Connecting technology
What connecting fittings from Hettich join together just doesn't come apart. Solutions for any jointing task, for flexibility in design and construction today and tomorrow. Permitting the choice of classic and many new lightweight materials. Simple to use in production and assembly. Technology that stays put – perfection that's expected. From Hettich.
2. 2
Why use Connecting Fittings ?
▪ Supplies reliable and easy to use solutions for more difficult
connections in furniture construction.
▪ It is Knock Down (KD Fittings) with which you can easily assemble
and dismantle the furniture number of times.
▪ Solutions that open up numerous design options using classic or
lightweight materials.
▪ The manufacturers who are making modular furniture will always use
connecting fittings instead of conventional joinery.
▪ Convenient on-site assembly.
▪ Economical in transportation when disassembled.
▪ Hettich connecting fittings is brimming with expertise for perfect
results.
▪ Very strong sturdy connections between shelves and side panels.
▪ They do not come apart when joined and is a robust fitting.
▪ The life of the fitting is very long.
8. 8
Rastex 15
Features
▪ With torque support – allows furniture sides to be pulled into place
from space up to 4 mm from the panel end
▪ Twice as secure thanks to internal and exterior indentations – the
dowel is always pulled in to the centred position, ruling out any
displacement of furniture components
▪ Eccentric cam can be tightened with flat-blade screwdriver, Pozidrive
screwdriver PZ 3 or Allen key A/F 4
▪ With or without rim, the rim covers any jagged drillings, making an
additional cover cap unnecessary
▪ Zinc die-cast
13. 13
Rastex 25
Features
▪ The latching stages on the curved tensioning surface and saw tooth
like exterior indentations prevent the eccentric cam from working
loose
▪ The dowel is always tightened centrically
▪ The reverse torque is three times higher than that of comparable
eccentric cam fittings
▪ Without rim
▪ Zinc die-cast
15. 15
VB 20/21
Features
▪ For strong, positive fitting and friction locked connections between
shelves and side panels, high load capacity.
▪ The fitting is pressed into a double hole drilled 32 mm apart. Insertion
holes with 30 and 10 mm dia.
▪ The shelf can be inserted from above (VB 20). The shelf can be
inserted from above or from the front (VB 21).
▪ The eccentric can also be tightened in the bottom panel from above.
A through hole is required in the bottom panel for this purpose.
▪ For special applications, a plinth adjustment element can also be
adjusted through the fitting
▪ Zinc die-cast nickel plated
▪ Can be used in System 32
17. 17
VB 35M (with rib)
Features
▪ Small connecting fittings for sturdy, positive fitting and friction locked
connections between shelves and side panels using the tried and
proven eccentric latching principle
▪ The fitting is pressed into the cropped 20 mm diameter drilling
▪ The fitting has a spherical eccentric
▪ Zinc die-cast / plastic
▪ Can be used in System 32
18. 18
VB 35 (without rib)
Features
▪ Small connecting fittings for sturdy, positive fitting and friction locked
connections between shelves and side panels using the tried and
proven eccentric latching principle
▪ The fitting is pressed into the cropped 20 mm diameter drilling
▪ The fitting has a spherical eccentric
▪ Zinc die-cast / plastic
▪ Can be used in System 32
19. 19
VB 36M (with rib)
Features
▪ Small connecting fittings for sturdy, positive fitting and friction locked
connections between shelves and side panels using the tried and
proven eccentric latching principle
▪ The fitting is pressed into a double hole drilled 32 mm apart. Insertion
holes in a diameter of 20 and 10 mm
▪ The fitting has a spherical eccentric
▪ Zinc die-cast / plastic
▪ Can be used in System 32
20. 20
VB 36 (without rib)
Features
▪ Small connecting fittings for sturdy, positive fitting and friction locked
connections between shelves and side panels using the tried and
proven eccentric latching principle
▪ The fitting is pressed into a double hole drilled 32 mm apart. Insertion
holes in a diameter of 20 and 10 mm
▪ The fitting has a spherical eccentric
▪ Zinc die-cast / plastic
▪ Can be used in System 32
23. 23
VB 54 Toolex
Features
▪ Tool-less shelf mounting to the cabinet body
▪ For 3 mm and 5 mm dia. hole lines
▪ Flexible locking catch in the connector housing for easy shelf
removal, shelves can then be refitted at any time
▪ Housing rim always ensures correct housing position even in holes
that are drilled too deep
▪ Wide range of screws for mounting supports in 3 mm and 5 mm dia.
hole lines
▪ Zinc die-cast nickel plated / grey plastic
24. 24
VB 135
Features
▪ The VB 135 connecting fitting is pressed into the cropped 20 mm dia.
drilling
▪ The shelf can only be inserted from above
▪ The bottom panel with the VB 135 is merely pressed onto the dowel.
