SlideShare a Scribd company logo

Direct Hit DC43t Sewer Nozzle and Drain Clearing Assembly - How It Works

•
•
D
DirectHitNozzles
Self Improvement
1 of 79
Download to read offline
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Rings How to build your custom DC43T Starter Kit assembly and then add to it © Copyright Jim Paris 2013 PCT/AU2012/000326 Back 30° 100 MM 150 MM 225 MM 30º 30º 24º thruster DIRECT HIT® www.DirectHitSewerNozzles.com M: 23 09 14
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Rings The DC43T back-to-back works in any of the 100mm pipe combinations shown below © Copyright Jim Paris 2013 PCT/AU2012/000326 Back 30° 100 MM 150 MM 225 MM 30º 30º 24º thruster DIRECT HIT® over 34 litres in 100mm lines except the red arrows. can not go down the red arrows. can not go down the red arrows. DC43T back-to-back 30º thruster 30º front 30º and back 30° L/S:12/03/14
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Rings © Copyright Jim Paris 2013 PCT/AU2012/000326 Back 30° 100 MM 150 MM 225 MM 30º 30º 24º thruster The DC43T back-to-back works in any of the 150 mm pipe combinations shown below L/S:12/03/14 DIRECT HIT® over 34 litres in 150mm lines thruster DC43T back-to-back 30º 30º front 30º and back 30°
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Rings DC43T back-to-back (front and back revere turbo nozzles) DC43T back-to-back in 100 mm lines (what can it go through, around, up or down) © Copyright Jim Paris 2013 PCT/AU2012/000326 Back 30° 100 MM 150 MM 225 MM 30º 30º 24º thruster Clean drain walls Unblock grease, soap etc. Remove sand from lines & grates Harden deposits, lime, cement etc. Ice in drains Cut dead or alive tree roots FAST Penetrate dead or alive tree roots FAST Adjust assembly to suit 100, 150 & 225 lines Clean manholes, shafts, pits & hydro excavate YES YES YES YES YES YES YES YES YES NO NO NO NO YES YES YES YES YES 80 mm using 03 Hose 90 mm using 03 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 50 mm Min Access No 50 mm Bend 150 mm using 03 or 04 Hose
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings The DC43T carriage. PCT/AU2012/000326 Front view Side view Back view Note: the DC43T carriage has a oring on each side 100 MM 150 MM 225 MM 30º 30º 24º thruster PCT/AU2012/000326
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings Front view Back view Take the thruster 100 MM 150 MM 225 MM 30º 30º 24º PCT/AU2012/000326 thruster
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings Take your back nozzle thruster 100 MM 150 MM 225 MM 30º 30º 24º PCT/AU2012/000326 Top view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings Screw onto the thruster the turbo nozzle thruster 30º 100 MM 150 MM 225 MM PCT/AU2012/000326 30º 24º Top view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings Connect the thruster with the carriage thruster PCT/AU2012/000326 30º 100 MM 150 MM 225 MM 30º 24º Top view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings thruster Take the 30 degree front nozzle PCT/AU2012/000326 30º 30º 100 MM 150 MM 225 MM 24º Top view
DC43T Carriage 30º Thruster Front 30° Front 24° Ring 30º Cap Back 30° Rings thruster Screw and tighten up the front nozzle through the carriage into the thruster PCT/AU2012/000326 24º 100 MM 150 MM 225 MM Top view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º thruster PCT/AU2012/000326 30º Connect you carriage to the jetter hose 100 MM 150 MM 225 MM 24º Top view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º 30º 30º thruster Place assembly in the pipe Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º 30º thruster Turn the water on 100 MM 150 MM 225 MM 24º Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings How the assembly works in 100 pipe and 150 mm pipes 420mm 150mm 420mm 230mm 100mm 230mm cut cut & thrust assembly travelling this way 100 MM 150 MM 225 MM 24º Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º How does the DC43t with its 30º front & back turbo nozzle work in 100-150mm with no rings 420mm 150mm 230mm cut 24º © Copyright Jim Paris 2013 100mm DC43t traveling this way hits the blockage 24º tree root blockage cut & thrust 80mm Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º © Copyright Jim Paris 2013 150mm 100mm 80mm go back and forward 80mm 24º tree root blockage cut 24º How does the DC43t with its 30º front & back turbo nozzle work in 100-150mm with no rings Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º How does the DC43t with its 30º front & back turbo nozzle work in 100-150mm with no rings cut 24º cut & thrust © Copyright Jim Paris 2013 150mm 100mm