Construction Métallique I Assignment I4-GCI 39th

1. Institute of Technology of Cambodia
Faculty of Civil Engineering and Department of Civil Engineering
Find the Classification of Cross-Section
Classification
Reference
Eurocode 3
TOME II 1.(Prof. LY Hav)
RDM(Prof. VONG Seng)
ADS (Prof. VONG Seng)
Lecturer : Mr. LY Hav
Group : I4-GCI B
Student : KUY Limeng
ID: e20190482
Diagrams N, V, M and Deflection
Thickness of Cross-Section and Activities
Find the Moment Inertia
Objective
The purpose of this project is to know how to find materials to mock up I-Beam. There are many materials in
this process, such as steel cutting motors, polishing motors, steel plates and epoxy of glue. The I-beam is the
kind of beam that is used the most often in structural steel construction. There are many types of steel beams of
differentsizestousein theconstructionof steelstructures.
Mock Up I-Beam
Find P load
In this process, we bought steel and cut it in three
partssuchasawebandtwoflanges.Wework asa
team because we need to a long steel and it need
to spend much money, so we decided to work as a
team, but we do the connecting steel I-Beam
individual. Because of the small sample steel,
mockupI-BeamsoweusedtheEpoxy SteelGlue
toconnectthesteel.
Procedure
Location
We find the Moment Inertia in local axis
which is axis y and z. We follow to the
methodthatwestudiedinRDM.
Equipment
SteelPlate
AngleGrindingMachine
Polishingpaper
Therearesomeequipmentin theprocess:
Digital Caliper
Marker
Epoxy Steel Glue
Safety
How to find materials and create the mock up I-Beam.
The I-beam is the kind of beam that is used the most
often in structural steel construction. There are many
types of steel beams of different sizes to use in the
construction of steel structures.
Calculate the parameter related to I-Beam Cross-Section