The wedging effect pulls the bottom panel to the side and prevents it
from falling out
▪ Can be used for shelves in a thickness of 16 mm and over
▪ Plastic
▪ Can be used in System 32
25. 25
Alfa Stop/Beta
Features
▪ Alfa Stop support part with quick locking feature for combining with
the Beta housing element
▪ Support part can be locked into the side of the cabinet body with the
aid of a screwdriver
▪ Zinc die-cast nickel plated
26. 26
Rostrino
Features
▪ Detachable connecting fitting with catch springs
▪ Easy installation and removal of the cabinet body
▪ For concealed installation
▪ Can be used for cabinet body connectors
▪ Brace dowel and socket using a 4 mm size A/F hexagon socket
spanner, with an additional hole drilled in the panel, screw in socket
with 10 mm size A/F hexagon socket spanner
▪ Connecting fitting with dowel and socket
▪ Zinc die-cast
28. 28
TZ4
Features
▪ With premounted screw
▪ All-metal TZ 4: angled screw for particularly easy installation
▪ Base section with spikes
▪ Housing: zinc die-cast or plastic
▪ Base section: steel
29. 29
TZ4 STD & TZ 28
TZ4 STD
▪ With premounted screw
▪ Catch mechanism in top component makes installation easy
▪ Oblong hole compensates for expansion / contraction of up to 4 mm
in solid wood
▪ Housing: zinc die-cast nickel plated
▪ Base section: steel
TZ 28
▪ For pressing in
▪ Socket length 10 mm
▪ Attached by 4 mm o countersunk screw, with the capability of holding
screwdriver at an angle
▪ Plastic, white
31. 31
VB 25T
Features
▪ For sturdy, positive fitting and friction locked connections with high
load capacity
▪ An integrated 90° angle gear with hexagon socket permits quick and
convenient bracing using a cordless screwdriver or A/F 5 mm size
hexagon socket spanner
▪ Dowel length 60 - 70 mm
▪ Min. housing hole depth 20 mm
▪ Housing hole diameter 25 mm
▪ Through-hole dia. 7 mm
▪ Housing: zinc die-cast
▪ Bolt and socket: galvanised steel
32. 32
VB 35T
Features
▪ For sturdy, positive fitting and friction locked connections with high
load capacity
▪ An integrated 90° angle gear with hexagon socket permits quick and
convenient bracing using a cordless screwdriver or A/F 5 mm size
hexagon socket spanner
▪ Dowel length 65 - 75 mm
▪ Min. housing hole depth 20 mm
▪ Housing hole diameter 35 mm
▪ Through-hole dia. 7 mm
▪ Housing: zinc die-cast
▪ Bolt and socket: galvanised steel
33. 33
VB 90-180T
Features
▪ For sturdy, positive fitting and friction locked connections with high
load capacity
▪ Infinitely adjustable for angled connections of 90° - 180°
▪ An integrated 90° angle gear with hexagon socket permits quick and
convenient bracing using a cordless screwdriver or A/F 5 mm size
hexagon socket spanner
▪ Dowel length 60 mm
▪ Min. housing hole depth 20 mm
▪ Housing hole diameter 25 mm
▪ Through-hole dia. 9 mm
▪ Housing: zinc die-cast
▪ Bolt: galvanised steel
35. 35
AVB 4
Features
▪ For sturdy, positive fitting and friction locked connections between
worktops
▪ Quick and convenient bracing using a cordless screwdriver or A/F 5
mm size hexagon socket spanner
▪ Drilling depth at least 20 mm
▪ Housing hole diameter 35 mm
▪ Housing: zinc die-cast
▪ Bolt / counterplate: galvanised steel
36. 36
AVB 4 Slim
Features
▪ Suitable for panel thicknesses of 14 mm and over
▪ For sturdy, positive fitting and friction locked worktop connections
▪ Quick and convenient bracing using a cordless screwdriver or A/F 4
mm size hexagon socket spanner
▪ Dowel length 42 - 49 mm
▪ Housing hole diameter 25 mm
▪ Drilling depth at least 12.5 mm
▪ Housing: zinc die-cast
▪ Bolt / counterplate: galvanised steel
37. 37
AVB 5
Features
▪ For sturdy, positive fitting and friction locked worktop connections
▪ With two curved clamping plates
▪ Two premounted clips ensure easy installation: They hold the
clamping plates and connectors in position or groove, permitting
easy insertion into drilling or routed recess – while leaving both
hands free for bracing
▪ Housing hole diameter 35 mm
▪ Drilling depth at least 20 mm
▪ Galvanised steel
39. 39
EverFix with Threaded Stud
Features
▪ This inconspicuous connecting fitting merely consists of a threaded
stud and a knock in socket with spring steel disc
▪ Components can easily be pressed together by hand to produce a
non detachable connection
▪ Pull-out strength 500 N
40. 40
EverFix with Duplo
Features
▪ This inconspicuous connecting fitting merely consists of a threaded
stud and two knock in sockets with spring steel disc
▪ Components can easily be pressed together by hand to produce a
non detachable connection
▪ Pull-out strength 500 N
42. 42
MultiClip
Features
▪ MultiClip can be used in many different applications
▪ For wall panelling, room dividers, cladding pillars, ceiling panelling,
fascia's and cladding of all types
▪ In all applications, the fitting can be screw mounted either parallel or
at right angles to the fascia or cladding component
▪ If it is necessary to slide the clip connectors on from the front, one of
the fittings is screw mounted at an angle of 90°
▪ Whether for interior fittings, contract work or volume production, this
fitting is a cost-saver - always and everywhere
▪ Only 1 fitting component for all types of application
▪ The clip connector components provide a secure hold with spring
loaded flexible clamps and serrated surfaces
▪ Variable screw on positions permit to hooking in from above, from the
front, from the side as well as flush fitted
▪ Compensation for mounting tolerances
▪ Clip connectors can be adjusted for perfect alignment
▪ Thermoplastic material, black (heat resistant)
44. 44
VB 90
Features
▪ This fitting is ideal for connecting cabinet elements or front panel
components positioned at extreme angles
▪ The joint adjusts to all angles from 30° to 270°
▪ Zinc die-cast nickel plated
▪ Attached with screws for direct fixing in 5 mm diameter holes or with
M6 hexagon head screw and socket no. 100 for 10 mm diameter
holes
▪ The VB 90 is incredibly easy to install: to begin with, the fitting is
attached to the first side and then pushed onto a screw premounted
on the second side. If doors are to open by an angle of less than 90°
a hexagon head screw should be used for this purpose so as to
permit final fixing with an open-ended spanner.
