1. RESUME
Hrishikesh Bhagawati Krushnakunj Apartment,
Satpute Road,
Pimple Gurav.
Pune-411061.
Ph#: +91-8007196649
E-mail: hrishikeshbhagawati@gmail.com
5 years of experience in CAE Structural Analysis
Objective
Seeking a position to utilize my skills and abilities in a company that offers greater
knowledge and professional growth. I have a vision to be on a job where I could be
shouldering responsibility of leading a team of like-minded young men and women
in a reputed organization with utmost dedication
Work Experience
Working at Visteon Engineering Center India Pvt Ltd, Pune (15th November 2010-
Till date) as a CAE Analyst
Summary
Individual handling of a Finite Element Modeling (Shell/Hex/Tetra Mesh) of Door
panels, Radiator assemblies, Instrument panel, Cluster Assembly including
connections/boundary conditions
Performing Analysis (Static/NVH/FRF etc) and Post processing for various
components/assemblies in automobile domain
Performing optimization in design for components so that it fulfills required design
criteria
Report preparation and sharing them with customers for better transparency in
projects
Coordinating with customers/suppliers on daily basis with audio/video conferencing
to accomplish better quality product in given timeline
Knowledge transfer to juniors/suppliers and helping them in projects when stuck,
for faster work performance and better insight domain knowledge
Prepare and share weekly “Project timesheet” with customers in weekly meetings
Keep tracks of newly arrived projects and deciding timelines/resource allocation for
the same
Software Proficiency
Hypermesh, Abaqus, Nastran, LS Dyna Optistruct , Pamcrash, Hyperview.
Analysis Project
Static analysis (loading/unloading) at armrest position in rear door panel.
Objective: To examine any plastic deformation or rupture in armrest for loading
and unloading conditions.
2. Software Used: Hypermesh, Abaqus, Hyperview
Static loading/unloading condition is performed at armrest
Post Processing in Hyperview
Different iterations of design modification in Armrest is performed so as to prevent
plastic deformation / rupture
Suggest improvement to Design team
Report generation to share results with customers
FRF analysis of Radiator assembly.
Objective: To check if the radiator assembly fails under external Excitation
Software Used: Hypermesh, Abaqus, Hyperview
Stress and displacement corresponding to its natural frequencies are considered
when an external excitation is applied in Z axis to the assembly
Optimization is done in one of the mountings of the assembly to increase its
natural frequency to the desired value
Report generation to share results with customers
Modal analysis of Instrument Panel assembly.
Objective: To check whether the natural frequency is above the desired criteria
and to suggest modifications if it fails to do so
Software Used: Hypermesh, Nastran, Hyperview
Modal analysis of the IP assembly is performed
Different iterations are performed in IP design (glove box, console) to bring the
natural frequency as desired by the client
Report generation to share results with customers
Sunload Analysis of instrument panel.
Objective: Perform sunload analysis to see mode shapes and displacements
Software Used: Hypermesh,Abaqus,Hyperview
Temperature of 110 degree centigrade is applied to the upper part of the IP and
rest parts are given a temperature of 80 degree centigrade
Modification is performed in the IP to bring the maximum displacement as
suggested by customer
Report generation to share results with customers
Static analysis of front door (LH and RH door).
Objective: Different loads were applied in mappocket to see it fails at those
applied loads
Software Used: Hypermesh,Nastran,Hyperview
Point load is applied in the map pocket and stresses / displacement considered
Modification in design of map pocket is done to bring stresses within yield stress of
the material
Report generation to share results with customers
Side Impact Analysis (pelvis/abdomen) of door panel (Front and Rear)
assembly.
3. Objective:To perform Side impact analysis of door assembly and suggest
modification
Software Used: Pamcrash, Hyperview
Impactor (pelvis/abdomen) is included and positioned accordingly
Energy curve and force-displacement curve is obtained for both the simulations
Design modification is performed in the padding / mappocket to bring the force-
displacemt curve within the given corridors
Report generation to share results with customers
Audio panel assembly ( Modal analysis, Frequency Response analysis).
Objective:To check the highest stresses in Audio panel to see if there is any
possibility of failure due to external excitation
Software Used: Hypermesh, Nastran, Hyperview
Excitation of 3G is applied to the mounting locations of the audio panel in vertical
direction.
Suggest improvement to Design team
Report generation to share results with customers
Meshing Projects
Radiator Assembly (Hex/Shell)
Software Used: Hypermesh,Nastran,Hyperview
Header_tube modeling (complete hexahedral elements by maintaining strict fillet
radius betwen tube to header joint)
Tank modeling (shell elements with hexahedral base elements)
Contacts applied between various parts
Pressure of 1 MPa is applied to the assembly
Educational Qualifications
Post Graduate Diploma in Product and Tool Design (year 2010)
Bachelors in Mechanical Engineering (year 2008)
H.S.C (2004)
S.S.C (2002)
Achievements and awards-
Received award twice for continuous dedicated support on Exterior program.
Attended three days internal training on “Abaqus”.
Attended three days internal Training on “Optistruct”
Attended two days Training on “Effective presentation skills”
Received Appreciation from clients for dedicated projects
Attended two days Training on “Interpersonal Skills”
Attended two days HTC12 Seminars conducted by Altair Engineering held in Pune.
Received runners up on Visteon Table Tennis Tournament
Attended two days training on “Product Development Life Cycle-Automotive”
4. Personal Dossier
Date of Birth : 15th
December 1985
Linguistic Abilities : English, Hindi, Assamese
Permanent Address: C/o Satish Ch Bhagawati, Pub Sarumotoria, 9th
Bye lane
P.O. Hengerabari, Guwahati - 781036, Assam
Alternate Contact No. : 09864030406