curriculum vitae. He has an M.Tech in Automobile Engineering from Rajarambapu Institute of Technology and a B.E. in Automobile Engineering from the same institution. His areas of interest include IC engines, automobile transmission and chassis, and automobile maintenance. For his M.Tech project, he worked on reducing the weight and increasing the cooling effect of disc brakes. He has over 1.5 years of work experience as an assistant professor and 14 months as an automobile mechanic. Rahul has published research on the thermo-mechanical behavior of brake discs and has participated in various workshops and a training on technical pedagogy.
Resume
Ishaan Saxena is a final year undergraduate mechanical engineering student seeking opportunities in research and development and technical fields. He has gained extensive knowledge in areas like production engineering, new product development, and quality management through his studies. He has practical experience from internships in fields like pharmaceutical engineering and automotive engineering. He has strong skills in CAD tools like SolidWorks and AutoCAD as well as engineering skills like finite element analysis. He has undertaken personal projects in areas like additive manufacturing, robotics, and composites manufacturing.
Satyendra Swami
Satyendra Swami is seeking a career opportunity where he can apply his knowledge and skills as a recent mechanical engineering graduate. He has a Bachelor of Engineering degree from Venus International College of Technology with percentages ranging from 5.9-8.55 across 8 semesters. His internship and projects include work on compressed air vehicles, refrigeration systems, and solar electric vehicles. He has experience with AutoCAD, networking, Microsoft Office, and has participated in workshops, seminars, and industrial visits covering various mechanical engineering topics. His areas of interest include power plants, heat transfer, pumps/turbines, and automobiles.
RESUME
I seek for full time opportunities in the field of mechanical engineering . I specialize in controls engineering and experienced in the field of product quality and after sales engineer.
Ahmed Mohamed Ismail,_CV,
This document is a resume for Ahmed Mohamed Ismail Shafey, an Egyptian mechanical engineer seeking a new job opportunity. It outlines his education including a bachelor's degree in mechanical power engineering from Cairo University, projects including designing an eco-friendly car prototype, work experience as a technical and planning engineer at Suzuki Egypt, and skills in areas such as computer programming, modeling, and leadership.
Resume
Kompella Sai Satvik has a B.E. in Mechanical Engineering from Vasavi College of Engineering in Hyderabad, India. He has skills in CAD software like CATIA and NX8 as well as machining, fabrication, Microsoft Office, and programming languages like C, C++, and Basic. Some of his projects include designing a non-electric adsorption refrigerator and performing thermal analysis on engine components. He currently works for FMC Technologies and has internship experience at BHEL labs working on compressor design.
Presentation carpooling1
The document describes an Android mobile app for carpooling developed for TVS employees. It includes login functionality for employee authentication, use of Google Maps API for route maps, and implementation of various app pages like ride booking, trip navigation, my rides history, and feedback. The app allows filtering cars by location using geofencing and checks that selected cars have enough seats. Future work could expand the system to more regions and implement real-time traffic in the navigation.
Talha shuja cv (1)
Talha Shuja is seeking a summer internship in mechanical engineering from June to September 2019. He is currently a second year mechanical engineering student at Rochester Institute of Technology in Dubai with a GPA of 3.81. His relevant coursework includes thermodynamics, statics, dynamics, materials science, fluid mechanics and strength of materials. He received second place in an engineering design project to design an automated scissor lift using CAD software and produced a prototype. He has also conducted materials testing labs including tensile tests and machining work pieces.
Resume
Satheeshkumar P is seeking an opportunity that allows him to work in a challenging environment and utilize his skills to contribute to organizational development. He has a B.E. in Mechanical Engineering from Selvam College of Technology with 70% marks and a diploma in Mechanical Engineering from Konghu Velalar Polytechnic with 85.2% marks. His areas of technical interest include automobile and manufacturing technologies and he is proficient in CAD software like AutoCAD, PRO-E, and SolidWorks as well as simulation software like ANSYS. He has completed industrial internships at ISRO and an automotive service center and mini/major engineering projects involving turbochargers and tribological studies of aluminum alloys.
NEW ARUNENDRA'S CV 2016 for Industry
This document is a curriculum vitae for Arunendra Singh Chauhan. It includes his contact information, career objective, key skills, work experience as an Assistant Professor, a journal publication, professional qualifications including a Master of Technology degree and Bachelor of Technology degree, an industrial training, B.Tech and M.Tech projects, technical skills, interests and hobbies, extracurricular achievements, other achievements including certifications and workshops attended, and personal details.
chaitaliingle
Chaitali Rajendra Ingle is seeking a position where she can apply her skills to achieve business objectives and excellence. She has a Bachelor's degree in Information Technology Engineering from KIT's College of Engineering with 60.14% marks. She has technical skills in languages like C, C++, Java and databases like SQL. She has certifications in Java from Seed Infotech. Her academic projects include K-Means clustering using MapReduce for medical searching and an FTP file transfer software. She has won prizes for her work in C programming and idea presentation competitions. Her personal details and contact information are also included.