45. 45
VB 16 & VB 160
VB 16
▪ The wide clamping range from 36 to 46 mm accommodates
all profile cross-sections
▪ The high clamping force presses the mitres together to
produce a tight fit
▪ Zinc die-cast, galvanised
VB 160
▪ For shallow door frames or cornices
▪ Recess depth 10 mm
▪ Housing: brown plastic, Angle: galvanised steel
46. 46
RV 1 & RV 3
RV 1
▪ Can be mounted in hole line drillings of 5 mm dia.
▪ Fitting holds rear panel tight against cabinet body side
▪ Zinc die-cast nickel plated
▪ Can be used in System 32
RV 3
▪ Oblong hole compensates drilling tolerances
▪ Attachment with direct fixing screw dia. 6.3 mm
47. 47
RV 7 D & RV 8
RV 7 D
▪ With the RV 7 D, the rear panel is secured from the inside
▪ This makes assembly work easier because the cabinet can be
assembled off the wall
▪ The RV 7 D can be mounted with various fixing elements: with
countersunk screw, with M6 x 12 panhead screws (DIN 7985)
and threaded cap or socket, with direct fixing screw or with the
MultiClip
▪ Height adjustable by +/- 1 mm at oblong hole
▪ Zinc die-cast nickel plated
▪ Can be used in System 32
RV 8
▪ For fixing drawer bottom panels and rear panels
▪ Plastic, white
▪ Screw dia. 3.5 x 20 mm galvanised
51. 51
Euro Angle for 32 mm Hole Line
Features
▪ Can be used as a multi-purpose connecting fitting for
cabinet bodies, shelves, rear panels and drawer fronts
▪ Connecting brackets: galvanised steel
▪ Plastic cover cap
▪ Direct fixing screws, dia. 6.3 mm
▪ Can be used in System 32
52. 52
Universal Corner Connector
Features
▪ Universal corner connector for small cabinet bodies
and for supporting low loads
▪ Must be attached with 3.5 mm dia. countersunk screw
▪ The moulded on cover cap closes off the corner
connector and conceals the screws
▪ Plastic
53. 53
Universal Angle – 41.5 x 41.5 mm & 31 x 31 mm
Universal Angle – 41.5 x 41.5 mm
▪ Galvanised steel
Universal Angle – 31 x 31 mm
▪ Galvanised steel
54. 54
Keyhole Fitting – 42 mm & 62 mm
Keyhole Fitting – 42 mm
▪ Galvanised steel
Keyhole Fitting – 62 mm
▪ Galvanised steel
56. 56
Direkta 2 & Connecting Screw VHS 32
Direkta 2
▪ With drilled head and Pozidrive screw
▪ Galvanised steel
Connecting Screw VHS 32
▪ Unobtrusive cabinet body connectors for a particularly firm hold
▪ For drilling diameter of 5 mm
▪ The connecting sleeves are 27 or 35 mm long
▪ The threaded sleeve is set back, making it easier to screw the
connecting screw in
▪ Screw M4 x 15 mm / connecting sleeve: nickel plated steel
57. 57
End Screw & Threaded Sleeve
End Screw
▪ M4 thread
▪ Suitable for use with M4 threaded sleeve, see below
▪ Pozidrive screw
▪ Galvanised steel
Threaded Sleeve
▪ For M4 thread
▪ For drilling diameter of 5 mm
▪ Suitable for use with end screw, see above
▪ Galvanised steel
59. 59
Socket no. – 49, 30 & 33
Socket no. 49
▪ For M6 thread
▪ Drilling diameter 8 mm
▪ Suitable for use with Rastex 15 / 25, VB 20 / 21 and VB 35 / 36
▪ Plastic, white
Socket no. 30
▪ For M4 thread
▪ Drilling diameter 8 mm
▪ Suitable for use with Rastex 15 / 25, VB 35 / 36 and VB 135
▪ Plastic, white
Socket no. 33
▪ For M6 thread
▪ Drilling diameter 10 mm
▪ Suitable for use with Rastex 15 / 25, VB 20 / 21 and VB 35 /
36
▪ Plastic, white
60. 60
Socket no. – 100, M5 x 11 mm & Expanding Socket
Socket no. 100
▪ For M6 thread
▪ Drilling diameter 10 mm
▪ Suitable for use with Rastex 15 / 25 and VB 35 / 36
▪ Plastic, white
Socket M5 x 11 mm
▪ For M5 thread
▪ Drilling diameter 10 mm
▪ Plastic, white
Expanding Socket
▪ For M4 thread
▪ Drilling diameter 5 mm
▪ Suitable for use with Rastex 15 / 25, VB 20 / 21 and VB 35 /
36
▪ Steel, galvanised
62. 62
Shallow Countersunk Head & Deep Countersunk Head
Shallow Countersunk Head
▪ Shallow countersunk head
▪ Pozidrive screw
▪ Galvanised steel
Deep Countersunk Head
▪ Deep countersunk head
▪ Pozidrive screw
▪ Galvanised steel
64. 64
Pan Head, Countersunk Head & Rear Panel Screw
Pan Head
▪ Panhead
▪ Pozidrive screw