DC43t is through the blockage 24º tree root blockage 80mm Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º How does the DC43t with its 30º front & back turbo nozzle work in 100-150mm with no rings © Copyright Jim Paris 2013 150mm 24º tree root blockage cut & thrust 24º 100mm DC43t is cutting through the blockage Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º How does the DC43t with its 30º front & back turbo nozzle work in 100-150mm with no rings © Copyright Jim Paris 2013 150mm 100mm cut & thrust DC43t is cutting through the blockage Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º How does the DC43t with its 30º front & back turbo nozzle work in 100-150mm with no rings © Copyright Jim Paris 2013 150mm 100mm cut & thrust DC43t has cut the root blockage Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º 30º thruster Turn the water off 100 MM 150 MM 225 MM 24º Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º thruster PCT/AU2012/000326 30º Remove assembly from the pipe 100 MM 150 MM 225 MM 24º Top view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º thruster PCT/AU2012/000326 30º Remove front 30 degree turbo nozzle 100 MM 150 MM 225 MM 24º Top view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings thruster PCT/AU2012/000326 30º Take the Ring Cap 100 MM 150 MM 225 MM 24º 30º Top view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings Screw and tighten up the Ring Cap through the carriage into the thruster thruster PCT/AU2012/000326 30º 100 MM 150 MM 225 MM 30º 24º Top view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings thruster PCT/AU2012/000326 30º Place assembly in the pipe 100 MM 150 MM 225 MM 30º 24º Top view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 24º Turn the water on 30º thruster Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º thruster 100 MM 150 MM 225 MM 30º 24º With the ring cap on it will give you more thrust to send your assembly further Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings How the assembly works in 100 pipe and 150 mm pipes 150mm 420mm 100mm 230mm cut cut & thrust assembly traveling this way with 100% back cutting power 100 MM 150 MM 225 MM 30º 24º Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º thruster Turn the water off 100 MM 150 MM 225 MM 30º 24º Side view
30º DC43T Carriage Rings Ring Cap Front 30° Front 24° Thruster Back 30° PCT/AU2012/000326 thruster Remove assembly from the pipe 30º 24º 100 MM 150 MM 225 MM Top view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings thruster PCT/AU2012/000326 30º Remove the ring cap 100 MM 150 MM 225 MM 30º 24º Top view
30º DC43T Carriage Rings Ring Cap Front 30° Front 24° Thruster Back 30° PCT/AU2012/000326 thruster Take the 30 degree front nozzle 30º 24º 100 MM 150 MM 225 MM Top view
DC43T 30º Carriage Thruster Front 30° Front 24° Ring 30º Cap Back 30° Rings PCT/AU2012/000326 thruster Screw and tighten up the Ring Cap through the carriage into the thruster 24º 100 MM 150 MM 225 MM Top view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º thruster PCT/AU2012/000326 30º Take the 100 mm Ring 100 MM 150 MM 225 MM 24º Top view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º thruster PCT/AU2012/000326 30º Add the ring to the front nozzle 100 MM 150 MM 225 MM 24º Top view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º thruster PCT/AU2012/000326 30º Add the cir clip 150 MM 225 MM 24º Top view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º thruster PCT/AU2012/000326 30º Add the ring 150 MM 225 MM 24º Top view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º thruster PCT/AU2012/000326 30º Add the cir clip 150 MM 225 MM 24º Top view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º 30º thruster Place assembly in the pipe 150 MM 225 MM 24º Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º 30º thruster Turn the water on 150 MM 225 MM 24º Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings How do rings work in 150 mm pipes 290mm 150mm front cut cut & thrust assembly traveling this way you will have from 20 to 40% front cutting power 150 MM 225 MM 24º Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º 30º thruster Turn the water off 150 MM 225 MM 24º Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º thruster PCT/AU2012/000326 30º Remove assembly from the pipe 150 MM 225 MM 24º Top view
Remove ring from front nozzle and install it to the back nozzle DC43T Carriage 30º Thruster Front 30° Front 24° Ring 30º Cap Back 30° Rings PCT/AU2012/000326 thruster 24º 150 MM 225 MM Top view