Aditya's-RESUME-1
Aditya Achar is a Mechatronics Engineering graduate seeking a position in control systems and software modeling. He has experience developing control systems for mechanical grippers and cranes using LabVIEW and PID controllers. He also has experience modeling robotic arms and cranes in Matlab/Simulink. His technical skills include programming languages like Matlab/Simulink, C, and LabVIEW as well as engineering design tools like Solidworks. He has a Bachelor's degree in Mechanical Engineering from Ryerson University and has worked on projects involving mechanical grippers, railway bogies, and mobile robots.
Mitesh goplani
Mitesh Goplani is a software engineer with experience in machine learning, blockchain development, cloud services, and system design. He has a Bachelor's degree in engineering from Vivekanand Education Society's Institute of Technology. His skills include Python, C/C++, Java, React Native, JavaScript frameworks, Hadoop, PySpark, image processing, and deep learning. He has worked on projects involving object detection, blockchain-based subsidy systems, malware prediction, and IOT temperature monitoring. His internships included roles in data analysis, infrastructure development, embedded systems, and content management systems.
Surendra Resume_2016
This document provides a summary of Surendra Chandawarkar's work experience and qualifications. It summarizes his 9 years of experience in developing mathematical models in MATLAB/Simulink for automotive and aerospace applications, including modeling lithium-ion battery systems, hybrid vehicle systems, and avionics systems. His most recent role was as a Senior Design Engineer at MagnaSteyr, where he developed models for crack growth analysis and vehicle subsystem modeling. Previously he worked at Eaton Corporation modeling hybrid vehicle performance and developing hardware-in-loop simulations, and at Aeronautical Development Agency analyzing aircraft data and developing subsystem models. He has a Bachelor's degree in Electronics and Communication.
CV
Aspiring to be a Mechatronics Engineer specialising in Automation and Control as well as analytics related to the same.
Ganesh Kamath's Résumé (3)
Ganesh Kamath is a software development engineer specializing in platform power management tools. He has over 5 years of experience developing tools like Intel XTU for overclocking and performance tuning. Previously he developed ACPI evaluation and system profiling tools at Intel to identify power consumption. He holds an MS in Embedded and Wireless Technology from Manipal University and a B.Tech from Amrita University. His skills include platform power management, coding in Python, C++, C and Java. He has received several achievements and certificates including being named a top 50 community volunteer at Intel India.
1_pg_resume
This mechanical engineer is seeking a challenging position in design engineering where he can contribute to an organization's success. He has a Bachelor's degree in Mechanical Engineering with over 68% marks. His technical skills include CAD software like AutoCAD, CREO and SOLIDWORKS as well as simulation software ANSYS. He has practical experience overhauling automobiles and completed industrial training at thermal and tractor plants. For his final year project, he designed an e-bike for rural transportation. He regularly attends seminars and workshops on various engineering topics and is an active member of professional societies.
Bhuvan's cv 11/18
Bhuvana Tej Kanigiri is an undergraduate student from Chaitanya Bharathi Institute of Technology studying electrical engineering with a GPA of 6.98/10. His research interests include mobile robotics, autonomous drones, reinforcement learning, and autonomous vehicles. He has research experience implementing an autonomous quadcopter for indoor pick up and drop off using Pixhawk and ROS. Additionally, he has worked on image recognition using ZED stereo camera and visual SLAM localization. Bhuvana has published papers on wind turbine robotic control and home automation using IoT. He is currently working on projects involving an autonomous human carrying hexacopter and deep reinforcement learning on a P3DX robot.
Shahrukh Siddiqui Certificate
Shahrukh Siddiqui secured an Android App Development internship at Parkly through Internshala. He studied at ITS Engineering College in Greater Noida. The date of his certification for this internship was September 13, 2015.
shashank raj resume
Shashank Raj is seeking a challenging position where he can utilize his skills. He has over 2 years of work experience in quality engineering and production roles. He has experience with AutoCAD, CATIA, and Microsoft Office applications. Shashank holds a B.Tech in Mechanical Engineering with over 73% and has experience with academic projects involving automated guided vehicles. He is proficient in English, Hindi, and Punjabi and possesses strong communication and learning skills.
Surendra Resume_2016
This document provides a summary of Surendra Chandawarkar's background and qualifications. It summarizes his experience as a senior design engineer developing mathematical models in MATLAB/Simulink for over 9 years in the automotive and aerospace industries. Some of his responsibilities included developing models for lithium-ion battery systems, hybrid vehicles, hardware-in-loop simulations, and aircraft subsystems. He has a Bachelor's degree in Electronics and Communication and is proficient in MATLAB, Simulink, Stateflow, and other modeling software tools.
Ritangshu_CV
Ritangshu Giri is seeking a position applying his knowledge and skills in fluid mechanics, both experimentally and computationally. He has a Master of Science in Aerospace Engineering from the University of Cincinnati and a Bachelor of Technology in Mechanical Engineering from the National Institute of Technology, Silchar, India. His thesis involved modeling and simulating non-reacting flows in a swirl stabilized lean pressure atomizer. He has work experience with Hindustan Petroleum Corporation and as a research assistant at the University of Cincinnati's Gas Dynamics and Propulsion Laboratory.
