This document proposes and summarizes a network solution for the ABC technologies company with offices in Georgia and New York. Some key points:
- The solution includes both wired and wireless networks to provide mobility while maintaining performance of wired connections.
- Requirements for the network include VoIP phones, surveillance cameras, wireless access, printer access across offices, and backup connectivity.
- The physical network diagrams show the layout of servers, switches, and connections for both offices.
- The proposed solution uses WAN, PoE, fiber optic and CAT6 cabling, wireless access points, a print server, and selects a carrier with redundant POPs.
- The total estimated cost is under $50,
2. Introduction
Wireless networks have given a privilege to organizations to have less cables
and slightly less management, but few more hardware component. However,
wired networks offer low losses.
In order to offer mobility and future ready services, network designed for ABC
technologies comprises of both wireless and wired network.
SNM has analyzed the key requirements of ABC technologies and crafted a
comprehensive solution that will fulfill the ABC’s current and future business
needs.
3. ABC Business Requirements
To setup a network for its office in Georgia (head office) and branch in New
York.
Office must have following
a. Setup of meeting conference room with VoIP phones and must have surveillance
camera through out the office.
b. Full Wi-Fi access with 802.11i security protection.
c. Should have backup connection in case of network failure.
d. A printer for each office which can be accessed by all the systems with in the
office.
e. Network outage and maintenance need to be informed 2 weeks prior.
f. RFID floor access will be maintained by Honeywell systems and data should be
incorporated with in their servers.
Total cost of installation should not exceed USD 50,000
Maximum time for installing the network is 12 weeks
8. Solution
To connect offices in Georgia and branch office in New York we are using WAN.
Power Over Ethernet
Optical cable(OM4)
CAT 6 UTP
Surveillance camera
Opted for carrier XYZ which uses two different POPs to connect Primary and backup networks.
Wi-Fi access point with 40*40 meter square 802.1x mode
Print server application for connecting all the systems with one printer
9. Hardware Components
Network Interface Cards
Routers (Internal routers and border routers)
Switches
Access Points (40m x 40 m square) - coverage area
Printers
VoIP Phones - voice over IP phones
RFID tags
Optical cable
UTP cable
Server/Data server
Desktop/laptop/PC
Surveillance cameras
15. Cost Estimate
Equipments Quantity Total
Network Interface Cards Pack $119.95
Routers (Internal routers and border routers) 2 $24,048
Switches 3 $1200
Access Points (40m x 40 m square) 10 $1700
Printers 1 $800
VoIP Phones - voice over IP phones 1 $159
RFID tags Pack $54
Optical cable (OM4) 5 $999.5
UTP cable (CAT 6) 11 $73.92
Server/Data server 2 $11,894
Desktop/laptop/PC 6 $42699.94
Surveillance cameras 6 $479.94
Power over Ethernet 7 $330
16. Estimated Cost and Time
The approximate cost for the overall network setup is presumed to be around.
USD 44,110.23. We have taken the best quality products and equipment's for
our set up. We are planning to get it done by 9 weeks without any
intervention of natural calamities.
17. “Professor Andrew, for your help and guidance to learn so much about data
networking “
- Team SNM
S N M