Polkadot JAM Slides - Token2049 - By Dr. Gavin Wood
Inertia dynamic type slb_sob_specsheet
1. 20
Shaft Mounted Clutches/Power-On Brakes – Type SLB and SOB
The SLB and SOB series are shaft mounted
clutch/power-on brake packages that are used to
couple two parallel or in-line shafts.
The clutch/brake package combines the
features of our model SL or SO with an FB into
one unit for easy installation.
The clutch armature hub accommodates a
pulley, gear, sprocket, etc., to transmit torque to
the second shaft. The brake is used to stop or
hold the load.
The clutch/brake package is shaft mounted
and retained by a loose-fitting pin or bracket
through the anti-rotation tab.
Customer Shall Maintain:
a loose-fitting pin through the
anti-rotation tab to prevent pre-
loading the bearings; initial air
gap setting of .008-.020 inches
on the brake side. On SOB mod-
els concentricity between the
shafts within .005 T.I.R.
SOB
SLB
D
CB
E
I IK
M
N
(2) Set Screws
90° Apart
R
S
Q
P
L
O
H G J
A
Rotor Bore Dia.
Armature Hub Bore Dia.
Clutch Armature & Hub Assembly
Oil Impregnated
Bronze Bearings
Air Gap (Set By Inertia Dynamics)
I
A
B C
D
F
JK
E
GI
Oil Impregnated
Bronze Bearings
Armature Hub Bore Dia.
.020
.005
Air Gap (Set by Customer)
Clutch Armature
& Hub Assembly
Rotor Assembly
Clutch AssemblyBrake Field Assembly
.020
Air Gap .008
(Set by Customer)
Brake Armature
& Hub Assembly
Rotor Bore Dia.
Rotor Assembly
Clutch/Brake Field Assembly
(Set by Customer)
Air Gap
.020
.008
Brake Armature
& Hub Assembly
SLB and SOB
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By: