1. Summary
Applications
Features
Supports two Digital Outputs of Sink/Source.
This is a product which can be applied directly to the production site.
It is checkable on the site whether the products are defective as CANTOR has a built-in feature memorizing
CAN, PWM, Digital Output and electronic resistance output.
Built-in CAN communication restoration function
In any cases, CAN communication failure and stop do not occur as the restoration function is equipped for poor
communication occurred by poor impedance matching during CAN communication. This demonstrates an
excellent performance when using CANTOR to product endurance test which takes a long time.
High-precision open collector PWM output
CANTOR can connect maximum 50V as it has a built –in Open collector PWM output. In addition, PWM is able
to do frequency control as well as Duty rate control at the same time, and it is possible to output up to 0-10KHz.
The frequency can be controllable with 0.1Hz unit up to 0-600Hz.
Built-in electronic resistance function
CANTOR has a built-in electronic resistance 3 Channel. In the case of the test of Fuel Gauge on automobile
cluster, it is tested by using an external variable resistance.
During this process, it is required to make a separate resistance board. However, CANTOR can be tested
without making any separate resistance board as it has an internal electronic resistance. CANTOR also
supports separate external resistance connection terminals 3 Channel in order to test by connecting an external
resistance without using the internal electronic resistance.
Easy portability
CANTOR is a small size of 25cm (width) x 20cm (length) x 7cm (height), and handles are equipped on a side
for easy portability.
Supports K-Line and LIN communication 1 Channel.
Supports USB 2.0 communications.
Both AC 220V and automotive power supplies are available.
It is designed to use CANTOR by using automotive power supply when AC 220V power supply is not available.
Excellent product reliability
CANTOR offers outstanding reliability through 10-year field tests and upgrades.
Use aluminum alloy enclosure strong for external impact.
When using CANTOR on the site, aluminum alloy enclosure is used in order to protect the products from the
external impact.
Features
Support easy and diverse CAN communication environment of 4 Channel
Desired CAN communication environment can be built just by replacing CAN Bus Driver of High CAN and Low
CAN. It also supports a variety of Byte Endian such as Motorola and Intel.
Diverse tests can be usable just with simple settings.
The users are able to edit the desired tests into Excel sheet type and use them with GUI (Graphic User Interface)
software provided with the product. By using Excel sheet, the control information such as Digital Output, PWM,
CAN and electronic resistance can be set. This allows CANTOR to be applied to test site easily and fast.
No additional costs are generated for the test equipment.
When using CANTOR for automotive cluster test system, the perfect test system can be configured just with
CANTOR without any additional system.
CANTOR is a reliability tester based on CAN communication which is the most suitable for the
site conditions.
CANTOR was initially developed as a portable tester for Cluster integration test of automotive cluster
manufacturer in 2005.
CANTOR supports various CAN communications formats including Intel and Motorola.
CANTOR supports 4 CAN communications. This means 4 products can be independently and
simultaneously tested when testing products with CAN.
High speed CAN and Low speed CAN can be used by combining them just with the replacement of
CAN Bus Driver.
CAN communication protocol is realized with the easiest Interface in order to enable to use just by
inputting a simple Excel type.
The GUI program that comes with the CANTOR will help you to use CANTOR more easily.
CANTOR supports a variety of outputs such as PWM, Digital Out (Sink/Source) and electronic
resistance.
CANTOR also provides various types of output signals for product test such as PWM, Digital Output
and electronic resistance.
Frequency and duty rates are simultaneously variable for PWM, and in the case of Digital Output,
equipped over current protection circuits for each signal protects the device from damages due to an
over current of output signal.
In addition, electronic resistance provided from CONTOR makes the same test with a general resistance
test possible by entering the desired voltage.
CANTOR supports the applicable user Interface.
CANTOR is possible to create a variety of test systems with utilizing CANTOR.
Various types of application test systems can be produced by using API which is able to control
CANTOR. CANTOR provides a rich application sources.
CANTOR is a product realizing miniaturization and low-cost.
CANTOR is a product realizing high-performance, small in size and low-cost which customers want
though more than 10 years field tests.
When A/S is needed, the CANTOR users are able to perform A/S directly, fast and inexpensively.
In the case of general products, A/S shall be performed by product units. However, with CANTOR’s field knowhow
accumulated for a long time, everything from CAN Bus Driver to Main CPU is made with the unit modules. This is
made to be used by purchasing necessary modules or keeping spear parts, and replacing them quickly with a
provided A/S manual. Everyone is able to perform A/S with the most basic learning via www.youtube.com.
CANTOR is a verified product with lots of delivery performance.
This has been applied to a system in order to carrying out tests for various auto parts at Continental Automotive,
Tyco AMP and SMR for the past 10 years. Approximately 150 CANTORs have been supplied to automotive parts
manufacturers until now and continuously upgraded. CANTOR is being used at this moment for testing a variety
of products such as not only the automobile cluster but mirror and ECU.
Cluster reliability test for cars
Automotive ECU and CAN communications application products
CAN communication related products for railroad cars
Cluster for heavy equipment and CAN communications application
products
Product reliability test which CAN communications are applied
CANTOR The CANTOR selected by Cluster which is German
vehicle manufacturer
Real examples for products
Integrated electronic module test system for vehicle
CAN telecommunication (High CAN, Low CAN)
LIN telecommunication
Electronic volume
Various function test including PWM output
Compact size
Low price

2. Size
Specifications
25cm (Width) x 20cm (length) x7cm (height)
Power supply
.AC 220V 50-60Hz
Current consumption
.Less than AC 220V 50-60Hz 1A
CAN communication support
.Available up to 4 Channel
.High CAN and Low CAN configurable depending on the use of
CAN Bus Driver
.High CAN communications
- Communication speed: 100Kbit, 125Kbit, 250Kbit, 500Kbit, 1Mbit
- Byte Format: Motorola Format, Intel Format
- Expand/ Standard CAN support
.Low CAN communication
- Communication speed: 5Kbit, 10Kbit, 25Kbit, 50Kbit, 100Kbit, 125Kbit
- Byte Format: Motorola Format, Intel Format
- Expand/ Standard CAN support
.LIN 2.X communication support
.PWM output
- 6 Channel, Open Collector output
- Connectable up to 50V
- 0-10KHz (Duty rate and Frequency controllable), 0-600Hz (0.1Hz unit
Frequency controllable) and controllable by 1Hz unit for more than
600Hz
.Reostart lightning control
- 1Channel for Dashboard backlight control
.Digital Output
- Sink Output 24 Channel, Source Output 13 Channel
- Built-in over current protection circuit by each signals
.Electronic resistance
- 3 Channel, Sink Current
- Minimum control unit 0.1V
.External resistance connection terminal
- 3 Channel
- CANTOR internal electronic resistance and external resistance are
selectable by using Toggle Switch
.GUI software and API free support
No. 601 Building 4, Gyeongnam Techno Park, 21 Bongambuk 7-gil, MasanHoewon-gu, Changwon-si, Gyeonsangnam-do, Korea
Copyrightⓒ ELEC. All rights reserved. 10. 2015 Printed
Integratedelectronicmoduletestsystemforvehicle
CANTOR