1. Objective
To be connected with an established company that will enhance my skills and capabilities
effectively and to exercise my full capacity and knowledge in the field of manufacturing, not only in the
field of engineering but also in some other aspects of work for the full benefit of the company and my
further personal development and satisfaction.
Summary of
Qualifications
• Knowledge in Assembly Equipment Operations, Repair and Maintenance Procedures, Problem
Solving Techniques, PM Analysis, Basic Statistical Process, Calibration Principles, etc.
• Computer literate (Windows based software such as MS Word, MS Excel, PowerPoint, etc. and
Lotus Notes (Electronic mail and Internet).
• Knowledge in assembly process of Electrical and Electronics system trouble shooting gain from
present and previous employment.
• Has a proficient written and oral interpersonal communications, and coordinating skills.
• Possesses strong leadership qualities and skills and able to lead, motivate and work with a
group/team to attain optimum performance
• Result oriented and able to work independently with minimum supervision
Work
Experience Process Engineer - Final Assembly
(TCAM / Reebok products / Chelsio products/Rapsodo product)
• PCA Technology (M) SDN BHD
• 12 & 12B Jalan Bayu Kawasan Perindustrian Hasil 81200 Johor Bahru, Johor,
Malaysia
• July 29, 2011 - Present
Duties and Responsibilities:
• Design and implement optimum engineering processes through the use of FMEA and control plans
• Review the process flow to enhance quality and productivity through Best Practices Assembly
Process, Error Proofing and Work Instruction.
• Review materials and production concessions, conduct evaluations, prepare engineering report for
Michael Reyes Godoy
Block C 17-03A Pangsapuri Persiaran Tanjung,
Jalan Persiaran Tanjung, Taman Bukit Aliff, 81200 Johor Bahru, Johor Malaysia
Contact No. +6014-9870516
E-mail address: michael_godoy@pcatechnology.com.sg
mico_godoy@yahoo.com
Position Applied: Product / Process Engineer
2. Mechanical Assembly (Back End) Processes and prepare part approval submission.
• Support NPI activities for new/existing customer.
• Generate, coordinate and ensure proper implementation of ECN/ECR.
• Conduct cycle time studies to optimize and stabilized process.
• Establish failure analysis to identify sources of reject, and taking corrective actions to address rejects
through engineering integrations.
• Carry-out process improvement project to improve safety, quality, yields, scraps, downtime, cycle
time / capacity, cost.
• Perform supplier audit to key supplier and suppliers having quality problems.
• Support customer request for product modification and special or new requirement.
• Lead technicians for effective manufacturing support that contributed to key performance indication
such as first pass yield, failure aging days and scrap.
Program Engineer - Hewlet Packard Customer (Sparrow / Pashosh products)
• PCA Technology (M) SDN BHD
• 12 & 12B Jalan Bayu Kawasan Perindustrian Hasil 81200 Johor Bahru, Johor,
Malaysia
• Jan 04, 2014 - Present
Duties and Responsibilities:
• Serve as a contact window between the customer and internal departments to ensure effective
transfer of information
• Respond to customer inquiry and needs.
• Recognizes potential problem are against the plan and coordinate implementation of solutions.
• Discuss with relevant process engineer for the process flow, jig/tool/equipment used, material used,
machine parameters, machine programming and production process plan/work instructions for all
manufacturing processes
• Ensure the products meet the shipment schedule.
Process Engineer-EOL (Deflash/Trim/Form/Singulation, Marking & Mold)
• Amkor Technology Philippines Inc.
• KM 22 East Service Road Special Economic Zone Cupang, 1702
Muntinlupa City Philippines
• April 23,2006 to July 10, 2011
3. Duties and Responsibilities:
• Drives/generates programs geared toward improvement in cost, productivity and quality for
manufacturing needs.
• Attends to all customer issues, provides data analysis and their corrective and preventive
measures. Troubleshoots problems in manufacturing lines and responds to customer complaints
on technical matters.
• Is assigned special projects or programs to attain plant targets such as yield goals.
• Generates and reviews process documents such as specifications and work standard guides to be
used and implemented in production.
• Ensures adherence to customer standards and recommends actions like stopping production and
hold shipment if necessary to contain and correct quality problems.
• Ensures quality of work to the satisfaction of customers (internal or external).
• Complies with the proper operating procedures of safety and health standards/regulations.
Equipment Engineer
Station: Mark/ DTFS / Mold
SSOP Maintenance Eng’g. Dept. End of Line
• Amkor Technology Philippines Inc.
4. • KM 22 East Service Road Special Economic Zone Cupang, 1702
Muntinlupa City Philippines
• June 28, 2004 to April 22,2006
Duties and Responsibilities:
• Analyze machine problems and perform direct engineering methodology approach of trouble
shooting
• Resolve open issues with other concerning qualities
• Coordinate production regarding their priorities in line
• Perform equipment line sustaining activities, repair and maintenance, set –up (mechanical),
trouble shooting, electrical and electronics system to maximize machine utilization.
• Generate technical design innovations for yield improvements, cost reduction and machine
utilization improvement.
• Evaluate and validates new machines or machines project for quality improvements prior to actual
production run.
• Perform fabrication of machine parts and other mechanical related job.
• Release job order, purchase requisition and withdraw needed parts for equipment improvement,
modification and problem corrective action.
• Generate reports and analysis on low yield affected lots.
• Recommend improvement plans on all station to attain good quality and yield improvement.
• Explain and discuss line issues and priorities to superiors.
• Communicate all concerns with process engineering and production groups.
• Driving and support TPM, quality improvement team and gemba kaizen program.
End of Line Technician – Hermetics
Test and Equipment Eng’g. Department
• Team Pacific Corp.
• FTI Complex, Taguig City
• May 02 2000 – June 16, 2004
•
Machine
Laser and Ink Marking Machine
• Dysec fully automated laser marking / EO Technics Laser
5. Handled
• Dysec fully automated ink marking / Teca Print
• Dong Yang fully automated laser marking / Rofin Sinar Laser
• Hanmi fully automated laser marking / EO Technics Laser
Form, Trim and Singulation Machine
• Fully Automated Hanmi Cam Press Machine
• Fully Automated Hanmi Hydraulic Press Machine
• Fully Automated ASM Hydraulic Press Machine
Mold Press Machine
• Daichi fully automated machine mold press machine
• Fujiwa Seiki SD type mold press machine
• Fujiwa Seiki Conventional type mold press machine
• Kinergy fully automated frame loader
•
Training’s &
Seminars
Attended
• 8D with RCA
• Failure Mode and Effect Analysis
• Presentation Skills
• Measurement System Analysis
• Spare Parts Management
• Rofin Sinar Laser Level 2 Training
• Dongyang Level 3 (Machine Calibration)
• How to Design Poka-yoke Solution
Educational
Background
Bachelor of Engineering
Major in Manufacturing and Production
Technological University of the Philippines
Amkor CEP (Continuing Education Program)
Jan 2007 – July 2010
Electronics Technology
Don Bosco Technical College – Mandaluyong City
Industrial Technician Course
1996 – 1999
Cainta Catholic College
Secondary Education
Cainta, Rizal
1992 – 1996
6. Personal
Data
Birth Date : Dec. 29,1978
Birth Place : Cainta, Rizal Philippines
Civil Status : Married
Height : 5’ 6”
Weight : 180 lbs.
7. Personal
Data
Birth Date : Dec. 29,1978
Birth Place : Cainta, Rizal Philippines
Civil Status : Married
Height : 5’ 6”
Weight : 180 lbs.