1. Jason Brendon Kilmister
Address: 4 Amber Link
Wellard, 6170
Western Australia
Mobile: +61 449 788 876
Email: jkilmister@me.com
Date of Birth: 27 December 1968
Personal Profile
• I take pride in been a proficient and a dependable team member.
• Hard working with a good attitude towards safety and in a team enviroment.
• Have used heavey machinery in the past like tip trailers and large front end loaders
• Two and Half years as a Geophysical Wireline operator in varius Iron Ore Land Drill
Rigs and Mine sites around Western Australia and the Northern Territory.
• Just under 3 Years as a Senior Field Operator - Wireline for Baker Hughes Working
Onshore and Offshore Drill Rigs around the Coast of Australia.
• Four years experience as a Slickline Operator working on offshore as well as land
Rigs on high pressure/high temp completions in New Zealand.
• Proficient at running a full range of Century Logging tools
Pass daily drug and alcohol testing
Licence’s and Certificates
• Dangerous Goods Security Card - 2015
• MSIC – FEB 2015
• CSTP - Common Safety Training Program
• BOSIET Helicopter underwater escape training and sea survival – 11/2012
• ELMAR 10K Pressure Control school June 2014
• Heavy Rigid Drivers Licence
• Work At Heights – RIIOHS204A - 2015
• Heavy Forklift Operations High Risk License – RIIHAN201A
• Dog man High Risk License - 2014
• Conduct Civil Construction Skid Steer Loader Operations – RIIMPO318B - 2015
• Use portable fire equipment course – PRMPFES05B - 2013
• Control Minor Incidents - MSAPMOHS205A
• Follow Emergency Response Procedures - MSAPMOHS110A
• Conduct Local Risk Control – RIIRIS201A
• Work Safely - MSAPMOHS200A
• Baker Hughes - Radiation Safety Training.
• Baker Hughes - Explosives Safety Training.
• Baker Hughes - Field Operator School.
• Santos Four Wheel Drive Course – PMA SUP236B
• Santos Moomba Induction and Moomba Security Pass.
• Santos Moomba Heat Stress Course.
• Survive At Sea In The Event Of Vessel Abandonment – TDMMF1107B
• Undertake Fire Response To Fire Incidents – MSAPOHS212A
• Undertake Helicopter Safety And Escape – PMAOHS214B
• Apply Offshore Facility Safety Abandoment And Sea Survival Precedures –
PMAOHS215B.
• Wellsite Permit To Work – WLL141212
2. • Intermediate Xcel course
• Lock holders course
• Licensed in the use and handling of radioactive tools in conjunction with borehole
logging – 2010 – Renewed 2015
Employment Summary
Baker Hughes Atlas October 2012 – June 2015
Senior Field Operator 3 - Wireline
• Currently working between the Jack Bates, Knoble Clide and the Ensco 109/104,
Stena Clyde, Outwood Eagle Offshore Drill rigs.
• Cooper Basin Cased hole and Open hole Wireline Duties on Various Drill and
Completion Rigs.
• Rigging up and proper use of Pressure Control Equipment.
• Driving Various Logging vehicles around the Cooper Basin.
• PM in comming tool’s ready to be sent back out
• Setting up and running various logging tools in open hole and cased hole Oil & Gas
Wells
• Santos (Moomba) site and Heat stress induction
• Elmar 10k Pressure Control trained and certified
• Setting bridge plugs on wireline
• Use gardian safety fire perforating and BST setting tools
• Proficient in the safety use of Explosives for perforating, severing of stuck pipe,
setting of bridge plugs.
• Started PCL training.
• Highly trained in full operations using Zone power and Asep logging skid units.
• Worked on highly deviated wells using Welltech tractor units
Surtech Systems
Geophysical Wireline Operator April 2012 – October 2012
• Duties included:
• Running Century Density, Gamma, Neutron and Resistivity logging tools in
Boreholes as well as water bores.
