JDSRAINA'S PPT ON GREEN ENGINE

2. OVERVIEW:
WHAT IS GREEN ENGINE TECHNOLOGY?
NEED TO INVENT
ENERGY CRISIS
WORLD ENERGY CONSUMPTION
FEATURES OF GREEN ENGINE
CONSTRUCTION
WORKING
COMPARISION BETWEEN CONVENTIONAL ENGINE AND GREEN ENGINE
APPLICATIONS
CONCLUSION
REFERENCES

3. What is Green
Engine
Technology ?

4. ✔ Green engine is one of the most interesting invention for the
automotive industry..
✔ The efficiency of this engine is high as compared to the
contemporary engines and also the exhaust emissions are nearly
zero..
✔ The significance of the engine lies in the efficiency when the
present world conditions of limited resources of energy are
considered..

5. NEED TO INVENT
 Today world is facing major problem due to energy crises.
 Along with this we are facing major environmental troubles
due to increase in harmful gases which are evolved from no
where else but the combustion of the conventional energy
sources.
 Major portions of the fuels is burnt in the
engines used for various purposes like
automobiles, generators, power plants etc.,.
 Statistics show that the daily consumption
of petroleum all over the world today is
40 million barrels , of which 50 percent
is for automobile use.

6. ENERGY CRISIS
canada
Austrailia
russia
namibia
niger
kazakhastam
USA
INDIA
PAKISTAN
GERMANY

7. World Energy Consumption

8. Features Of Green Engine
The Green Engine is an actual six phase internal
combustion engine.
There are no pistons in this .
The essential feature is the expansion ratio
being much bigger than the compression ratio.

9. Construction
A Set of Vanes A pair of rotors
No. of pot like
containers
Air intake ports
A pair of fuel
injectors
Spark plugs

10. Six Phases of Green Engine
Power
Exhaust
Combustion
Mixing
Compression
Intake

11. Working
 The air arrives through the air intake
port and passes through the duct that
generate strong swirls when it gets
compressed in the chamber.
 The air from the duct is pushed into
small chambers in rotor, the rotating
places the compressed air before the
injector.
 As soon as chamber comes in front of
injector it sprays the fuel into the
compressed air .
This air fuel mixture is sent to other end
of rotor.

12.  The spark plug ignites the air fuel
mixture. As soon as the whole charge is
ignited ,the small chamber rotates to
position in front of narrow exit.
 As the gas rushes out of the chamber
through narrow opening, the sudden
increase in volume ensures that
more power is released.
 As the thermal energy is fully utilized,
the exhaust gasses bring less heat
energy.
Because of the complete burning,
poisonous gases are absent.

13. Comparison Between Conventional Engine And
Green Engine
 Direct air intake
 Direct fuel injection
 Strong swirling
 High Expansion Ratio
 Sequentially Variable Compression Ratio
 Super air fuel mixture
 Controllable Combustion Time
 Lowest surface to volume ratio
 High Working Temperature

14. ADVANTAGES
Small size and light weight
Multi fuel
Near zero emission
Smooth operation
Vibration free

15. Ideal to hydrogen fuel
Quietness and low
exhaust temperature
Fast accelerating
response
Low cost
High reliability

16. APPLICATIONS
IN AUTOMOBILES
IN AIRCRAFTS
MILITARY USE
SHIPS AND SUBMARINES

17. Green Steam Engine

18. Green engine in airplanes

19. AUDI’S A4 Green Engine Car

20. Kawasaki's Green Engine

21. CONCLUSIONS
Pollution is minimized by green engine.
 It has unique design
The limitations have not been determined to any extent
Green engine can work with large variety of fuels which
makes it good choice for using non conventional fuels like
biodiesel.
It’s a new revolutionary engine technology.

22. REFERENCES:
http://www.greenenginetech.com
http://www.streamauthors.com
http://www.slideshare.com
http://www.howstuffworks.com
www.seas.upenn.edu/~meam100/handouts/green
engine.pdf
Introduction to IC Engines by
MATHUR AND SHARMA

23. THANK YOU