High speed object counting conveyor
The document describes a high speed object counting conveyor system. The system uses an infrared sensor to count objects passing on a conveyor belt powered by a DC motor. A microcontroller controls the infrared sensor to count objects and relay driver to power the DC motor. The count is displayed on an LCD screen. The system is designed to accurately count objects moving at high speeds on the conveyor belt.
Resume Nelson
James Nelson is seeking a position as a mechanical design engineer in the aerospace industry. He has a Bachelor of Science in Mechanical Engineering from Arizona State University with a 4.0 GPA. His experience includes designing mechanical components and subassemblies as an automation engineer and leading the mechanical group for his university's robotics club. He has skills in CAD, engineering drawings, modeling, and optimization. His projects include designing an electrostatic testing device, optimizing gear ratios in automotive powertrains, modeling turbine heat exchangers, and designing and testing model rockets.
Abhishek Ghosh updated
Abhishek Ghosh is seeking a position as a Mechanical Engineer to utilize his skills and experience. He has an ME in Mechanical Engineering from Indian Institute of Engineering Science and Technology, Shibpur with a CGPA of 8.47. He has industrial training experience at Tractors India Limited, CESC Southern Generating Station, and GRSE. His projects include designing an efficient yard layout and a thesis on linear dynamic analysis of finite hydrodynamic journal bearing. He is proficient in Pro-Engineer, Matlab, Autolisp, and MS-Excel and has qualified GATE in 2012.
Automation
This document outlines an industrial automation workshop for engineering students. The workshop will provide both theoretical and hands-on experience with automation technologies including machine vision, programmable logic controllers, motion control, and integrating these systems. Students will learn skills like PLC programming, servo motor control, machine vision, and industrial robot programming. They will complete projects applying these concepts individually or in teams. The workshop aims to prepare students for careers involving automation of industrial processes and production lines which are in high demand.
Automation
This document outlines an industrial automation workshop for engineering students. The workshop will provide both theoretical and hands-on experience with automation technologies including machine vision, programmable logic controllers, motion control, and integrating these systems. Students will learn skills like PLC programming, servo motor control, machine vision, and industrial robot programming. They will complete hands-on labs and have the opportunity to develop an independent student project applying concepts from the workshop.
Rajkiran patil
Rajkiran Patil is pursuing a Master of Technology in Control and Automation from Vellore Institute of Technology. He has a Bachelor of Engineering in Instrumentation Engineering from D.N. Patel College of Engineering, Shahada. His past work experience includes a 3 month traineeship at Loknayak Jayprakash Narayan Sahakari Cotton Industry Pvt. Ltd where he learned about automation processes in ring spinning. His areas of interest include industrial automation, robotics, machine learning, and IoT.
More Related Content
What's hot
Presentation carpooling1
The document describes an Android mobile app for carpooling developed for TVS employees. It includes login functionality for employee authentication, use of Google Maps API for route maps, and implementation of various app pages like ride booking, trip navigation, my rides history, and feedback. The app allows filtering cars by location using geofencing and checks that selected cars have enough seats. Future work could expand the system to more regions and implement real-time traffic in the navigation.
Talha shuja cv (1)
Talha Shuja is seeking a summer internship in mechanical engineering from June to September 2019. He is currently a second year mechanical engineering student at Rochester Institute of Technology in Dubai with a GPA of 3.81. His relevant coursework includes thermodynamics, statics, dynamics, materials science, fluid mechanics and strength of materials. He received second place in an engineering design project to design an automated scissor lift using CAD software and produced a prototype. He has also conducted materials testing labs including tensile tests and machining work pieces.
Resume
Satheeshkumar P is seeking an opportunity that allows him to work in a challenging environment and utilize his skills to contribute to organizational development. He has a B.E. in Mechanical Engineering from Selvam College of Technology with 70% marks and a diploma in Mechanical Engineering from Konghu Velalar Polytechnic with 85.2% marks. His areas of technical interest include automobile and manufacturing technologies and he is proficient in CAD software like AutoCAD, PRO-E, and SolidWorks as well as simulation software like ANSYS. He has completed industrial internships at ISRO and an automotive service center and mini/major engineering projects involving turbochargers and tribological studies of aluminum alloys.
NEW ARUNENDRA'S CV 2016 for Industry
This document is a curriculum vitae for Arunendra Singh Chauhan. It includes his contact information, career objective, key skills, work experience as an Assistant Professor, a journal publication, professional qualifications including a Master of Technology degree and Bachelor of Technology degree, an industrial training, B.Tech and M.Tech projects, technical skills, interests and hobbies, extracurricular achievements, other achievements including certifications and workshops attended, and personal details.
chaitaliingle
Chaitali Rajendra Ingle is seeking a position where she can apply her skills to achieve business objectives and excellence. She has a Bachelor's degree in Information Technology Engineering from KIT's College of Engineering with 60.14% marks. She has technical skills in languages like C, C++, Java and databases like SQL. She has certifications in Java from Seed Infotech. Her academic projects include K-Means clustering using MapReduce for medical searching and an FTP file transfer software. She has won prizes for her work in C programming and idea presentation competitions. Her personal details and contact information are also included.
