1. CURRICULUM VITAE
Divyesh.J.Rana
11
+
Yrs Exp. (DME) – Quality Control Department
Mob: +91-9879202820, E-mail id: Divyesh.rana@essar.com
Objective:
• Seeking career as a Quality Control Engineer in an organization which provides me with ample opportunities
and challenges to prove my capabilities.
Professional Summary:
• 11 years & 3 months of experience with Quality control in Machine tools Industry and Heavy Engineering.
Current organization:
• Company Name: Essar Heavy Engineering Services, Hazira
• Company Profile: EHES having facilities of Design, Manufacturing, Repair, Alteration, Erection &
Assembly of heavy engineering equipment, Material handling equipment, Special
Customized equipment and Structural for core business like Steel, Refinery, Power,
Fertilizer & Petrochemicals
• Period: From Oct 2007 to till date
• Designation: Assistant Manager
• Department: QA/QC
• Current location : Surat
• Job type : Permanent
Project Details: Essar Heavy Engineering Services, Hazira
• Refinery equipment
• Steel Plant & Material Handling Equipment
• Hydro power plant equipment
• Steel plant technological structures
• Fabrication, Machining & Assembly of Heavy equipment
• Structural for core business
Roles & Responsibilities:
• Steel Plant & Material Handling and Hydro Power Plant Equipment’s like EOT Cranes, Plate mill Equipment’s,
Pipe Mill Equipment’s, Stator Frames, Air Pre-heater, Coal mill pulverizes and Spiral Casing Etc.
• Static equipment’s of refinery like pressure vessels, heat exchangers, columns, stripper columns.
• Steel plant Technological structures like Beams, Columns, and Girders etc.
Study of Technical specification, Data-sheet & Drawings, preparing specification summary and raising
quarries before start of project.
Inspection Planning:
Preparation of QCP in line with specification & Code requirement and obtain Customer / Client
approval for their Hold, Witness or Surveillance check points.
Page 1 of 5
2. CURRICULUM VITAE
Preparation of seam wise and assembly wise checklist for better tracking job progress.
Raw Material Inspection:
Inspection of Raw material at i.e. plates, pipes, forgings, fittings, fasteners gaskets etc. with respect
to P.O, approved Drawings, Code & standards at shop.
Receive of test certificates as per Code, ARM & approves drawing and preparing MCR (Material
Clearance Records).
In process inspection:
Study and interpretation of drawings and symbols.
WEP set up / fit up and weld visual examination.
Dimensions accuracy as per tolerance sheet & code requirement.
Inspected all Machining components as per Approved drawing, standards and tolerances.
Precision machining inspection of hydro plant equipment’s, Steel plant equipment’s, EOT cranes
equipment’s and Refinery machining equipment’s.
Identifying defects and acceptability’s w.r.t. specification and end use.
Raising Non Conformity Report and resolving the same.
Co-ordination with Customer & Third Party Inspection agencies.
Inspection at Vendor’s Premises:
Inspection of Machined components such as Nonstandard Flanges, Tube sheets, Coupling, frames,
housing, Brake rings for Steel plant equipment’s etc. by using Vernier caliper, Micrometer, Bore
gauges etc.
Visual & Dimensional inspection of D ’end (Hemispherical, Ellipsoidal, Tori spherical etc.) & Tori cones
in single piece as well as in crown – petals construction.
Surface finish verified by using of surface finish comparator/Ra value machine.
Profile of components verified on CMM machine for geometrical features
Non Destructive testing:
Radiographs films review.
Page 2 of 5
3. CURRICULUM VITAE
DPT witness of welds.
MPT witness of welds by Wet and Dry methods.
Ultrasonic thickness measurement of base metal & welds.
Chemical analysis on in-situ condition by portable Alloy analyzer.
Hardness testing of base metal and welds (in-situ by Portable Hardness tester machine).