▪ Galvanised steel
Countersunk Head
▪ Countersunk head
▪ Pozidrive screw
▪ Steel
Rear Panel Screw
▪ Ф 3 x 20 mm
▪ For attaching the rear panel
▪ Pozidrive screw
▪ Galvanised steel
65. 65
Special Screw
Features
▪ Ф 5 mm
▪ For attaching the drawer front panel
▪ Pozidrive screw
▪ Galvanised steel
Features
▪ Ф 6.3 mm
▪ For attaching the drawer front panel
▪ For 5 mm o drilling
▪ Pozidrive screw
▪ Galvanised steel
67. 67
For Drilling Diameter – 5 mm, 8 mm & 10 mm
Features
▪ For drilling diameter of 5 mm
▪ Plastic
Features
▪ For drilling diameter of 8 mm
▪ Plastic
Features
▪ For drilling diameter of 10 mm
▪ Plastic
69. 69
Plinth Foot Korrekt
Features
▪ Fitting system comprising height adjustable legs, fixing blocks, plinth
clips and other accessories
▪ Load capacity per leg 450 kg, maximum of 1350 kg for 3 or more legs
▪ Plinth foot is held securely in the fixing block when installing and
repositioning the cabinet
▪ Large contact surface of dia. 78 or 80 mm
▪ Simple height adjustment
▪ Plinth drawers can be fitted from a plinth height of 150 mm
▪ Plastic, black
70. 70
Adapter & Universal Fixing Block – Screw On & Press In
Adapter
▪ For extending the plinth foot by 50 mm
▪ Plastic, black
Universal Fixing Block – Screw On
▪ Plastic, black
▪ Screw On
Universal Fixing Block – Press In
▪ With integrated mount for panel clip
▪ Plastic, black
▪ Press In
▪ With 4 Dowels
71. 71
Universal Fixing Block – Press In & Planform Fixing Block
Universal Fixing Block – Press In
▪ With integrated mount for panel clip
▪ Plastic, black
▪ Press In
▪ With 2 Dowels
Planform Fixing Block
▪ Also suitable for angled and round
plinths
▪ With integrated mount for plinth clip for
plinth panels
▪ With surface to support side panel
▪ Plastic, black
72. 72
Universal Fixing Block & Planform Fixing Block – Knocking In
Universal Fixing Block
▪ Can additionally be secured with screws
▪ Can be removed by pulling out the expanding dowels
▪ With integrated mount for panel clip
▪ With surface to support side panel
▪ Plastic, black
▪ With 2 expanding dowels
Planform Fixing Block
▪ Also suitable for angled and round plinths
▪ Can additionally be secured with screws
▪ Can be removed by pulling out the expanding dowels
▪ With integrated mount for panel clip
▪ Drawing shows version with support surface
▪ Plastic, black
73. 73
Plinth Clip
Features
▪ For front and side plinths, material thickness 19 mm
▪ Panel must be 4 mm lower than height of plinth
▪ Suitable for use with Planform fixing block, please order separately
▪ Panel clip is pushed into the fixing block and the plinth panel
subsequently clamped
▪ Plastic, white
Features
▪ For front plinths, material thickness 12 - 16 mm
▪ Panel must be 4 mm lower than height of plinth
▪ Can be used in conjunction with pressing in / knocking in Universal fixing
block and Euro fixing block for screwing on, please order separately
▪ Panel clip is clipped onto the front panel and pushed sideways into the
fixing block for installation
▪ Plastic, white
74. 74
Plinth Clip
Features
▪ For front and side plinths
▪ Installation: clipping onto plinth foot
▪ Suitable for plinth heights of 70 mm and over
▪ Plastic, black
Features
▪ For front and side plinths, min. material thickness 12 mm
▪ For knocking in
▪ Panel must be 2 mm lower than height of plinth
▪ Installation: Plinth is clamped below the cabinet body
▪ The back of the panel must rest against the fixing block and plinth foot
at the top and bottom
▪ Steel, chrome plated
75. 75
Euro Plinth Foot
Features
▪ Fitting system comprising height adjustable legs, fixing blocks and
other accessories
▪ Load capacity 450 kg / leg, maximum of 1350 kg for 3 or more legs
▪ Leg is securely held in the fixing block, simple height adjustment
▪ Plinth drawers can be fitted from a plinth height of 150 mm
▪ Plastic, black
76. 76
Adapter & Fixing Block
Adapter
▪ For extending the plinth foot by 50 mm
▪ Plastic, black
