The CompTIA Network+ certification is an internationally recognized validation of the
technical knowledge required of foundation-level IT network practitioners.CompTIA Network+ is
accredited by ANSI to show compliance with the ISO 17024 Standard.And For Best And Most
Related Study Material to Prepare For ComptIA N10-006 Exam the best place is pass4sureusa.
These Guys are providing some extraordinary study guides by which your success is ensured.
2. CompTIA N10-006 Exam Introduction
Test Purpose: This exam will certify that the
successful candidate has the knowledge and
skills required to trouble shoot, configure,and
manage common network wireless and wired
devices,establish basic network design and
connectivity, understand and maintain network
documentation,identify network limitations and
weaknesses,and implement network security,
standards,and protocols.
The CompTIA Network+ certification is
an internationally recognized
validation of the technical knowledge
required of foundation-level IT
network practitioners.CompTIA
Network+ is accredited by ANSI to
show compliance with the ISO 17024
Standard and, as such, undergoes
regular reviews and updates to the
exam objectives.
3. CompTIA N10-006 Exam Candidates
It is recommended for CompTIA
Network+ candidates to have the
following:
CompTIA A+ certification or
equivalent knowledge, though
CompTIA A+ certification is not
required.
Have at least 9 to 12 months of
work experience in IT
networking.
4. CompTIA N10-006 Exam Objectives
The given table lists the
domains measured by this
examination and the extent
to which they are
represented. CompTIA
Network+ exams are
based on these objectives.
Domain % of Exam
Network architecture 22%
Network operations 20%
Network security 18%
Troubleshooting 24%
Industry standard , practice,
and network theory
16%
TOTAL 100%
5. CompTIA N10-006 Exam Q&A
Realbraindumps Presenting
you the Real test Questions
Answers Pack (Pdf File).
6. CompTIA N10-006 Sample Q&A
QUESTION NO: 1
Multiple students within a networking
lab are required to simultaneously
access a single switch remotely. The
administrator checks and confirms
that the switch can be accessed
using the console, but currently only
one student can log in at a time.
Which of the following should be
done to correct this issue?
A. Increase installed memory
and install a larger flash module.
B. Increase the number of VLANs
configured on the switch.
C. Decrease the number of
VLANs configured on the switch.
D. Increase the number of virtual
terminals available.
Answer:D
7. CompTIA N10-006 Sample Q&A
QUESTION NO: 2
A user with a 802.11n WLAN
card is connected to a SOHO
network and is only able to
connect at 11 Mbps with full
signal strength. Which of the
following standards is
implemented on the network?
A. 802.11a.
B. 802.11ac.
C. 802.11b.
D. 802.11g.
Answer:C
8. CompTIA N10-006 Sample Q&A
QUESTION NO: 3
Which of the following
would be used in an IP-
based video conferencing
deployment? (Select
TWO).
A. RS-232.
B. 56k modem.
C. Bluetooth.
D. Codec.
E. SIP
Answer:D,E
9. CompTIA N10-006 Sample Q&A
QUESTION NO: 4
A wireless network technician for a local
retail store is installing encrypted access
points within the store for real-time inventory
verification, as well as remote price checking
capabilities, while employees are away from
the registers. The store is in a fully occupied
strip mall that has multiple neighbors allowing
guest access to the wireless networks. There
are a finite known number of approved
handheld devices needing to access the
store's wireless network. Which of the
following is the BEST security method to
implement on the access points?
A. Port forwarding.
B. MAC filtering.
C. TLS/TTLS.
D. IP ACL.
Answer:B
10. CompTIA N10-006 Sample Q&A
QUESTION NO: 5
A technician just completed a new external
website and setup access rules in the
firewall. After some testing, only users
outside the internal network can reach the
site. The website responds to a ping from
the internal network and resolves the
proper public address. Which of the
following could the technician do to fix this
issue while causing internal users to route
to the website using an internal address?
A. Configure NAT on the firewall.
B. Implement a split horizon DNS.
C. Place the server in the DMZ.
D. Adjust the proper internal ACL.
Answer:B
11. CompTIA N10-006 Sample Q&A
QUESTION NO: 6
A technician needs to ensure that
new systems are protected from
electronic snooping of Radio
Frequency emanations. Which of the
following standards should be
consulted?
A. DWDM.
B. MIMO.
C. TEMPEST.
D. DOCSIS.
Answer:C
12. CompTIA N10-006 Sample Q&A
QUESTION NO: 7
When a client calls and describes a
problem with a computer not being
able to reach the Internet,in which
of the following places of the OSI
model would a technician begin
troubleshooting?
A. Transport layer.
B. Physical layer.
C. Network layer.
D. Session layer.
Answer:B
13. CompTIA N10-006 Sample Q&A
QUESTION NO: 8
A network engineer is troubleshooting an issue with a
computer that is unable to connect to the Internet. The
network engineer analyzes the following output from a
command line utility:
Network DestinationNetmask Gateway Interface
192.168.1.0 255.255.255.0 192.168.1.254 eth0
192.168.1.10255.255.255.255 192.168.1.10 eth0
127.0.0.1255.0.0.0 On-Link lo
127.0.0.0255.0.0.0 On-Link lo
255.255.255.255255.255.255.255 102.168.1.10 eth0
Which of the following is the reason for the computer
issue, given the above output?
A. Wrong default gateway netmask.
B. Incorrect default gateway address.
C. Default gateway on the wrong
interface.
D. Missing default gateway.
Answer:D
14. CompTIA N10-006 Sample Q&A
QUESTION NO: 9
A technician has finished configuring
AAA on a new network device.
However, the technician is
unable to log into the device with
LDAP credentials but is able to do so
with a local user account.Which of
the following is the MOST likely
reason for the problem?
A. Username is misspelled is the
device configuration file.
B. IDS is blocking RADIUS.
C. Shared secret key is mismatched.
D. Group policy has not propagated
to the device.
Answer:C
15. CompTIA N10-006 Sample Q&A
QUESTION NO: 10
When convergence on a
routed network occurs, which
of the following is true?
A. All routers are using hop count as the
metric.
B. All routers have the same routing
table.
C. All routers learn the route to all
connected networks.
D. All routers use route summarization.
Answer:C
16. Best of Luck For Your Future
We and Our
Team wish
All Our
Customers
All The Best
For Their
Exam as
well as for
Their future.