Aditya's-RESUME-1
Aditya Achar is a Mechatronics Engineering graduate seeking a position in control systems and software modeling. He has experience developing control systems for mechanical grippers and cranes using LabVIEW and PID controllers. He also has experience modeling robotic arms and cranes in Matlab/Simulink. His technical skills include programming languages like Matlab/Simulink, C, and LabVIEW as well as engineering design tools like Solidworks. He has a Bachelor's degree in Mechanical Engineering from Ryerson University and has worked on projects involving mechanical grippers, railway bogies, and mobile robots.
Mitesh goplani
Mitesh Goplani is a software engineer with experience in machine learning, blockchain development, cloud services, and system design. He has a Bachelor's degree in engineering from Vivekanand Education Society's Institute of Technology. His skills include Python, C/C++, Java, React Native, JavaScript frameworks, Hadoop, PySpark, image processing, and deep learning. He has worked on projects involving object detection, blockchain-based subsidy systems, malware prediction, and IOT temperature monitoring. His internships included roles in data analysis, infrastructure development, embedded systems, and content management systems.
Surendra Resume_2016
This document provides a summary of Surendra Chandawarkar's work experience and qualifications. It summarizes his 9 years of experience in developing mathematical models in MATLAB/Simulink for automotive and aerospace applications, including modeling lithium-ion battery systems, hybrid vehicle systems, and avionics systems. His most recent role was as a Senior Design Engineer at MagnaSteyr, where he developed models for crack growth analysis and vehicle subsystem modeling. Previously he worked at Eaton Corporation modeling hybrid vehicle performance and developing hardware-in-loop simulations, and at Aeronautical Development Agency analyzing aircraft data and developing subsystem models. He has a Bachelor's degree in Electronics and Communication.
CV
Aspiring to be a Mechatronics Engineer specialising in Automation and Control as well as analytics related to the same.
Ganesh Kamath's Résumé (3)
Ganesh Kamath is a software development engineer specializing in platform power management tools. He has over 5 years of experience developing tools like Intel XTU for overclocking and performance tuning. Previously he developed ACPI evaluation and system profiling tools at Intel to identify power consumption. He holds an MS in Embedded and Wireless Technology from Manipal University and a B.Tech from Amrita University. His skills include platform power management, coding in Python, C++, C and Java. He has received several achievements and certificates including being named a top 50 community volunteer at Intel India.
1_pg_resume
This mechanical engineer is seeking a challenging position in design engineering where he can contribute to an organization's success. He has a Bachelor's degree in Mechanical Engineering with over 68% marks. His technical skills include CAD software like AutoCAD, CREO and SOLIDWORKS as well as simulation software ANSYS. He has practical experience overhauling automobiles and completed industrial training at thermal and tractor plants. For his final year project, he designed an e-bike for rural transportation. He regularly attends seminars and workshops on various engineering topics and is an active member of professional societies.
Bhuvan's cv 11/18
Bhuvana Tej Kanigiri is an undergraduate student from Chaitanya Bharathi Institute of Technology studying electrical engineering with a GPA of 6.98/10. His research interests include mobile robotics, autonomous drones, reinforcement learning, and autonomous vehicles. He has research experience implementing an autonomous quadcopter for indoor pick up and drop off using Pixhawk and ROS. Additionally, he has worked on image recognition using ZED stereo camera and visual SLAM localization. Bhuvana has published papers on wind turbine robotic control and home automation using IoT. He is currently working on projects involving an autonomous human carrying hexacopter and deep reinforcement learning on a P3DX robot.
Shahrukh Siddiqui Certificate
Shahrukh Siddiqui secured an Android App Development internship at Parkly through Internshala. He studied at ITS Engineering College in Greater Noida. The date of his certification for this internship was September 13, 2015.
shashank raj resume
Shashank Raj is seeking a challenging position where he can utilize his skills. He has over 2 years of work experience in quality engineering and production roles. He has experience with AutoCAD, CATIA, and Microsoft Office applications. Shashank holds a B.Tech in Mechanical Engineering with over 73% and has experience with academic projects involving automated guided vehicles. He is proficient in English, Hindi, and Punjabi and possesses strong communication and learning skills.
Surendra Resume_2016
This document provides a summary of Surendra Chandawarkar's background and qualifications. It summarizes his experience as a senior design engineer developing mathematical models in MATLAB/Simulink for over 9 years in the automotive and aerospace industries. Some of his responsibilities included developing models for lithium-ion battery systems, hybrid vehicles, hardware-in-loop simulations, and aircraft subsystems. He has a Bachelor's degree in Electronics and Communication and is proficient in MATLAB, Simulink, Stateflow, and other modeling software tools.
Ritangshu_CV
Ritangshu Giri is seeking a position applying his knowledge and skills in fluid mechanics, both experimentally and computationally. He has a Master of Science in Aerospace Engineering from the University of Cincinnati and a Bachelor of Technology in Mechanical Engineering from the National Institute of Technology, Silchar, India. His thesis involved modeling and simulating non-reacting flows in a swirl stabilized lean pressure atomizer. He has work experience with Hindustan Petroleum Corporation and as a research assistant at the University of Cincinnati's Gas Dynamics and Propulsion Laboratory.