DC43T Carriage 30º Thruster Front 30° Front 24° Ring 30º Cap Back 30° Rings PCT/AU2012/000326 thruster 24º 150 MM 225 MM Top view
DC43T Carriage 30º Thruster Front 30° Front 24° Ring 30º Cap Back 30° Rings PCT/AU2012/000326 thruster 24º 150 MM 225 MM Top view
DC43T Carriage 30º Thruster Front 30° Front 24° Ring 30º Cap Back 30° Rings PCT/AU2012/000326 thruster 24º 150 MM 225 MM Top view
DC43T Carriage 30º Thruster Front 30° Front 24° Ring 30º Cap Back 30° Rings PCT/AU2012/000326 thruster 24º 150 MM 225 MM Top view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º thruster PCT/AU2012/000326 30º Place assembly in the pipe 150 MM 225 MM 24º Top view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º 30º thruster Turn the water on 150 MM 225 MM 24º Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º 30º thruster 150 MM 225 MM 24º Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings How do rings work in 150 mm pipes with a ring cap 150mm 290mm front cut cut & thrust assembly traveling this way you will have from 60 to 80% back cutting power 150 MM 225 MM 24º Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º 30º thruster Turn the water off 150 MM 225 MM 24º Side view
DC43T Carriage 30º Thruster Front 30° Front 24° Ring 30º Cap Back 30° Rings PCT/AU2012/000326 thruster Remove assembly from the pipe 24º 150 MM 225 MM Top view
DC43T 30º Carriage Thruster Front 30° Front 24° Ring 30º Cap Back 30° Rings PCT/AU2012/000326 thruster Remove front nozzle 24º 150 MM 225 MM Top view
30º DC43T Carriage Rings Ring Cap Front 30° Front 24° Thruster Back 30° PCT/AU2012/000326 thruster Take the Ring Cap 30º 24º 150 MM 225 MM Top view
30º DC43T Carriage Rings Ring Cap Front 30° Front 24° Thruster Back 30° PCT/AU2012/000326 thruster Screw in the ring cap trough the carriage into the truster with your ring spanner 30º 24º 150 MM 225 MM Top view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º thruster PCT/AU2012/000326 30º Place assembly in the pipe Top view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º 30º thruster Turn the water on Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 225 MM 24º 150 MM 30º 30º thruster Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings How do rings work in 150 mm pipes with a ring cap 150mm 290mm front cut cut & thrust assembly traveling this way you will have 100% back cutting power 150 MM 225 MM 24º 30º Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 225 MM 24º 150 MM 30º 30º thruster Turn the water off Side view
30º DC43T Carriage Rings Ring Cap Front 30° Front 24° Thruster Back 30° PCT/AU2012/000326 thruster Remove assembly from the pipe 30º 24º 150 MM 225 MM Top view
30º DC43T Carriage Rings Ring Cap Front 30° Front 24° Thruster Back 30° PCT/AU2012/000326 thruster Remove ring from back nozzle 30º 24º 150 MM 225 MM Top view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º thruster PCT/AU2012/000326 30º Top view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º thruster PCT/AU2012/000326 30º Top view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º 30º thruster PCT/AU2012/000326 30º Remove Ring Cap Top view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º 30º thruster PCT/AU2012/000326 30º Top view
30º DC43T Carriage Rings Ring Cap Front 30° Front 24° Thruster Back 30° PCT/AU2012/000326 thruster Take the 24 degree front nozzle 30º 24º 100 MM 150 MM 225 MM Top view
DC43T 24º Carriage Thruster Front 30° Front 24° Ring 30º Cap Back 30° Rings PCT/AU2012/000326 thruster Screw and tighten up the front nozzle through the carriage into the thruster 30º 100 MM 150 MM 225 MM Top view
DC43T Carriage 24º Thruster Front 30° Front 24° Ring 30º Cap Back 30° Rings PCT/AU2012/000326 thruster Place assembly in the pipe 30º 100 MM 150 MM 225 MM Top view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 24º Place assembly in the pipe 30º thruster Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings Turn the water on 2244º 30º thruster 100 MM 150 MM 225 MM 30º Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º How the assembly works in 100 pipe and 150 mm pipes 630mm 150mm 420mm 380mm 100mm 230mm better* penetration cut cut & thrust 100 MM 150 MM 225 MM assembly traveling this way with 24 degree front will have better* penetration power Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 2244º 30º thruster Turn the water off 100 MM 150 MM 225 MM 30º Side view
DC43T Carriage Thruster Front 30° Front 24° Ring Cap Rings 24º thruster PCT/AU2012/000326 30º THE END Back 30° Remove assembly from the pipe 100 MM 150 MM 225 MM 30º Top view
DIRECT HIT® © Copyright Jim Paris 2013 M: 23 09 14 www.DirectHitSewerNozzles.com

