The document describes how to assemble and use a C43t sewer cleaning nozzle assembly. It explains how to attach various optional accessories like front nozzles, rings, and carriages to customize the assembly for different pipe sizes and applications. Instructions are provided on setup, placement in pipes, and using water pressure to clear blockages.
2. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
1 2 3 4
Add on no: 3 (C38r carriage)
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
30º
PCT/AU2012/000326
thruster
M: 20 09 14
PCT/AU2012/000326
The C43T back-to-back works in any of the 100mm pipe combinations shown below
DIRECT HIT®
over
34 litres
in 100mm
lines
except the red arrows.
can not go down the
red arrows.
can not go down the
red arrows.
3. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
1 2 3 4
Add on no: 3 (C38r carriage)
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
30º
PCT/AU2012/000326
thruster
M: 20 09 14
PCT/AU2012/000326
C43T in 100mm lines (cut with front turbo nozzle)
YES
Cut
tree roots
FAST
C43T in 100 mm lines (what can it go through, around, up or down)
YES YES YES YES YES YES YES
YES
80 mm
using
03 Hose
90 mm
using
03 Hose
100 mm using
03 or 04 Hose
100 mm
using
03 or 04 Hose
100 mm using
03 or 04 Hose
100 mm
using
03 or 04 Hose
100 mm
using
03 or 04 Hose
50 mm
Min Access
No 50 mm Bend
150 mm
using
03 or 04 Hose
Clean
drain
walls
Unblock
grease,
soap
etc.
Remove
sand
from
lines &
grates
Harden
deposits,
lime,
cement
etc.
Ice
in
drains
Adjust
assembly
to suit
100, 150 &
225 lines
Clean
manholes,
shafts, pits
& hydro
excavate
Penetrate, cut, clean and adjust assembly front turbo nozzle only
YES
YES
YES YES YES YES YES YES YES
Penetrate
tree roots
FAST
NO
4. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
1 2 3 4
Add on no: 3 (C38r carriage)
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
30º
PCT/AU2012/000326
thruster
M: 20 09 14
PCT/AU2012/000326
The C43T back-to-back works in any of the150mm pipe combinations shown below
DIRECT HIT®
over
34 litres
in 150mm
lines
5. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
1 2 3 4
Add on no: 3 (C38r carriage)
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
30º
PCT/AU2012/000326
thruster
M: 20 09 14
PCT/AU2012/000326
C43T in 150mm lines (cut with front turbo nozzle)
Clean
manholes,
shafts, pits
& hydro
excavate
YES
Clean
drain
walls
Unblock
grease,
soap
etc.
Remove
sand
from
lines &
grates
Harden
deposits,
lime,
cement
etc.
Ice
in
drains
Adjust
assembly
to suit
100, 150 &
225 lines
Cut
tree roots
FAST
YES YES YES YES YES YES YES
Penetrate, cut, clean and adjust assembly front turbo nozzle only
Penetrate
tree roots
FAST
YES
YES
C43T in 150 mm lines (what can it go through, around, up or down)
80 mm
using
03 Hose
90 mm
using
03 Hose
100 mm using
03 or 04 Hose
100 mm
using
03 or 04 Hose
150 mm using
03 or 04 Hose
100 mm
using
03 or 04 Hose
100 mm
using
03 or 04 Hose
50 mm
Min Access
No 50 mm Bend
150 mm
using
03 or 04 Hose
YES YES YES YES YES YES YES YES YES
7. C43t Starter Kit Add on no: 1 (Cap Kit)
Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
From your C43t Starter Kit take your carriage PCT/AU2012/000326 PCT/AU2012/000326
Front view
1 2 3 4
Add on no: 3 (C38r carriage)
Side view Back view
Note: the C43 carriage has a oring on each side
100 MM 150 MM 225 MM
24º
30º
30º
thruster
PCT/AU2012/000326
8. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Add your swivel
PPCCTT//AAUU22001122//000000332266
1 2 3 4
Add on no: 3 (C38r carriage)
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
30º
thruster
PCT/AU2012/000326
9. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
From your C43t Starter Kit take the front nozzle
30º
PPCCTT//AAUU22001122//000000332266
1 2 3 4
Add on no: 3 (C38r carriage)
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
thruster
PCT/AU2012/000326
10. C43t Starter Kit Add on no: 1 (Cap Kit)
Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
From your C43t Starter Kit take the thruster
PPCCTT//AAUU22001122//000000332266
1 2 3 4
thruster
30º
Add on no: 3 (C38r carriage)
Front view Back view
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
11. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
From your C43t Starter Kit take the back nozzle
PPCCTT//AAUU22001122//000000332266
1 2 3 4
thruster
30º
30º
Add on no: 3 (C38r carriage)
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
PCT/AU2012/000326
12. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
PPCCTT//AAUU22001122//000000332266
thruster
Connect carriage with thruster
30º
1 2 3 4
30º
Add on no: 3 (C38r carriage)
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
PCT/AU2012/000326
13. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
1 2 3 4
Add on no: 3 (C38r carriage)
Screw on the nozzles with spanners provided in the Starter Kit
30º
PPCCTT//AAUU22001122//000000332266
thruster
30º
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
PCT/AU2012/000326
14. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
1 2 3 4
Add on no: 3 (C38r carriage)
Screw on the nozzles with spanners provided in the Starter Kit