Fixing Block
▪ With surface to support side panel
▪ Plastic, black
Fixing Block
▪ With integrated mount for panel clip
▪ With surface to support side panel
▪ Plastic, black
77. 77
Panel Clip & Plinth Panel Holder
Panel Clip
▪ For front plinths, material thickness 12 - 16 mm
▪ Panel must be 4 mm lower than height of plinth
▪ Suitable for use with fixing block order no. 0 071
848, see above
▪ Plastic, white
Plinth Panel Holder
▪ For front and side plinths
▪ Installation: clipping onto plinth foot
▪ Plastic, black
79. 79
Systema Top 2000 for Side Panel
Features
▪ For cabinets with a plinth height of at least 60 mm, continuous side panel
or separate plinth and suitable for office cabinets, partitions and wall-to-
wall units
▪ Adjustment range 60 - 80 mm or 80 - 120 mm, Height can be adjusted
through the bottom panel (4 mm A/F) and easy installation in System 32
in combination with eccentric connecting fittings VB 20 / 21
▪ Adjustment can be made through the connecting fitting and the plinth clip
is designed for a space of 37 mm from plinth rear face to spindle centre
▪ The groove for the clip in the front plinth is positioned for the centre of the
housing. However, the clip can also be used at any other height position
within the housing.
▪ The plinth adjuster has a load capacity of 300 kg / each, 900 kg max. for
three or more legs
▪ The direct spindle guide inside the housing makes sure furniture stands
firmly
▪ Since the plinth adjustment fitting is symmetrical, it can be used on left or
right
▪ Can be used in System 32
▪ Steel, white plastic
80. 80
Systema Top 2000 for Centre Panel
Features
▪ For cabinets with a plinth height of at least 60 mm, continuous side panel
or separate plinth and suitable for office cabinets, partitions and wall-to-
wall units
▪ Adjustment range 60 - 80 mm or 80 - 120 mm, Height can be adjusted
through the bottom panel (4 mm A/F) and easy installation in System 32
in combination with eccentric connecting fittings VB 20 / 21
▪ Adjustment can be made through the connecting fitting and the plinth clip
is designed for a space of 37 mm from plinth rear face to spindle centre
▪ The groove for the clip in the front plinth is positioned for the centre of the
housing. However, the clip can also be used at any other height position
within the housing.
▪ The plinth adjuster has a load capacity of 300 kg / each, 900 kg max. for
three or more legs
▪ The direct spindle guide inside the housing makes sure furniture stands
firmly
▪ Since the plinth adjustment fitting is symmetrical, it can be used on left or
right
▪ Can be used in System 32
▪ Steel, white plastic
83. 83
Metal Bracket & Adjustment Screw
Metal Bracket
▪ Galvanised steel
Adjustment Screw
▪ The fitting allows a cabinet with blind
panels to be braced and horizontally
aligned between floor and ceiling
▪ Galvanised steel
Adjustment Screw
▪ For aligning shelf units, room dividers
and partitions
▪ With adjustment nut and steel foot
▪ Galvanised steel
84. 84
Adjustment Screw & Tube Cap
Adjustment Screw
▪ For aligning shelf units, room dividers and
partitions
▪ With adjustment nut and impact resistant
plastic foot
▪ Galvanised steel, black plastic
Tube Cap
▪ For 30 x 30 x 2.5 mm square tubes
▪ Zinc die-cast
86. 86
Safety & Sekura
Safety
▪ Steel pin with plastic support surface
▪ Can be used in System 32
▪ Load group L 50 (50 kg / m2)
Sekura 1.1
▪ Pin diameter 5 mm
▪ 1 additional pin for shelf
▪ Can be used in System 32
▪ Load group L 75 (75 kg / m2)
▪ Zinc die-cast nickel plated
Sekura 2
▪ Pin diameter 5 mm
▪ Can be used in System 32
▪ Load group L 75 (75 kg / m2)
▪ Zinc die-cast nickel plated
87. 87
Sekura & Universal D
Sekura 2.1
▪ Pin diameter 5 mm
▪ Can be used in System 32
▪ Load group L 75 (75 kg / m2)
▪ Zinc die-cast nickel plated
Sekura 6
▪ Pin diameter 5 mm
▪ 1 additional pin for shelf
▪ Can be used in System 32
▪ Load group L 75 (75 kg / m2)
▪ Zinc die-cast nickel plated