• Daily Drilling Rig inrod Gamma survey’s and Deviation Logging as requested by the
client
• Century Gyroscopic Deviation tool
• Gyrosmart Gyroscopic Deviation tool
• BHP pit permit induction
• Area C Security induction
• Proficient at runing a full range of Century and Gyrosmart Logging tools
• Maintain the logging unit to high standars
• Undertake Fire Response To Fire Incidents – MSAPOHS212A
• Undertake Helicopter Safety And Escape – PMAOHS214B
• Apply Offshore Facility Safety Abandonment And Sea Survival Procedures –
PMAOHS215B
• Currently Working at Yandi Site for BHP Billiton
3. • Radiation course, Licensed in the use and handling of radioactive tools in conjunction
with borehole logging.
• Senior First Aider
• BHP Waio Course
Pilbara Wireline Services May 2010 – April 2012
Geophysical Wireline Operator
• Duties included running Century Density,Gamma ,Neutron and Resistivity logging
tools in Boreholes as well as water bores.
• Daily inrod Gamma survey’s
• Gyroscopic Deviation tool
• Maintaing logging unit to high standars
• FIFO Rostered thru out Western Australia for FMG and various other Mining
Company’s.
• Crosslands (Jackhills) mine site in the Pilbara region and Territory Iron Resources
(Frances Creek) mine site in Darwin doing Geophysics borehole Logging.
• Radiation course, Licensed in the use and handling of radioactive tools in conjunction
with borehole logging.
• Senior First Aider
• Current National Police Clearance
• Blue Card
• Intermediate Xcel course
• Full health surveillance completed for the Pilbara and Northern Territory.
• Heavy Forklift Operations license
• Health and safety in the work place course
• Advanced 4x4 driving and recovery course
• Rio Tinto HSE induction course
• Lock holders course
• Pass daily drug and alcohol testing
• FIFO experience in both Western Australia and Northern Territory
Fonterra 2001 – 2010
Plant Production Operator
• Leval Seven production plant maintenance and operational duties in the process of
Lactose.
Vause Wireline Services 1997 - 2001
Slickline Operator
• Expertest Wireline Services NZ, Ltd then self contracted to Vause Oil Production
Services when they took over the Expertest New Zealand branch.
• Well completions and function testing of downhole equipment.
• Trained by Vause Slickline to perform the following tasks:
• Setting up and running of Kinley Caliper into various wells
• Setting and pulling Otis X and R line plugs, isolation and separation tools
• Pressure testing and function testing bottom-hole Pre assemblies for pre work over
drilling completions.
4. • Gas lifting equipment using Merla and various Otis and Camco running and pulling
tools.
• Downloading and programming of BHPT Spartek Gauges.
• Pressure testing and function testing of the TRSCSSSV, Clamping and running in-
hole in conjunction with Drilling and work over rigs.
• Opening and closing Camco and Otis sliding sleeves.
• Running SCHLUMBERGER MPLT (LEE) tool using Slickline unit on various wells.
• Proficient at Excel for Slickline and Spartek gauge reports.
• Wax cutting using Slickline unit and servicing automated wax-cutting units.
• Bailing. Dump bailing using acid or pre work-over.
• Fishing using Slickline tools as well electric line perforating guns
• Wellhead isolation as well as servicing and testing
• Running and pulling of NRV’s and tree test plugs (FMC and Cameron).
• Swabbing.
• Drift runs using various size gauge ring and Lead impression blocks.
• Pressure testing and running of 10,000-psi equipment for off shore and onshore high
pressure wells.
• Use industrial Forklifts in conjunction with day to day operations
Referees
Doug Birse
Workshop Supervisor
Baker Hughes
39 Miguel Rd ,Bibra Lake 6163
+61 429 832 577
Andrew Moffit
Site Production manager
Fonterra Foods
New Zealand
+64 62748869
Yazdan Saeedabadian
Offshore Operations Manager
Baker Hughes
39 Miguel Rd ,Bibra Lake 6163
+61 413 420 371