30º
PPCCTT//AAUU22001122//000000332266
thruster
30º
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
PCT/AU2012/000326
15. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Connect your hose
30º
PPCCTT//AAUU22001122//000000332266
thruster
1 2 3 4
Add on no: 3 (C38r carriage)
30º
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
PCT/AU2012/000326
16. C43t Starter Kit Add on no: 1 (Cap Kit)
Add on no: 2 (24º Front Nozzle) Add on no: 3 (Rings)
Place assembly in the minimum 100 mm pipe
30º
thruster
PCT/AU2012/000326
1 2 3 4
30º
PCT/AU2012/000326
side view
100 MM 150 MM 225 MM
24º
4 24º
Add on no: 3 (C38r carriage)
17. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Turn the water on
30º
thruster
PCT/AU2012/000326
1 2 3 4
Add on no: 3 (C38r carriage)
30º
side view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
PCT/AU2012/000326
18. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Turn the water off
30º
thruster
PCT/AU2012/000326
1 2 3 4
Add on no: 3 (C38r carriage)
30º
side view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
PCT/AU2012/000326
19. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Remove assembly from the pipe
30º
PPCCTT//AAUU22001122//000000332266
thruster
1 2 3 4
Add on no: 3 (C38r carriage)
30º
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
PCT/AU2012/000326
20. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
1 2 3 4
Add on no: 3 (C38r carriage)
Add the ring so you can cut roots higher or go over a dislodged pipe
30º
PPCCTT//AAUU22001122//000000332266
thruster
100 MM
30º
top view
Add on no: 1 (Cap Kit)
150 MM 225 MM
24º
PCT/AU2012/000326
21. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
With circlip pliers add circlip one
30º
PPCCTT//AAUU22001122//000000332266
thruster
1 2 3 4
Add on no: 3 (C38r carriage)
30º
top view
Add on no: 1 (Cap Kit)
150 MM 225 MM
24º
PCT/AU2012/000326
22. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Add the ring
30º
PPCCTT//AAUU22001122//000000332266
thruster
1 2 3 4
Add on no: 3 (C38r carriage)
30º
top view
Add on no: 1 (Cap Kit)
150 MM 225 MM
24º
PCT/AU2012/000326
23. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
With circlip pliers add circlip two
30º
PPCCTT//AAUU22001122//000000332266
thruster
1 2 3 4
Add on no: 3 (C38r carriage)
30º
top view
Add on no: 1 (Cap Kit)
150 MM 225 MM
24º
PCT/AU2012/000326
24. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Place the assembly in the pipe
30º
thruster
PCT/AU2012/000326
1 2 3 4
Add on no: 3 (C38r carriage)
30º
side view
Add on no: 1 (Cap Kit)
150 MM 225 MM
24º
PCT/AU2012/000326
25. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Turn the water on
30º
thruster
PCT/AU2012/000326
1 2 3 4
Add on no: 3 (C38r carriage)
30º
side view
Add on no: 1 (Cap Kit)
150 MM 225 MM
24º
PCT/AU2012/000326
26. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Go over displaced pipe
30º
thruster
PCT/AU2012/000326
1 2 3 4
Add on no: 3 (C38r carriage)
30º
side view
Add on no: 1 (Cap Kit)
150 MM 225 MM
24º
PCT/AU2012/000326
27. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Turn the water off and remove assembly from the pipe
30º
thruster
PCT/AU2012/000326
1 2 3 4
Add on no: 3 (C38r carriage)
30º
side view
Add on no: 1 (Cap Kit)
150 MM 225 MM
24º
PCT/AU2012/000326
28. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
30º
PPCCTT//AAUU22001122//000000332266
thruster
1 2 3 4
Add on no: 3 (C38r carriage)
30º
top view
Add on no: 1 (Cap Kit)
150 MM 225 MM
24º
PCT/AU2012/000326
Remove the ring and circlips
29. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
30º
PPCCTT//AAUU22001122//000000332266
thruster
1 2 3 4
Add on no: 3 (C38r carriage)
30º
top view
Add on no: 1 (Cap Kit)
150 MM 225 MM
24º
PCT/AU2012/000326
Remove the ring and circlips
30. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
30º
PPCCTT//AAUU22001122//000000332266
thruster
1 2 3 4
Add on no: 3 (C38r carriage)
30º
top view
Add on no: 1 (Cap Kit)
150 MM 225 MM
24º
PCT/AU2012/000326
Remove the ring and circlips
31. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Remove the ring and circlips
30º
PPCCTT//AAUU22001122//000000332266
thruster
1 2 3 4
Add on no: 3 (C38r carriage)
30º
top view
Add on no: 1 (Cap Kit)
150 MM 225 MM
24º
PCT/AU2012/000326
32. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
30º
PPCCTT//AAUU22001122//000000332266
thruster
1 2 3 4
Add on no: 3 (C38r carriage)
30º
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
PCT/AU2012/000326
33. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Un screw the front nozzle
PPCCTT//AAUU22001122//000000332266
thruster
30º
1 2 3 4
Add on no: 3 (C38r carriage)
30º
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
PCT/AU2012/000326
34. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
PPCCTT//AAUU22001122//000000332266
thruster
1 2 3 4
Add on no: 3 (C38r carriage)
30º
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
35. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
1 2 3 4
Add on no: 3 (C38r carriage)
From your add on no: 2 take your 24º front nozzle to cut very extreme root
PPCCTT//AAUU22001122//000000332266