High speed object counting conveyor
The document describes a high speed object counting conveyor system. The system uses an infrared sensor to count objects passing on a conveyor belt powered by a DC motor. A microcontroller controls the infrared sensor to count objects and relay driver to power the DC motor. The count is displayed on an LCD screen. The system is designed to accurately count objects moving at high speeds on the conveyor belt.
Resume Nelson
James Nelson is seeking a position as a mechanical design engineer in the aerospace industry. He has a Bachelor of Science in Mechanical Engineering from Arizona State University with a 4.0 GPA. His experience includes designing mechanical components and subassemblies as an automation engineer and leading the mechanical group for his university's robotics club. He has skills in CAD, engineering drawings, modeling, and optimization. His projects include designing an electrostatic testing device, optimizing gear ratios in automotive powertrains, modeling turbine heat exchangers, and designing and testing model rockets.
Abhishek Ghosh updated
Abhishek Ghosh is seeking a position as a Mechanical Engineer to utilize his skills and experience. He has an ME in Mechanical Engineering from Indian Institute of Engineering Science and Technology, Shibpur with a CGPA of 8.47. He has industrial training experience at Tractors India Limited, CESC Southern Generating Station, and GRSE. His projects include designing an efficient yard layout and a thesis on linear dynamic analysis of finite hydrodynamic journal bearing. He is proficient in Pro-Engineer, Matlab, Autolisp, and MS-Excel and has qualified GATE in 2012.
What's hot (19)
Similar to Rohit mohite resume 1
Automation
This document outlines an industrial automation workshop for engineering students. The workshop will provide both theoretical and hands-on experience with automation technologies including machine vision, programmable logic controllers, motion control, and integrating these systems. Students will learn skills like PLC programming, servo motor control, machine vision, and industrial robot programming. They will complete projects applying these concepts individually or in teams. The workshop aims to prepare students for careers involving automation of industrial processes and production lines which are in high demand.
Automation
This document outlines an industrial automation workshop for engineering students. The workshop will provide both theoretical and hands-on experience with automation technologies including machine vision, programmable logic controllers, motion control, and integrating these systems. Students will learn skills like PLC programming, servo motor control, machine vision, and industrial robot programming. They will complete hands-on labs and have the opportunity to develop an independent student project applying concepts from the workshop.
Rajkiran patil
Rajkiran Patil is pursuing a Master of Technology in Control and Automation from Vellore Institute of Technology. He has a Bachelor of Engineering in Instrumentation Engineering from D.N. Patel College of Engineering, Shahada. His past work experience includes a 3 month traineeship at Loknayak Jayprakash Narayan Sahakari Cotton Industry Pvt. Ltd where he learned about automation processes in ring spinning. His areas of interest include industrial automation, robotics, machine learning, and IoT.
Munmi testing cv
Munmi Talukdar is seeking a position that allows her to contribute to an organization's growth using her analytical and technical skills. She has 6 months of experience in Java, JSP, Selenium, and automation frameworks. She is currently working at Pixelette Technologies in Bangalore developing applications. Her skills include Java, JSP, HTML, CSS, MySQL, and Linux. She has a Master's in Technology and a Bachelor's in Technology. Her projects include developing educational and charity websites using technologies like Java, JSP, and MySQL.
Munmi testing cv
Munmi Talukdar is seeking a position that allows her to contribute to an organization's growth using her analytical and technical skills. She has 6 months of experience in Java, JSP, Selenium, and automation frameworks. She is currently working at Pixelette Technologies in Bangalore developing applications. Her skills include Java, JSP, HTML, CSS, MySQL, and Linux. She has a Master's in Technology and a Bachelor's in Technology. Her projects include developing educational and charity websites using technologies like Java, JSP, and MySQL.
Prototyping of the Virtual Type
Digital simulation tools enable designers to virtually prototype industrial controls engineering, by Don Talend, brand storytelling, content management, and content strategy expert. Industrial controls industry
shiva_resume
Shiva Teja Reddy Muskula has over 3 years of experience as an Automation Test Engineer, Quality Analyst, and Web Developer. He has a Master's degree in Computer Science from the University of Toledo and a Bachelor's degree in Technology from Kakatiya University. His technical skills include databases, testing tools, programming languages, and web technologies. He has worked as a Student Assistant at the University of Toledo and as a Member Technical at ADP Private Limited. Some of his projects include a speaking calculator, comparison of optimization methods, an HR management system, and generating electricity from speed breakers. He has received several honors for his work.
sundar resume
Sundar S is a mechanical engineering student seeking a career where he can contribute his knowledge and skills. He has experience in product design and development using CAD software like Creo and AutoCAD. His academic qualifications include a B.E. in Mechanical Engineering from Loyola-ICAM College of Engineering and Technology. For his main projects, he designed and fabricated an automated biodiesel reactor and a paddy separator. He is proficient in Solidworks, Creo, and AutoCAD and has undergone training in manufacturing processes.
Vivek Resume
Vivek V. Kapte is a software developer seeking a position that allows him to explore his skills in ASP.NET programming. He has over 2.5 years of experience developing software using ASP.NET and SQL Server. He is competent in all phases of the software development lifecycle and has strong communication and problem-solving skills.
Arif_resume
- The document is a resume for R. Arif Mohamed Khan from India who is currently working as an Assistant Professor and Project Associate focused on machine vision development.
