juki smt pick and place machine rs-1,eta agent.for smt pcba,juki pick and place machine,www.smt11.com,www.smt22.com.

1. 1 JUKI SMT Pick and Place Machine RS-1 Products introduction | ETA
www.smt11.com
Full SMT/DIP Solution
JUKI SMT Pick and Place Machine RS-1
■ Class leading speed, up to 42,000 cph
■ 0201*~74mm x 74mm / 50mm x 150mm
■ Wide component range
■ Optimum line balance and highest throughput
■ New head design automatically adjusts the centering height based on components placed.
■ JUKI's laser centering technology is fast, accurate and reliable for a wide range of parts.
Features:
■ No head replacement, newly developed "Parallel 8 nozzle head" with auto-height component recognition sensor
Automatically adjust the component recognition sensor of the mounter head from 1 to 25 mm in 5 stages according to the PCB
requirements. High productivity is achieved without replacing the placement head, even for parts with different heights, from very small
parts to large parts.
■ High placement capacity of 42,000 CPH
The distance between the pickup and placement positions is shortened by adopting the new RF series electric feeder. Additional
improvement is achieved by optimization of the component pickup / mounting operation. This results in a class leading maximum tact time
of 40,000CPH (under optimum conditions).
■ Extensive component compatibility
Components from 0.2 mm × 0.1 mm to 74 mm square, 50 mm × 150 mm, and the height of parts up to 25 mm can be mounted. Component
range and placement speed have been improved by changing the image recognition to four-part simultaneous recognition and using
high-speed motors on the θ (theta) axis of the nozzle. In addition, we adopted a new electric feeder that is smaller, lighter, and thinner.
The feeder capacity has been increased to 112 per RS-1 to improve capability of a single machine solution.
■ Implementation of smart mounting process
Components from 0.2 mm × 0.1 mm to 74 mm square, 50 mm × 150 mm, and the height of parts up to 25 mm can be mounted. Component
range and placement speed have been improved by changing the image recognition to four-part simultaneous recognition and using
high-speed motors on the θ (theta) axis of the nozzle. In addition, we adopted a new electric feeder that is smaller, lighter, and thinner.
The feeder capacity has been increased to 112 per RS-1 to improve capability of a single machine solution.

2. 2 JUKI SMT Pick and Place Machine RS-1 Products introduction | ETA
www.smt11.com
Full SMT/DIP Solution
Parameter:
Fast Smart Modular Mounter RS-1
conveyor specification standard
150mm conveyor extensions,
upstream and downstream
250mm conveyor extensions,
upstream and downstream
Board size
minimum 50×50mm
maximum
1 buffer
650×370mm(Single clamping)
950×370mm
(double clamping)
1,100×370mm
(double clamping)
1,200×370mm
(double clamping)
3 buffers 360×370mm 500×370mm 600×370mm
Component height 25mm
Component size 0201※～□74mm/50×150mm
Placement
speed
Optimum 42,000CPH
IPC9850 29,000CPH
Placement accuracy ±0.035mm（Cpk≧1）
Feeder inputs max.112（Using RF feeders）
Service:
1.Pre-consultation: provides professional SMT solutions for the full line.
2.Factory Warranty: One-year warranty factory service.
3.Installation: On-site installation and commissioning, to ensure smooth production.
4.Technical Training: provides professional training from Level 1 to Level 3.
Thanks for choosing ETA.
ETA looks forward to win-win cooperation.