thruster
24º
30º
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
30º
PCT/AU2012/000326
36. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
1 2 3 4
Add on no: 3 (C38r carriage)
Screw on the front nozzle with spanners provided in the starter kit
24º
PPCCTT//AAUU22001122//000000332266
thruster
30º
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
30º
PCT/AU2012/000326
37. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Place assembly in the pipe
24º
thruster
PCT/AU2012/000326
1 2 3 4
Add on no: 3 (C38r carriage)
30º
side view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
30º
PCT/AU2012/000326
38. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Turn the water on
24º
thruster
PCT/AU2012/000326
1 2 3 4
Add on no: 3 (C38r carriage)
30º
side view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
30º
PCT/AU2012/000326
39. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Turn the water off
24º
thruster
PCT/AU2012/000326
1 2 3 4
Add on no: 3 (C38r carriage)
30º
side view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
30º
PCT/AU2012/000326
40. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Remove assembly from the pipe
24º
PPCCTT//AAUU22001122//000000332266
thruster
1 2 3 4
Add on no: 3 (C38r carriage)
30º
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
30º
PCT/AU2012/000326
41. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
24º
PPCCTT//AAUU22001122//000000332266
thruster
1 2 3 4
Add on no: 3 (C38r carriage)
30º
Un screw the hose from the swivel
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
30º
PCT/AU2012/000326
42. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Connect the safety pipe assembly
24º
PPCCTT//AAUU22001122//000000332266
thruster
1 2 3 4
Add on no: 3 (C38r carriage)
30º
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
30º
PCT/AU2012/000326
43. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
24º
PPCCTT//AAUU22001122//000000332266
thruster
1 2 3 4
Add on no: 3 (C38r carriage)
30º
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
30º
PCT/AU2012/000326
44. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Place the assembly in the pipe
24º
PPCCTT//AAUU22001122//000000332266
thruster
1 2 3 4
Add on no: 3 (C38r carriage)
30º
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
30º
PCT/AU2012/000326
45. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Turn the water on
PPCCTT//AAUU22001122//000000332266
thruster
1 2 3 4
Add on no: 3 (C38r carriage)
30º
24º
30º
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
30º
PCT/AU2012/000326
46. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Turn the water off
PPCCTT//AAUU22001122//000000332266
thruster
1 2 3 4
Add on no: 3 (C38r carriage)
30º
24º
30º
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
30º
PCT/AU2012/000326
47. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Remove assembly from the pipe
24º
PPCCTT//AAUU22001122//000000332266
thruster
1 2 3 4
Add on no: 3 (C38r carriage)
30º
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
30º
PCT/AU2012/000326
48. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Un screw the front nozzle
PPCCTT//AAUU22001122//000000332266
thruster
24º
1 2 3 4
Add on no: 3 (C38r carriage)
30º
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
30º
PCT/AU2012/000326
49. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
PPCCTT//AAUU22001122//000000332266
thruster
1 2 3 4
Add on no: 3 (C38r carriage)
30º
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
50. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
1 2 3 4
Add on no: 3 (C38r carriage)
Take the cap from your Cap kit this will allow you to go further into the line
PPCCTT//AAUU22001122//000000332266
thruster
30º
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
51. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
PPCCTT//AAUU22001122//000000332266
thruster
1 2 3 4
Add on no: 3 (C38r carriage)
30º
Screw them together with spanners provided in the starter kit
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
52. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Place assembly in the pipe
thruster
PCT/AU2012/000326
1 2 3 4
Add on no: 3 (C38r carriage)
30º
side view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
53. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Turn the water on
thruster
PCT/AU2012/000326
1 2 3 4
Add on no: 3 (C38r carriage)
30º
side view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
54. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Turn the water off
thruster
PCT/AU2012/000326
1 2 3 4
Add on no: 3 (C38r carriage)
30º
side view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
55. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Remove assembly from the pipe
PPCCTT//AAUU22001122//000000332266
thruster
1 2 3 4
Add on no: 3 (C38r carriage)
30º
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
56. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Remove cap from assembly
PPCCTT//AAUU22001122//000000332266
thruster
1 2 3 4
Add on no: 3 (C38r carriage)
30º
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
57. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Remove back nozzle
PPCCTT//AAUU22001122//000000332266
thruster
1 2 3 4
30º
Add on no: 3 (C38r carriage)
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
58. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Remove the truster
PPCCTT//AAUU22001122//000000332266
1 2 3 4
thruster
Add on no: 3 (C38r carriage)
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
30º
PCT/AU2012/000326
59. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Remove the C38 carriage from safety pipe
PPCCTT//AAUU22001122//000000332266
1 2 3 4
Add on no: 3 (C38r carriage)
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
30º
thruster
PCT/AU2012/000326
60. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
PPCCTT//AAUU22001122//000000332266
1 2 3 4
Add on no: 3 (C38r carriage)
top view
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
30º
thruster
PCT/AU2012/000326
Put the carriage back into your starter kit
61. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
1 2 3 4
Add on no: 3 (C38r carriage)
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
30º
PCT/AU2012/000326
thruster
PCT/AU2012/000326
Take your C38r carriage
62. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Add on no: 3 (C38r carriage)
PCT/AU2012/000326
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
30º
PCT/AU2012/000326
thruster
1 2 3 4
top view
63. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Add your swivel
1 2 3 4
Add on no: 3 (C38r carriage)
PCT/AU2012/000326
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
30º
PCT/AU2012/000326
thruster
PCT/AU2012/000326
top view
64. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
1 2 3 4
PCT/AU2012/000326
From your C38 Starter Kit take the front nozzle
30º
Add on no: 3 (C38r carriage)
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
thruster
PCT/AU2012/000326
top view
65. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Screw them together with spanners provided in the Starter Kit
30º
PCT/AU2012/000326
Add on no: 3 (C38r carriage)
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
thruster
1 2 3 4
top view
66. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Connect your hose or safety pipe
30º
PCT/AU2012/000326
Add on no: 3 (C38r carriage)
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
thruster
1 2 3 4
top view
67. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Place assembly in the pipe
30º
PCT/AU2012/000326
Add on no: 3 (C38r carriage)
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
thruster
1 2 3 4
side view
68. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Turn the water on
30º
PCT/AU2012/000326
Add on no: 3 (C38r carriage)
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
thruster
1 2 3 4
side view
69. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
30º
PCT/AU2012/000326
Turn the water off
Add on no: 3 (C38r carriage)
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
thruster
1 2 3 4
PCT/AU2012/000326
side view
70. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
30º
PCT/AU2012/000326
Remove assembly from the pipe
Add on no: 3 (C38r carriage)
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
thruster
1 2 3 4
top view
71. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
30º
PCT/AU2012/000326
Remove the safety pipe
Add on no: 3 (C38r carriage)
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
thruster
1 2 3 4
top view
72. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
30º
PCT/AU2012/000326
Remove the safety pipe
Add on no: 3 (C38r carriage)
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
thruster
1 2 3 4
top view
Connect your hose
73. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
30º
PCT/AU2012/000326
Remove the safety pipe
Add on no: 3 (C38r carriage)
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
thruster
1 2 3 4
top view
Insert C38r into a 50 mm pipe
74. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Add on no: 3 (C38r carriage)
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
thruster
1 2 3 4
30º
Going through 50mm PVC pipe
75. C43t Starter Kit Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
Add on no: 3 (C38r carriage)
Add on no: 1 (Cap Kit)
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
thruster
1 2 3 4
PCT/AU2012/000326
30º
Going down into the blockage
76. C43t Starter Kit Add on no: 1 (Cap Kit) Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
thruster
1 2 3 4
PCT/AU2012/000326
77. C43t Starter Kit Add on no: 1 (Cap Kit) Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
thruster
1 2 3 4
Turn the water on
78. C43t Starter Kit Add on no: 1 (Cap Kit) Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
thruster
1 2 3 4
Send down and unblock the drain
79. C43t Starter Kit Add on no: 1 (Cap Kit) Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
thruster
1 2 3 4
Turn the water off
80. C43t Starter Kit Add on no: 1 (Cap Kit) Add on no: 2 (24º Front Nozzle) Add on no: 4 (Rings)
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
thruster
1 2 3 4
PCT/AU2012/000326
30º
Remove assembly from the pipe