Pro one green technology reduces global warming impacts

1. Breakthrough Green
Lubrication and Fuel Technologies
Reduce Global Warming Impacts
®

2. 1
Technologies
Oils and
Lubricants
Fuel
Additives

3. 2
Environmentally
Friendly
Ford Tox Number
approval
Edison
Environmental,
Health & Safety
approval
NSF Food Grade
certification
Biodegradable;
approved for
offshore drilling

4. 3
Environmentally
Friendly
REDUCE ENERGY CONSUMPTION:
Improves machinery efficiency to draw less power.
Helps engines run more efficiently, optimizing fuel economy.
PLANT BASED:
Most ProOne products are plant based, from renewable resources.
REDUCE USAGE OF PETROLEUM-BASED LUBRICANTS:
Extend oil change intervals by as much as 50%.
SAFE FOR HUMAN CONTACT:
Minimal inhalation, skin contact or ingestion problems for operators.
MINIMAL DISPOSABILITY PROBLEMS:
Formulated to be easily disposable
BIODEGRADABLE:
Downhole drilling fluid is biodegradable and approved by EPA for offshore.
FOOD GRADE:
ProOne’s greases are approved by NSF as Food Grade H-2.

5. 4
 Greases – Food Grade – soap based calcium complex
 Engine Life Treatment Oil Additive – plant based plus food grade white
mineral oil (think PAM)
 XPL+ 101 Spray Lubricant - food grade white mineral oil, zero VOCs in bulk
vs 30% in WD-40
 Industrial Oil Concentrate – plant based plus food grade white mineral oil
 Hydraulic Fluid Treatment – plant based plus food grade white mineral oil
 Downhole Drilling Fluid Treatment – biodegradable, plant based, approved
by EPA for offshore drilling in California because it kills no fish in a test that allows a
50% kill to pass
 Fuel Maximizer – plant based fuel catalyst that increases mileage and engine
life, and reduces pollution
 Waterless Wash and Shine – orange citrus based
ENVIRONMENTALLY
FRIENDLY INGREDIENTS

6. 5
XPL+ Lubrication Technology

7. 6
Fuel
Technology
Fuel Maximizer
MFC Marine
Fuel Conditioner
More efficient
combustion to
produce more
energy and less
emissions per unit
of fuel burned
Xtreme Green
Fuel Max

8. 7
ProOne Fuel Maximizer
•4-cycle Water Cooled
Type
•Turbo-Charged
Aspiration
•16
No. of Cylinders
•Mitsubishi PS8 Type x 2
Fuel Injector
•14.0: 1
Compression Ratio
•3000
Horsepower
•1800
RPM
•60
Hz
•2000
kW
•2500
kVA:
Specifications
Engine: T-1 Mitsubishi S16R-Y1PTAA2-1
New w/4 Hours July 27, 2011

9. 8
ProOne Fuel Maximizer
LOAD
40%
DIESEL
74gph
60gph
LOAD
60%
DIESEL
96gph
89gph
LOAD
80%
DIESEL/
BIOFUEL
63gph
48gph

10. 9
SAE J1321 Fuel
Consumption Stationary Test

11. 10
Standardized emissions tests conducted by: Battelle Columbus Division
Engine: Superior Model 2406D/Mitsubishi Model S6U-PTA, 4-stroke, 6-cylinder, 4300 cubic-inch
diesel engine rated at 1,400 brake-horsepower and 1,200 rpm at full load, run at 85% load to
artificially create a particulate emissions problem.
•CO emissions reduced by 10%
•HC emissions reduced by 9%
•Particulate carbon reduced by 26%
•Particulate emissions reduced by 43%
Emissions Tests

12. 11
Golden Global Brand Award
Kuala Lumpur, Malaysia 2011
Innovation, technical leadership, excellent
quality, and achieving outstanding international
environmental protection standards

13. 12
Applications

14.  TATA Buses – significant decrease in black smoke, 7-15% mileage
improvement, improvement in acceleration and top speed, reduced noise
 TATA and Leyland Diesel Trucks – 70-80% reduction in black smoke under
heavy load conditions, 8-19% mileage increase, increased power and
acceleration, most injector and fuel line problems eliminated, smoother ride
 Diesel Cars – 8-15% mileage improvement, 50% reduction in black smoke
upon starting, engine knocking and fuel line problems solved, smoother
ride
 Heavy Farm Equipment (tractors, harvesters, etc.) – torque reduced and fuel
savings up to 1 liter per hour
 Grease Using Machinery – ProOne food grade grease increases bearing life
greatly compared with any competitor
Results from Real
World Use in India

15. 14
Currently Testing
or Using ProOne

16. Solving Environmental Problems
while Saving Time & Money
www.usapro1.com
Please Visit
®