Recommended
Recommended
More Related Content
Recently uploaded
Recently uploaded (20)
Featured
Featured (20)
Automation OPEN source Remote I/O for TCP capable PLCs
- 1. ABSIO16R605 Description Protocol Converter/Multi I/O module: 104mm x 89mm foot print • 2x RS485/RS232 ports Ethernet on board or wireless • I/O mix of 16 bit I/O 8AI/8AO • 3x 24bit differential AI with Gain (suitable for load cells/bridge inputs) • On-board protocols supported S7, Modbus TCP Server, Modbus RTU Master/Slave • Logic capable for Totalizers/PID control. Interlocks and sequencing. This board design supports the following processor mother boards: • Amtel: Nano V3.0 ATMEGA328P, Arduino UNO, MEGA2560, and Due ARM CORTEX M3 • STMicroelectronics: STM32F411RET6 ARM Cortex-M4 NUCLEO-F411RE Module • and others including the following... Main processors start with the smallest of units as sub assemblies like: Nano ATmega328P V3 CH340G Board 5V for ABSIO16r605
- 2. Nano ATmega328P V3 CH340G Board 5V Inserts on P-0 socket as silk screened V5 operation jumper for i2c bus power selectable. process@BioProcessAutomation.com Another AMTEL processor for applications requiring more memory or I/O SainSmart Mega2560 R3 Board ATmega2560-16AU + ATMEGA16U2 USB Cable for Arduino SainSmart Mega2560 R3 Board ATmega2560-16AU Inserts on P-1 socket as silk screened V5 operation jumper for i2c bus power selectable process@BioProcessAutomation.com For higher speeds and multiple communication peripherals the DUE is (the top end of the Arduino family) is supported, this requires Jumpers to be set for 3.3V operation: ARM-based development board DUE AT91SAM3X8E CortexM3 compatible with Arduino
- 3. ARM-based development board DUE AT91SAM3X8E Cortex M3 Inserts on P-1 socket as silk screened V3.3 operation jumper for i2c bus power selectable must use 3.3V select jumpers process@BioProcessAutomation.com And can utilize for the high end applications an ARM Cortex M4 STM32F411RET6 ARM Cortex-M for NUCLEO-F411RE Module + ST-LINK/V2 (mini) STM32F411RET6 ARM Cortex-M4 for Inserts on P-1 socket as silk screened V3.3 operation jumper for i2c bus power selectable must use 3.3V select jumpers process@BioProcessAutomation.com Communications boards supported Modbus RTU and ProfiBus. At sockets R0 and R-1(also supported are RS232 with DSR and CTS.)
- 4. MAX485 RS-485 Module TTL to RS-485 module Unserts on R0/1 socket as silk screened V5 operation jumper for i2c bus power selectable must use 3.3V select jumpers process@BioProcessAutomation.com Protocol converters available for PreSens and for YSI analyzers. MODBUS RTU, ASCII, and Profibus.
- 5. Wireless application support at socket R-0 NRF24L01+ 2.4GHz Wireless RF Transceiver Module 2PCS Arduino NRF24L01+ 2.4GHz Wireless RF Transceiv... Inserts on R-0 socket as silk screened V3.3 operation jumper for SPI bus power selectable may use 3.3V select jumpers for this board may accept 5V inputs. process@BioProcessAutomation.com And for small footprint Ethernet applications including S7 and Modbus TCP. E-0 and E-1 sockets support. Mini W5100 LAN Ethernet Shield Network Module board PROFINET or ModbusTCP
- 6. And for small motion control systems or pump drives D-0,D-1, D-2 sockets support 3 AXIS Multi axis Stepper Driver DRV8825 or Pololu A4988
- 7. HX711 Dual-channel 24-bit A/D Conversion PGA Sensor Module HX711 Dual-channel 24-bit A/D Conversion or differential inputs Inserts on S-0/1/2 sockets as silk screened V3.3 or V5 operation jumper for TWI bus power selectable must use 3.3V select jumpers process@BioProcessAutomation.com And differential or single ended analog inputs are supported by sockets A-0 and A-11 For Arduino ADS1115 Module 4 Channel 16 Bit I2C ADC With Pro Gain Amplifier Tested with serveral industrial 24VDC two wire transmitters.
- 8. I also offer 4 channel analog output boards to use on sockets A-0 and A-1 I2C slaves include the 3 AXIS motor driver for 5A DC or 3A Steppers speed and position control protocols supported over I2c with ABSI2C4988n This whole I/O assembly can act as remote I/O for Allen Bradley or Siemens S-7 1200,1500 or other PLC processors.