Universal D
▪ Pin diameter 5 mm
▪ Can be used in System 32
▪ Load group L 75 (75 kg / m2)
▪ Zinc die-cast nickel plated
88. 88
Sekura & Duplo
Sekura 7
▪ Drilling diameter 5 mm for direct fixing
screw, countersunk head, Ф 6.3 mm
▪ Drilling diameter 3 mm for countersunk
screw Ф 4 mm
▪ Each with one additional pin for shelves
▪ Zinc die-cast nickel plated
▪ Can be used in System 32
▪ Load group L 75 (75 kg / m2)
Duplo
▪ Pin diameter 5 mm on both sides
▪ Steel
▪ Can be used in System 32
▪ Load group L 50 (50 kg / m2)
89. 89
Sekura & Push In Shelf Support
Sekura 8
▪ Glass shelf supports
▪ Pin diameter 5 mm
▪ Can be used in System 32
▪ Load group L 75 (75 kg / m2)
▪ Zinc die-cast nickel plated / Plastic transparent
Push in Shelf Supports
▪ Drilling diameter 5 mm
▪ Can be used in System 32
▪ Load group L 50 (50 kg / m2)
▪ Galvanised steel
Push in Shelf Supports with Shoulder
▪ Pin diameter 5 mm
▪ Can be used in System 32
▪ Load group L 50 (50 kg / m2)
▪ Steel galvanised
90. 90
Alfa Glass & Glass Shelf Support
Alfa Glass
▪ Quick-locking shelf support for glass shelves
▪ For 8 - 12 mm thick glass, Drilling diameter 5 mm
▪ Can be used in System 32
▪ Load group L 25 (25 kg / m2)
▪ Zinc die-cast nickel plated
Glass Shelf Supports
▪ With soft plastic cap
▪ Load group L 50 (50 kg / m2)
▪ Galvanised steel / clear plastic
Glass Shelf Supports with Plastic
▪ With tilt prevention
▪ Pin diameter 5 mm
▪ Can be used in System 32
▪ Load group L 25 (25 kg / m2)
▪ Plastic, transparent
91. 91
Shelf Supports
Glass Shelf Supports
▪ For glass thicknesses 4 - 6 mm
▪ With tilt prevention, Drilling diameter 5 mm
▪ Can be used in System 32
▪ Load group L 25 (25 kg / m2)
▪ Zinc die-cast nickel plated / transparent plastic
Flattened Shelf Supports
▪ Drilling diameter 5 mm
▪ Can be used in System 32
▪ Load group L 25 (25 kg / m2)
▪ Galvanised steel
Grooved Shelf Supports
▪ For grooved bottom panels
▪ Pin diameter 5 mm, Can be used in System 32
▪ Load group L 25 (25 kg / m2)
▪ Zinc die-cast, bright
92. 92
Shelf Studs & Vari Shelf Support Rails
Shelf Studs
▪ Pin diameter 5 mm
▪ Can be used in System 32
▪ Plastic, transparent
Vari Aluminium Shelf Support Rail, 11 x 6 mm
▪ Standard length: 3500 mm
▪ Load group L 50 (50 kg / m2)
▪ Aluminium, bright
93. 93
Vari Shelf Support Rails
Vari Steel Shelf Support Rail, 10 x 5 mm
▪ Standard length: 3500 mm
▪ Steel
▪ Load group L 50 (50 kg / m2)
Vari Steel Shelf Support Rail, 16 x 6 mm
▪ Standard length: 3500 mm
▪ Steel
▪ Load group L 50 (50 kg / m2)
94. 94
Titan Shelf Support
Titan 1 with Side Adjustment
▪ Concealed installation behind the shelf
▪ Bolt: 10 mm A/F
▪ Max. load capacity is 50 kg/m2 for shelves measuring 1000 x 300
mm, 100 kg/m2 for shelves measuring 1000 x 250 mm and 160
kg/m2 for shelves measuring 1000 x 200 mm
▪ Max. load capacity includes the weight of the panel
▪ Max. load capacity with 2 shelf supports
▪ Height adjustment: ± 4 mm
▪ Side adjustment ± 4 mm
▪ Minimum shelf thickness: 24 mm
▪ Adjustment of shelf tilt
▪ Galvanised steel
95. 95
Titan Shelf Support
Titan 1
▪ Concealed installation behind the shelf
▪ Bolt: 10 mm A/F
▪ Max. load capacity is 50 kg/m2 for shelves measuring 1000 x 300
mm, 100 kg/m2 for shelves measuring 1000 x 250 mm and 160
kg/m2 for shelves measuring 1000 x 200 mm
▪ Max. load capacity includes the weight of the panel
▪ Max. load capacity with 2 shelf supports
▪ Height adjustment: ± 4 mm
▪ Minimum shelf thickness: 24 mm
▪ Adjustment of shelf tilt
▪ Galvanised steel
96. 96
Titan Shelf Support
Titan 2
▪ Concealed installation behind the shelf
▪ Bolt: 12 mm Ф
▪ Max. load capacity is 50 kg/m2 for shelves measuring 1000 x 300
mm, 100 kg/m2 for shelves measuring 1000 x 250 mm and 160
kg/m2 for shelves measuring 1000 x 200 mm
▪ Max. load capacity includes the weight of the panel
▪ Max. load capacity with 2 shelf supports
▪ Height adjustment: ± 4 mm
▪ Minimum shelf thickness: 24 mm
