1. Kimhk12@gmail.com KIM RODERICK HUFFMAN 720-205-6926
PROFESSIONAL EXPERIENCE
Rooney Engineering Inc, a Tetra Tech Company, Centennial, Colorado
Sr. Electrical Engineer, 2010 to 2015
 Designed power, lighting and control systems for pump terminals and off-loading petroleum
facilities.
 Provided design specifications and purchase from utility to end device.
 Design 4160 V and 480 V power distribution, motor control for equipment with motors up to
5,000 horsepower, cable specification and routing, equipment control, and area lighting.
Zachry Engineering Corp, Denver, Colorado
Electrical Engineer V, 2000 to 2010
 Designed power, lighting and control systems for power generating facilities up to 35 KV.
 Provided design upgrades and project management duties for multiple electrical systems
for power plant projects within the Xcel Energy company. The work included coal, hydro,
combined cycle, simple cycle combustion turbine, and alternative power plants. Typical
projects include: installation facilities design, power distribution, process equipment, UPS
and emergency installations, all with fire and electrical code conformations. Performed FAA
and FCC permitting and lightning protection system design.
Behrent Engineering Company, Wheat Ridge, Colorado
Electrical Engineer V, 1997 to 2000
 Designed power, lighting, control systems and served as the project Engineer for cement
plant projects.
 Designed power, lighting, control systems, and construction management duties for the
electrical portion of the project and field engineering for Rinker Materials, Miami Project.
Power systems included 35 kV, 15 kV and 5 kV class power distributions, motor control for
equipment with motors up to 15,000 horsepower, cable specification and routing, conveyor
control, area lighting, and lightning protection system.
Rader Railcar Incorporated, Denver, Colorado
Electrical Engineering Supervisor, 1995 to 1997
 Manager and electrical engineer for installation of all railcar electrical distribution systems
 Developed company electrical standards and codes regulating electrical design,
construction, by using NEC, AAR, and AMTRAK standards
Metron, Incorporated, Denver, Colorado
Engineering Division Manager, 1992 to 1995
 Established and assured compliance to engineering standards, codes, design practices
and manufacturing procedures
 Provided project management directions
 Developed ISO-9001, 9002, 9003 documents for company certification
Project Engineer, 1985 to 1986
 Redesigned company products to utilize materials and reduce total manufacturing costs
 Tested products and assisted in quality control preparations and customer service
 Researched and developed new products for manufacturing
 Repaired and provided start-up for fire pump controllers

2. EG&G, Inc., (Rocky Flats Plant)
Plant Electrical Engineering Manager, 1986 to 1992
 Responsible for plant electrical standards/codes regulating electrical design, construction
and plant code authority
 Managed twenty-seven electrical department personnel and department budgets
 Supervised departmental procedure compliance for Rocky Flats Nuclear plant
 Engineered electrical distribution systems from 13.8 KV to 120 V
 Negotiated outside engineering contracts
Reynolds Electrical Engineering Company, Inc. (EG&G), Las Vegas, Nevada
Senior Electrical Engineer III, Nevada Test Site, 1983 to 1985
 Supervised 34 journeymen wiremen to prepare electrical and electronic devices including
motors, motor control centers, power distribution and generation with associated controls
 Engineered/designed power distribution systems for electrical drilling rigs, high tonnage
cranes, large capacity compressors, blower systems, and generator load sharing systems
with utilities
 Evaluated and promoted safety and efficiency suggestions
Stearns-Roger Engineering Corporation, Denver, Colorado
Instrumentation Designer, 1980 to 1983
 Devised, sized, specified and requisitioned equipment for industrial control, HVAC, process
equipment, associated annunciation, and pneumatic control systems
 Developed and checked drawings including equipment placement, PI/D's, equipment
schedules and control interconnections
Solar Innovations, Incorporated, Midland, Texas
President/Engineer/Foreman (Co-owner/Operator), 1978 to 1980
 Formulated/constructed and designed energy conservation and transfer systems; utilized
existing solar technology
 Contracted, engineered and installed mechanical and HVAC systems for commercial
buildings, multi-family dwellings and spec-residential housing developments
Bourroghs, Incorporated, Lubbock, Texas
Field Engineer, 1976 to 1978
 Serviced electronic and manual bank equipment, and large frame computer systems
 Contracted, and serviced accounting equipment for private firms and insurance companies
EDUCATION
Bachelor of Science, Engineering Technology (Electrical/Electronic)
Texas Technological University, Lubbock, Texas
PROFESSIONAL SOCIETIES AND ORGANIZATIONS (Past and Present)
 Society of Engineering Technology
 National Society of Professional Engineers, Honorary Member
 National Managers Association
 IEEE Society IAS/POWER/Management Chapter
 Society of Fire Protection Engineers
 International Electrical Inspectors Association
 Eagle Scout / Commissioner/ Assistant Scout Master for Boy Scouts of America
Page 2 of 2