AB Chiller Is Known for Chillers manufacturer & Supplier in India. We Are Having 25 Years of Experience. We Specialized in Engineering and Fabrication of Chillers.
For More Details Visit:
https://www.abchiller.in/
2. Chiller
• A chiller is a machine that removes heat from a liquid via
a vapor-compression or absorption refrigeration cycle.
• This liquid can then be circulated through a heat
exchanger to cool equipment, or another process stream.
3. Chiller ▪ Chillers are quite useful in cooling as well as
dehumidifying air in industrial as well as commercial
facilities.
▪ There are generally categorized as water cooled or air
cooled with different kinds of chillers available such as
centrifugal, reciprocating, screw driven and absorption
chillers.
5. Kinds of Chillers
▪ Centrifugal Chillers: In big chillers there are
centrifugal fans for compressing refrigerant gas.
These also have water cooled condensers which
work in tandem with the cooling towers.
▪ Reciprocating Chillers: Here the motor is
completely enclosed with refrigerant circuit with
small size pistons. They have air cooled
condensers and utilize R-22 refrigerant.
6. Kinds of Chillers
▪ Screw Chiller: These are also completely
enclosed and can be powered by gas, electric
motors or steam turbines.
▪ Absorption Chiller: They have less electrical
power needs and are normally powered using a
heat source like hot water or steam.
8. Maintenance Tips
Refrigerant Charge: Cooling by any equipment is dependent upon the amount of
refrigerant moving through compressor.Thus it is important to keep required
refrigerant level to achieve best conditioning. If refrigerant charge is low, then it will
result in more work for the compressor and have lesser cooling effect.
Compressor Oil: Every year you need to send the lubrication oil for performing
spectrometric chemical analysis. In case it is found that moisture is high then it will
mean a problem with purge unit.You also need to test the oil filters for things like
pressure drops and will have to replace them in case oil charge is also replaced.
9. Maintenance Tips
Non-Condensable:Things like moisture and air get into any low-pressure equipment due to the fact
that their evaporators work within a vacuum.These non condensable can result in lower efficiency of
the equipment by about 4% in case of 60% load and by as much as 7% in case of 100% load.The
solution is using purge units which are able to reduce the effect of these non condensable.
Starter Operation:According to chiller manufacturers you need to regularly test sensor and safety
calibrations of microprocessor controls to ensure efficient operation of motors as well as starters.
10. ABChiller AB Chillers is a flexible, futuristic and
knowledge-based company delivering
quality chillers.
We are the 25 years chillers
manufacturers in Coimbatore, India
using best quality raw materials and
contemporary technology under the
guidance of our experts in Compliance
with The Set Quality Standards.