- He has a Master's degree in Mechatronics and Bachelor's degree in Computer Science Engineering.
- His expertise includes image processing techniques, machine vision systems, automation integration, and algorithm development. He is proficient in programming languages and tools like C, C++, Python, MATLAB, and LabVIEW.
- He has experience leading projects in visual cryptography, ratio control systems, web inspection, and an autonomous chess playing robot. His current role involves conducting feasibility studies and overseeing the integration and testing of machine vision projects.
POM opening by sir Shahid Khalil of .ppt
The document outlines the educational background and professional experience of an individual teaching a course on Production Operation Management. It provides details on the instructor's PhD from the University of Sheffield, other degrees, quality management certifications, and experience working in management roles and consulting positions. It also lists the course objectives, topics, evaluation methods including assignments, quizzes, projects and presentations.
Resume Embedded
P. Prasath is seeking a position as a Design and Test engineer. He has a Master's degree in Electronics and Instrumentation from Bharathiar University and 3 years of experience in testing and automation using technologies like LabVIEW, embedded C, and PLCs & SCADAs. Some of his projects include developing an automated fitness machine controller using a PIC microcontroller, creating a GSM-based water pump controller, and designing a non-invasive salivary glucose estimation prototype. He is proficient in requirements analysis, software design, debugging, and communication protocols.
Resume
P. Prasath is seeking a position as a Design and Test engineer with experience in testing and automation domains including embedded systems and LabVIEW. He has a Master's degree in Electronics and Instrumentation and Bachelor's degrees in Electronics and Computer Science. His experience includes working as a Project Engineer at Falcon Square Pvt. Ltd from 2013-2016 where he developed applications and automated test equipment using technologies like LabVIEW, embedded C, and DAQ systems. He has also completed projects involving IoT, medical devices, and home automation systems.
Managers guide to effective building of machine learning products
Part 1/2 (Managers)
Data and Machine Learning (ML) technologies are now widespread and adopted by literally all industries. Although recent advancements in the field have reached an unthinkable level of maturity, many organizations still struggle with turning these advances into tangible profits. Unfortunately, many ML projects get stuck in a proof-of-concept stage without ever reaching customers and generating revenue. In order to effectively adopt ML technologies, enterprises need to build the right business cases as well as to be ready to face the inevitable challenges. In this talk, we will share common pitfalls, lessons learned, and best practices, while building different enterprise products. In particular, we will focus on the generic use case of ML as the core technology enabling customer-facing products regardless of the specific industry or application.
You will:
Understand if ML is the right solution for your business and set the right expectations;
Deal with the additional uncertainty of ML projects with respect to traditional software;
Build a balanced ML team and cover the broad spectrum of skills;
Know how to apply the scientific workflow in an agile development framework;
Learn how to turn research into production systems including engineering practices and tools;
Be able to leverage modern cloud and serverless architecture for scalable, autonomous and cheaper deployments.
Resume
I am a Servicenow Developer with relevant exp of 2.2yrs . i have worked on both the development and admin part as well.
2022-09-14-MATLABDay_SREC.pptx
This document provides an agenda and overview for a MATLAB Day event being held at Sri Ramakrishna Engineering College on September 14th, 2022. The agenda includes introductions to MATLAB and Simulink, approaches to artificial intelligence applications, model-based design, hardware integration workflows, and MATLAB coding competitions. An overview of MathWorks products and resources for students is also provided.
Rachit_HMI_Development_resume
This document contains a career summary and objective for an applicant named Rachit Kushwaha. It summarizes his work experience as a Software Engineer at KPIT Technologies developing HMI applications for instrument clusters. It also lists his academic credentials including a Bachelor's degree in Electronics and Communication Engineering with 8.55 CGPA. Key skills include embedded C programming, CAN protocol, and tools like CANoe, Lauterbach emulator, and Trace-32 debugger.
Pratik Jayawant Patil(Resume)
Pratik Patil has over 2 years of experience as an Innovation Engineer at CereBrahm Innovations and a 1 year internship at Intel India. He has expertise in languages like Java, C, C++, Python and technologies like AngularJS, MongoDB, MySQL. As an Innovation Engineer, he designed and developed features for an app that contributed to 12.9% of daily active users. He also improved database performance by 170% during peak hours. At Intel, he developed an algorithm with 4.3x better performance. Pratik has an M.Tech from Sardar Vallabhbhai National Institute of Technology and a B.E from VCET.
coa.ppt
This document describes a virtual laboratory for computer organization and architecture. It lists the principal investigator and developers involved. The objectives of the virtual labs are to encourage experimentation through curiosity and provide a learning management system with tools for learning. The introduction explains that the lab exposes students to key aspects of digital logic and computer organization through FPGA-based prototyping in a virtual environment. It is built using free and open-source software to accurately acquire data from instruments in real-time. The architecture involves a web browser, TCP/IP, and the virtual lab server. Procedures, the simulator, and examples of experiments like ripple carry adders and ALUs are described. Benefits include reduced time and work, user
Munmi_6 months_experience_cv
Munmi Talukdar is seeking a position that allows her to contribute to an organization's growth using her analytical and technical skills. She has 6 months of experience in designing and developing Java and J2EE applications. Her technical skills include Java, JSP, Servlet, OOP concepts, HTML, CSS, Eclipse, MySQL, Apache Tomcat, and Windows operating systems. She has a M.Tech from RCC Institute of Management and Technology and a B.Tech from Girijananda Institute of Management and Technology. Her projects include web applications for finding education options and supporting charities. She is confident, eager to learn, hardworking, and has patience.