Heat Treatment:
Confirming completion of all activities before releasing jobs for Heat treatment.
Review & Approval of HTR (Heat treatment Request) with respects to approved Drawing &
code/standards.
Verifying calibration of thermocouples & recorders.
Verifying support arrangement & thermocouple location as per approves HTR before releasing jobs
for Heat treatment.
Review of Heat treatment chart with respects to approved HTR & code/standards.
Visual & aesthetic inspection of job after completion of Heat treatment.
Leak & Pressure test of vessel:
Pneumatic test with low pressure.
Hydrostatic test
Final Inspection
Inspected Visual and dimension.
After verifying all inspected documents release for Final Painting of job
Surface Preparation & Painting Inspection.
Wet & Dry film thickness measurement.
Holiday Test, Adhesion Test carried out as per requirements.
Visual & Aesthetic.
Preparation & submission of final document dossier for manufactured jobs.
Page 3 of 5
4. CURRICULUM VITAE
Previous organization:
• Company Name: Rockwell Structural
• Company Profile: Manufacturer of Heavy equipment of steel plants and refinery.
• Period: From September 2007 to October 2007
• Designation: Engineer
• Department: Quality Control
• Experience: 6 Months
Previous organization:
• Company Name: Batliboi Ltd, Udhna, Surat
• Company Profile: Machine Tools Manufacturing
• Period: From February 2004 to September 2007
• Designation: Sr. Engineer
• Department: Quality Control
• Experience: 6 years
Project Details: Batliboi Ltd, Udhna, Surat
• Radial Drilling machines BVR3/BR5/BR6 & Vo50
• Universal Horizontal/Vertical Milling BF5/BFC 15 / BF3
• Special purpose Drilling machines BPR50
• CNC Turning & Vertical milling machines
Roles & Responsibilities:
• Precision inspection of all Machining parts of CNC Turning Center, Vertical Machining Center, SPM, GPM
machinery.
• Raising Non Conformity Report and resolving the same.
Education Qualification:
• D.M.E. – Dr. S. & S.S. Ghandhy college of Engineering & Technology, Surat
With percentage: 70.39% (distinction) at May 2005.
• S.S.C. - Gujarat Secondary Education Board, Gandhinagar.
With percentage: 78.29 % at March 2000
Additional Qualification:
ASNT as a level II Inspector in LPT,MPT,VT,UT & RT
Working Knowledge of MS Office, Internet, AutoCAD
Strengths:
• Very good learner, self motivated with positive attitude.
• Strong communication and interpersonal skill.
• Result oriented, strong determination and better planning and coordination.
• Enthusiasm to learn new concepts/practices.
• Easily adaptable nature.
• Healthy & Good eyesight.
• Young dynamic & dedicated engineer
Page 4 of 5
5. CURRICULUM VITAE
Personal Details:
• Name: Divyesh kumar Jashvantlal Rana
• Sex: Male
• Date of Birth: 25/08/1985
• Marital Status: Married
• Language knows: Gujarati, English, Hindi
• Passport No.: F 4537648
• Permanent Address 51, Shiv shankar society, Opp.Ramdev nagar,Bhathena
Surat, Pin Code 394210, Gujarat, India
Other Details:
• Current Salary Drawn: Negotiable
• Notice Period: 1 months
Yours truly,
Divyesh Rana
Page 5 of 5
6. CURRICULUM VITAE
Personal Details:
• Name: Divyesh kumar Jashvantlal Rana
• Sex: Male
• Date of Birth: 25/08/1985
• Marital Status: Married
• Language knows: Gujarati, English, Hindi
• Passport No.: F 4537648
• Permanent Address 51, Shiv shankar society, Opp.Ramdev nagar,Bhathena
Surat, Pin Code 394210, Gujarat, India
Other Details:
• Current Salary Drawn: Negotiable
• Notice Period: 1 months
Yours truly,
Divyesh Rana
Page 5 of 5