▪ Adjustment of shelf tilt
▪ Galvanised steel
97. 97
Titan Shelf Support
Titan 3
▪ Concealed installation behind the shelf
▪ Bolt: 12 mm Ф
▪ Max. load capacity is 50 kg/m2 for shelves measuring 1000 x 300
mm, 100 kg/m2 for shelves measuring 1000 x 250 mm and 160
kg/m2 for shelves measuring 1000 x 200 mm
▪ Max. load capacity includes the weight of the panel
▪ Max. load capacity with 2 shelf supports
▪ Height adjustment: ± 2 mm
▪ Minimum shelf thickness: 19 mm
▪ Adjustment of shelf tilt
▪ Galvanised steel
98. 98
Shelf Supports
Shelf Support
▪ Shelf support mount with tilt compensator
▪ For concealed installation behind the shelf
▪ On walls of corresponding quality and with a maximum
distance of 600 mm between supports, as well as shelf
dimensions of 1000 x 350 mm, the max. load equals 50
kg / m2
▪ Galvanised steel
▪ The material quality and condition of walls are beyond
our control, overlay and attachment. These must be
reconciled with the load capacity.
100. 100
Cabinet Suspension Brackets
SAH 215 with Lift Off Guard
▪ For use on the back of the rear panel
▪ Integrated lift off guard prevents the wall unit from accidentally falling off
the wall
▪ For rail fixing only
▪ Load capacity: 45 kg / each in accordance with EN 15939 in test frame A
▪ Attached to side panel with 3 side pins and screwed down in the rear panel
groove
▪ Suitable for use with rear panel recess of 16 mm and over
▪ Fast, easy height adjustment by means of sturdy adjustment screw and
gear: ± 8 mm
▪ Depth adjustment: 25 mm max.
▪ Side adjustment: ± 3 mm
▪ Adjustment screws are protected from becoming unscrewed accidentally
▪ Lift off height: 7.5 mm
▪ Suitable for use with B type suspension rail
▪ Galvanised steel - fully recyclable
▪ MUST ALWAYS be screwed into the cabinet body side.
101. 101
Cabinet Suspension Brackets
SAH 215
▪ For use on the back of the rear panel
▪ For rail and hook suspension
▪ Load capacity: 45 kg / each in accordance with EN 15939 in test frame A
▪ Attached to side panel with 3 side pins and screwed down in the rear panel
groove
▪ Suitable for use with rear panel recess of 16 mm and over
▪ Fast, easy height adjustment by means of sturdy adjustment screw and
gear: ± 8 mm
▪ Depth adjustment: 25 mm max.
▪ Side adjustment: ± 3 mm for hook suspension
▪ Adjustment screws are protected from becoming unscrewed accidentally
▪ Lift off height: 7.5 mm
▪ Hook suspension: the closed shape of the hook prevents the cabinet from
slipping off and suitable for use with B type suspension rail
▪ Galvanised steel - fully recyclable
▪ MUST ALWAYS be screwed into the cabinet body side.
▪ Optional "lift off guard" function by means of special screw
102. 102
Cabinet Suspension Brackets
SAH 216 with Lift Off Guard
▪ For use on the back of the rear panel
▪ Integrated lift off guard prevents the wall unit from accidentally falling off
the wall
▪ For rail fixing only
▪ Load capacity: 55 kg / each in accordance with EN 15939 in test frame A
▪ Attached to side panel with 3 side pins and screwed down in the rear panel
groove
▪ Suitable for use with rear panel recess of 16 mm and over
▪ Fast, easy height adjustment by means of sturdy adjustment screw and
gear: ± 8 mm
▪ Depth adjustment: 25 mm max.
▪ Side adjustment: ± 3 mm
▪ Adjustment screws are protected from becoming unscrewed accidentally
▪ Lift off height: 7.5 mm
▪ Suitable for use with B type suspension rail
▪ Galvanised steel - fully recyclable
▪ MUST ALWAYS be screwed into the cabinet body side.
103. 103
Cabinet Suspension Brackets
SAH 216
▪ For use on the back of the rear panel
▪ For rail and hook suspension
▪ Load capacity 55 kg each in accordance with EN 15939 in test rack A
▪ Attached to side panel with 3 side pins and screwed down in the rear panel
groove
▪ Suitable for use with rear panel recess of 16 mm and over
▪ Fast, easy height adjustment by means of sturdy adjustment screw and
gear: ± 8 mm
▪ Depth adjustment: 25 mm max.
▪ Side adjustment: ± 3 mm for hook suspension
▪ Adjustment screws are protected from becoming unscrewed accidentally
▪ Lift off height: 7.5 mm
▪ Hook suspension: the closed shape of the hook prevents the cabinet from
slipping off and suitable for use with B type suspension rails
▪ Galvanised steel - fully recyclable
▪ MUST ALWAYS be screwed into the cabinet body side.
▪ Optional "lift off guard" function by means of special screw
104. 104
Cabinet Suspension Brackets
SAH 130
▪ For pressing in
▪ For rail and hook suspension
▪ Guard to prevent slipping off sideways when suspended from a hook
▪ Load capacity 35 kg / each in accordance with EN 15939 in test rack A
▪ 3-dimensional alignment: height ± 7 mm / max. depth 15 mm / laterally
(for hook suspension) ± 3 mm / laterally (for rail suspension) ± 7 mm
▪ Rear panel recess (to front edge of rear panel) at least 16 mm
▪ Lift off height 7.5 mm
▪ Suitable for use with B type and L type suspension rails
▪ Galvanised steel / white plastic
SAH 305
▪ For pressing into 30 mm Ф x 11.5 mm drilling
▪ Rear panel at least 16 mm thick
▪ Load capacity: 15 kg / each in accordance with EN 15939 in test frame A
▪ Lateral alignment ± 8 mm
▪ Suspension with suspension hook Ф 6 x 50 mm
▪ Zinc die-cast, galvanised
105. 105
Cabinet Suspension Brackets
SAH 15
▪ For screwing on and for rail and hook suspension
▪ Guard to prevent slipping off sideways when suspended from a hook
▪ Load capacity 30 kg / each in accordance with EN 15939 in test rack A
▪ 3-dimensional alignment: height-2/+9 mm, depth-2/+18 mm, laterally (for
hook suspension) ± 6 mm / laterally (for rail suspension) ± 7 mm
▪ Rear panel recess (to front edge of rear panel) at least 15 mm
▪ Lift off height 6 mm, Galvanised steel / white plastic
▪ Suitable for use with B type and L type suspension rails
SAH 116
▪ For screwing on and Rail or hook suspension
▪ Guard to prevent slipping off sideways when suspended from a hook
▪ Load capacity 40 kg / each in accordance with EN 15939 in test rack A
▪ 3-dimensional alignment: height ± 7 mm / max. depth 15 mm / laterally
(for hook suspension) ± 3 mm / laterally (for rail suspension) ± 7 mm
▪ Rear panel recess (to front edge of rear panel) at least 16 mm
▪ Lift off height 7.5 mm, Steel nickel plated
▪ Suitable for use with B type and L type suspension rails
106. 106
Cabinet Suspension Brackets – Cover Caps
Cover Caps for SAH 215 / SAH 216
▪ Drilling diameter
▪ Plastic
Cover Caps for SAH 130
▪ Cover caps for SAH 130
▪ For pushing onto the cabinet suspension bracket
▪ Plastic
Cover Caps for SAH 15
▪ For pushing onto the cabinet suspension bracket
▪ Plastic, white / metal nickel plated
107. 107
Spacers
Spacers
▪ For depth compensation in the lower section of the rear
panel
▪ Depth compensation from 15 - 25 mm
▪ Self adhesive for easy installation; can be additionally
secured by screws
▪ Plastic, black
108. 108
Suspension Rails
Suspension Rail, Type L
▪ For cabinet suspension brackets SAH 15, SAH 116, SAH 130
▪ Load capacity 130 kg /cabinet
▪ Attachment: - with special screw, Ф 5.5 x 50 mm, at the level of
each cabinet suspension bracket and use special fixing screws
▪ Snaps off
▪ With oblong holes
▪ Galvanised steel
Universal Suspension Rail, Type B
▪ For cabinet suspension brackets SAH 15, SAH 116, SAH 130,
SAH 215 / 216 and load capacity 150 kg / cabinet
▪ Attachment: - with 2 special screws Ф 5.5 x 50 mm near each
cabinet suspension bracket, an additional special screw Ф 5.5
x 50 must be fitted in the centre behind each cabinet body
over 900 mm wide and use special fixing screws
▪ 3000 mm
▪ With oblong holes
▪ Galvanised steel
109. 109
Fixing Material
Suspension hook ø 6 x 50 mm
▪ Must be screwed into the wall plug to a depth of at least 40 mm
▪ Suitable hook driver to fit cordless screwdriver
▪ Steel, galvanised
Wall plug, ø 8 x 40 mm
▪ For use in solid brick, solid sand-lime brick, concrete or engineering
brick
▪ Commercially available purpose-made fixings must be used for other
wall materials
▪ Plastic, white
Special screw ø 5.5 x 50 mm
▪ For mounting suspension rails
▪ For PZ2 screwdriver
▪ Steel, galvanised
Wall plug, ø 8 x 40 mm
▪ For use in solid brick, solid sand-lime brick, concrete or engineering
brick
▪ Commercially available purpose-made fixings must be used for
other wall materials
▪ Plastic, white