Similar to Rohit mohite resume 1 (20)
Managers guide to effective building of machine learning products
Managers guide to effective building of machine learning products
Recently uploaded
Accident detection system project report.pdf
The Rapid growth of technology and infrastructure has made our lives easier. The
advent of technology has also increased the traffic hazards and the road accidents take place
frequently which causes huge loss of life and property because of the poor emergency facilities.
Many lives could have been saved if emergency service could get accident information and
reach in time. Our project will provide an optimum solution to this draw back. A piezo electric
sensor can be used as a crash or rollover detector of the vehicle during and after a crash. With
signals from a piezo electric sensor, a severe accident can be recognized. According to this
project when a vehicle meets with an accident immediately piezo electric sensor will detect the
signal or if a car rolls over. Then with the help of GSM module and GPS module, the location
will be sent to the emergency contact. Then after conforming the location necessary action will
be taken. If the person meets with a small accident or if there is no serious threat to anyone’s
life, then the alert message can be terminated by the driver by a switch provided in order to
avoid wasting the valuable time of the medical rescue team.
Object Oriented Analysis and Design - OOAD
This ppt gives detailed description of Object Oriented Analysis and design.
Beckhoff Programmable Logic Control Overview Presentation
This presentation is to describe the overview of PLC Beckhoff for beginners
3rd International Conference on Artificial Intelligence Advances (AIAD 2024)
3rd International Conference on Artificial Intelligence Advances (AIAD 2024) will act as a major forum for the presentation of innovative ideas, approaches, developments, and research projects in the area advanced Artificial Intelligence. It will also serve to facilitate the exchange of information between researchers and industry professionals to discuss the latest issues and advancement in the research area. Core areas of AI and advanced multi-disciplinary and its applications will be covered during the conferences.
Properties of Fluids, Fluid Statics, Pressure Measurement
Properties of Fluids: Density, viscosity, surface tension, compressibility, and specific gravity define fluid behavior.
Fluid Statics: Studies pressure, hydrostatic pressure, buoyancy, and fluid forces on surfaces.
Pressure at a Point: In a static fluid, the pressure at any point is the same in all directions. This is known as Pascal's principle. The pressure increases with depth due to the weight of the fluid above.
Hydrostatic Pressure: The pressure exerted by a fluid at rest due to the force of gravity. It can be calculated using the formula P=ρghP=ρgh, where PP is the pressure, ρρ is the fluid density, gg is the acceleration due to gravity, and hh is the height of the fluid column above the point in question.
Buoyancy: The upward force exerted by a fluid on a submerged or partially submerged object. This force is equal to the weight of the fluid displaced by the object, as described by Archimedes' principle. Buoyancy explains why objects float or sink in fluids.
Fluid Pressure on Surfaces: The analysis of pressure forces on surfaces submerged in fluids. This includes calculating the total force and the center of pressure, which is the point where the resultant pressure force acts.
Pressure Measurement: Manometers, barometers, pressure gauges, and differential pressure transducers measure fluid pressure.
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Blood finder application project report (1).pdf
Blood Finder is an emergency time app where a user can search for the blood banks as
well as the registered blood donors around Mumbai. This application also provide an
opportunity for the user of this application to become a registered donor for this user have
to enroll for the donor request from the application itself. If the admin wish to make user
a registered donor, with some of the formalities with the organization it can be done.
Specialization of this application is that the user will not have to register on sign-in for
searching the blood banks and blood donors it can be just done by installing the
application to the mobile.
The purpose of making this application is to save the user’s time for searching blood of
needed blood group during the time of the emergency.
This is an android application developed in Java and XML with the connectivity of
SQLite database. This application will provide most of basic functionality required for an
emergency time application. All the details of Blood banks and Blood donors are stored
in the database i.e. SQLite.
This application allowed the user to get all the information regarding blood banks and
blood donors such as Name, Number, Address, Blood Group, rather than searching it on
the different websites and wasting the precious time. This application is effective and
user friendly.
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
SELENIUM CONF -PALLAVI SHARMA - 2024.pdf
Begin your journey to contribute to Selenium - A Talk at the Selenium Conference 2024
FUNDAMENTALS OF MECHANICAL ENGINEERING.pdf
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
DELTA V MES EMERSON EDUARDO RODRIGUES ENGINEER
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Join us for this solutions-based webinar on the tools and techniques for commissioning and maintaining PV Systems. In this session, we'll review the process of building and maintaining a solar array, starting with installation and commissioning, then reviewing operations and maintenance of the system. This course will review insulation resistance testing, I-V curve testing, earth-bond continuity, ground resistance testing, performance tests, visual inspections, ground and arc fault testing procedures, and power quality analysis.