Recommended

Extreme Big Cutter (DC43) for 150 mm to 300 mm (6-12") lines
Extreme Big Cutter (DC43) for 150 mm to 300 mm (6-12") linesExtreme Big Cutter (DC43) for 150 mm to 300 mm (6-12") lines
Extreme Big Cutter (DC43) for 150 mm to 300 mm (6-12") lines
DirectHitNozzles
 
Drect Hit DC43 Sewer Nozzle Assembly - How It Works
Drect Hit DC43 Sewer Nozzle Assembly - How It WorksDrect Hit DC43 Sewer Nozzle Assembly - How It Works
Drect Hit DC43 Sewer Nozzle Assembly - How It Works
DirectHitNozzles
 
Direct Hit Extreme (Short) Penetrator (C38rs)
Direct Hit Extreme (Short) Penetrator (C38rs) Direct Hit Extreme (Short) Penetrator (C38rs)
Direct Hit Extreme (Short) Penetrator (C38rs)
DirectHitNozzles
 
C43rs the all purpose (short) penetrator
C43rs the all purpose (short) penetratorC43rs the all purpose (short) penetrator
C43rs the all purpose (short) penetrator
DirectHitNozzles
 
Extreme Long Penetrator (C38r) Sewer Nozzle Assembly
Extreme Long Penetrator (C38r) Sewer Nozzle AssemblyExtreme Long Penetrator (C38r) Sewer Nozzle Assembly
Extreme Long Penetrator (C38r) Sewer Nozzle Assembly
DirectHitNozzles
 
Speciality Long Penetrator (C43r) - Forward Clearing Of Blocked Drains
Speciality Long Penetrator (C43r) - Forward Clearing Of Blocked DrainsSpeciality Long Penetrator (C43r) - Forward Clearing Of Blocked Drains
Speciality Long Penetrator (C43r) - Forward Clearing Of Blocked Drains
DirectHitNozzles
 
Cutting Turbo Nozzle for 100 mm to 300 mm (4-12") lines (DC38)
Cutting Turbo Nozzle for 100 mm to 300 mm (4-12") lines (DC38)Cutting Turbo Nozzle for 100 mm to 300 mm (4-12") lines (DC38)
Cutting Turbo Nozzle for 100 mm to 300 mm (4-12") lines (DC38)
DirectHitNozzles
 
C43t Sewer Nozzle Assembly
C43t Sewer Nozzle AssemblyC43t Sewer Nozzle Assembly
C43t Sewer Nozzle Assembly
DirectHitNozzles
 

Recommended

Extreme Big Cutter (DC43) for 150 mm to 300 mm (6-12") lines
Extreme Big Cutter (DC43) for 150 mm to 300 mm (6-12") linesExtreme Big Cutter (DC43) for 150 mm to 300 mm (6-12") lines
Extreme Big Cutter (DC43) for 150 mm to 300 mm (6-12") lines
DirectHitNozzles
 
Drect Hit DC43 Sewer Nozzle Assembly - How It Works
Drect Hit DC43 Sewer Nozzle Assembly - How It WorksDrect Hit DC43 Sewer Nozzle Assembly - How It Works
Drect Hit DC43 Sewer Nozzle Assembly - How It Works
DirectHitNozzles
 
Direct Hit Extreme (Short) Penetrator (C38rs)
Direct Hit Extreme (Short) Penetrator (C38rs) Direct Hit Extreme (Short) Penetrator (C38rs)
Direct Hit Extreme (Short) Penetrator (C38rs)
DirectHitNozzles
 
C43rs the all purpose (short) penetrator
C43rs the all purpose (short) penetratorC43rs the all purpose (short) penetrator
C43rs the all purpose (short) penetrator
DirectHitNozzles
 
Extreme Long Penetrator (C38r) Sewer Nozzle Assembly
Extreme Long Penetrator (C38r) Sewer Nozzle AssemblyExtreme Long Penetrator (C38r) Sewer Nozzle Assembly
Extreme Long Penetrator (C38r) Sewer Nozzle Assembly
DirectHitNozzles
 
Speciality Long Penetrator (C43r) - Forward Clearing Of Blocked Drains
Speciality Long Penetrator (C43r) - Forward Clearing Of Blocked DrainsSpeciality Long Penetrator (C43r) - Forward Clearing Of Blocked Drains
Speciality Long Penetrator (C43r) - Forward Clearing Of Blocked Drains
DirectHitNozzles
 
Cutting Turbo Nozzle for 100 mm to 300 mm (4-12") lines (DC38)
Cutting Turbo Nozzle for 100 mm to 300 mm (4-12") lines (DC38)Cutting Turbo Nozzle for 100 mm to 300 mm (4-12") lines (DC38)
Cutting Turbo Nozzle for 100 mm to 300 mm (4-12") lines (DC38)
DirectHitNozzles
 
C43t Sewer Nozzle Assembly
C43t Sewer Nozzle AssemblyC43t Sewer Nozzle Assembly
C43t Sewer Nozzle Assembly
DirectHitNozzles
 
Direct Hit DC38 Sewer Nozzle Assembly
Direct Hit DC38 Sewer Nozzle Assembly Direct Hit DC38 Sewer Nozzle Assembly
Direct Hit DC38 Sewer Nozzle Assembly
DirectHitNozzles
 
пневмомеханика
пневмомеханикапневмомеханика
пневмомеханика
mashresurs
 
Massey ferguson mf 7272 combine parts catalogue manual
Massey ferguson mf 7272 combine parts catalogue manualMassey ferguson mf 7272 combine parts catalogue manual
Massey ferguson mf 7272 combine parts catalogue manual
hhfjksekmm
 
Massey ferguson mf 7278 combines ( -- 61123 --- 61115) parts catalogue manual
Massey ferguson mf 7278 combines ( -- 61123 --- 61115) parts catalogue manualMassey ferguson mf 7278 combines ( -- 61123 --- 61115) parts catalogue manual
Massey ferguson mf 7278 combines ( -- 61123 --- 61115) parts catalogue manual
fjsekdhjenmdn
 
Massey ferguson mf 7272 cerea combines parts catalogue manual
Massey ferguson mf 7272 cerea combines parts catalogue manualMassey ferguson mf 7272 cerea combines parts catalogue manual
Massey ferguson mf 7272 cerea combines parts catalogue manual
hhfjksekmm
 
электроника и микромеханика
электроника и микромеханикаэлектроника и микромеханика
электроника и микромеханика
mashresurs
 