Fluke Solar Application Specialist Will White is presenting on this engaging topic:
Will has worked in the renewable energy industry since 2005, first as an installer for a small east coast solar integrator before adding sales, design, and project management to his skillset. In 2022, Will joined Fluke as a solar application specialist, where he supports their renewable energy testing equipment like IV-curve tracers, electrical meters, and thermal imaging cameras. Experienced in wind power, solar thermal, energy storage, and all scales of PV, Will has primarily focused on residential and small commercial systems. He is passionate about implementing high-quality, code-compliant installation techniques.
Butterfly Valves Manufacturer (LBF Series).pdf
We have designed & manufacture the Lubi Valves LBF series type of Butterfly Valves for General Utility Water applications as well as for HVAC applications.
Recently uploaded (20)
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
comptia-security-sy0-701-exam-objectives-(5-0).pdf
comptia-security-sy0-701-exam-objectives-(5-0).pdf
Beckhoff Programmable Logic Control Overview Presentation
Beckhoff Programmable Logic Control Overview Presentation
3rd International Conference on Artificial Intelligence Advances (AIAD 2024)
3rd International Conference on Artificial Intelligence Advances (AIAD 2024)
Properties of Fluids, Fluid Statics, Pressure Measurement
Properties of Fluids, Fluid Statics, Pressure Measurement
openshift technical overview - Flow of openshift containerisatoin
openshift technical overview - Flow of openshift containerisatoin
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
309475979-Creativity-Innovation-notes-IV-Sem-2016-pdf.pdf
309475979-Creativity-Innovation-notes-IV-Sem-2016-pdf.pdf
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Rohit mohite resume 1
- 1. ROHIT VIJAY MOHITE Email ID: rohitmohite08@gmail.com Contact No. 7875393359/9834138316 LinkedIn Profile ID: www.linkedin.com/in/rohit-mohite-57135a153 Objective: “To work for an organization which provides me the opportunity to utilize my skills and knowledge in R&D environment as a mechatronics or automation engineer for my professional and personal growth by achieving organizational goals”. Experience: Position/Department Automation Engineer-Intern/Design and Automation Organization Koyana Industrial Equipment Co. Remark ● Practical knowledge about various design aspects and conceptualizing design. ● Experience of product development. ● Experience in Creo modelling and pneumatic system design. ● Hands on experience in PLC programming and HMI. ● Knowledge of control system and LabView. Project Title: “Design and Manufacturing of MCB Switching Knob Laser Marking Special Purpose Machine”. Tool Used: Creo, LXGPC, LabView, LX- TEXTMATE Academic Qualification: Examination School/Institute Board/University Percentage /CGPA Year of Passing M.Tech (Mechatronics) Vellore Institute of Technology, Vellore Vellore Institute of Technology, Vellore 7.70 2019 B.E.(Mechanical) SITCOE, Yadrav, Ichalkaranji Shivaji University, Kolhapur 70.94% 2015 Diploma Shantiniketan Polytechnic College, Sangli Maharashtra State Board of Technical Education 70% 2012 SSC H.H.R.C.P. High school, Sangli Maharashtra State Board 78.46% 2009
- 2. Projects Undertaken: “Design and Manufacturing of MCB Switching Knob Laser Marking Special Purpose Machine” This project is in progress for my Master’s Thesis which will be completed shortly .It is related to manufacturing knobs on mass quantity for products like MCB, RCCB etc. The knob has printed marks for instruction purpose like ON/OFF and includes various mechanical components design with pneumatic system controlled by PLC and LabView for marking purpose. “Automated speed control of vehicle in restricted areas by using RF” This project is for Implementation of microcontroller based embedded system to design speed limiter and reliever circuits for speed regulation. The ‘Speed Limiter’ and ‘Reliever’ circuits are installed in the vehicle itself. “ Optimal Vector Control of Kite Tethers for Maximum Power Extraction” This project is a method of power generation which uses kites in harvesting wind power at high altitude. Designing of kites through software and finding the algorithm. “Design and simulation of electro-hydraulic system by using MATLAB and PLC” This system has designed and simulated one electro-hydraulic system for the purpose of loading a material on conveyor with two hydraulic cylinders with the help of MATLAB and Bosch Rexroth PLC software. “Design and manufacturing of robotic gripper with local heating purpose” The purpose of this project is to design a robotic gripper in the way that it will ‘pick and place’ the material and at the same time it heats the material at particular points which is known as local heating.
- 3. “Design and manufacturing of Rajgira Blooming Machine for food industry” This project includes blooming of Rajgira for production of various food products. It gives idea to improve the method of blooming used in food industry. We presented this project in National Conference on Innovations in Mechanical Engineering in April 2015 at MIT Academy of Engineering, Alandi, Pune. Certifications For participation in National Conference on Innovations in Mechanical Engineering, April 2015 at MIT Academy of Engineering, Alandi, Pune – 412105. For In-plant training at Kirloskar Brothers Ltd., Kirloskarwadi, Maharashtra. Personal Details: Address: Mansing Sadan, Mayur Housing Soc., Old Kupwad Road, Sangli - 416416 Date of Birth: 1st December, 1993 Gender: Male Languages: English, Hindi, Marathi. Nationality: Indian