Catalog dụng cụ cầm tay, máy cầm tay, kim khí 2015
Catalog dụng cụ cầm tay, máy cầm tay, kim khí 2015Catalog dụng cụ cầm tay, máy cầm tay, kim khí 2015
Catalog dụng cụ cầm tay, máy cầm tay, kim khí 2015
IBS MRO
 
ключи динамометрические и мультипликаторы
ключи динамометрические и мультипликаторыключи динамометрические и мультипликаторы
ключи динамометрические и мультипликаторы
mashresurs
 
C43r Sewer Nozzle Assembly
C43r Sewer Nozzle AssemblyC43r Sewer Nozzle Assembly
C43r Sewer Nozzle Assembly
DirectHitNozzles
 
C38r Nozzle Assembly for over 34
C38r Nozzle Assembly for over 34C38r Nozzle Assembly for over 34
C38r Nozzle Assembly for over 34
DirectHitNozzles
 
Massey ferguson mf 7252 combine parts catalogue manual
Massey ferguson mf 7252 combine parts catalogue manualMassey ferguson mf 7252 combine parts catalogue manual
Massey ferguson mf 7252 combine parts catalogue manual
jjfksekdmejik
 
Massey ferguson mf 7250 combine parts catalogue manual
Massey ferguson mf 7250 combine parts catalogue manualMassey ferguson mf 7250 combine parts catalogue manual
Massey ferguson mf 7250 combine parts catalogue manual
ifkkdkmdmd
 
Massey ferguson mf 7252 combine parts catalogue manual
Massey ferguson mf 7252 combine parts catalogue manualMassey ferguson mf 7252 combine parts catalogue manual
Massey ferguson mf 7252 combine parts catalogue manual
ifkkdkmdmd
 
Massey ferguson mf 7250 combine parts catalogue manual
Massey ferguson mf 7250 combine parts catalogue manualMassey ferguson mf 7250 combine parts catalogue manual
Massey ferguson mf 7250 combine parts catalogue manual
jjfksekdmejik
 
Massey ferguson mf 7252 combine parts catalogue manual
Massey ferguson mf 7252 combine parts catalogue manualMassey ferguson mf 7252 combine parts catalogue manual
Massey ferguson mf 7252 combine parts catalogue manual
fjjskqazxedmmem
 
Massey ferguson mf 7250 combine parts catalogue manual
Massey ferguson mf 7250 combine parts catalogue manualMassey ferguson mf 7250 combine parts catalogue manual
Massey ferguson mf 7250 combine parts catalogue manual
hhfjksekmm
 
18. New C43rs How it works.pdf
18. New C43rs How it works.pdf18. New C43rs How it works.pdf
18. New C43rs How it works.pdf
DirectHitNozzles
 
17. C38rs with 3 x side jet Carriage and How it works.pdf
17. C38rs with 3 x side jet Carriage and How it works.pdf17. C38rs with 3 x side jet Carriage and How it works.pdf
17. C38rs with 3 x side jet Carriage and How it works.pdf
DirectHitNozzles
 
C38rs How it works.pdf
C38rs How it works.pdfC38rs How it works.pdf
C38rs How it works.pdf
DirectHitNozzles
 
The C38rs: How it works
The C38rs: How it worksThe C38rs: How it works
The C38rs: How it works
DirectHitNozzles
 
C43T Cap Starter Kit Add Ons
C43T Cap Starter Kit Add OnsC43T Cap Starter Kit Add Ons
C43T Cap Starter Kit Add Ons
DirectHitNozzles
 
C43 Cap To Back Starter Kit For Pumps Under 21 litres per minute
C43 Cap To Back Starter Kit For Pumps Under 21 litres per minuteC43 Cap To Back Starter Kit For Pumps Under 21 litres per minute
C43 Cap To Back Starter Kit For Pumps Under 21 litres per minute
DirectHitNozzles
 

More Related Content

What's hot

Direct Hit DC38 Sewer Nozzle Assembly
Direct Hit DC38 Sewer Nozzle Assembly Direct Hit DC38 Sewer Nozzle Assembly
Direct Hit DC38 Sewer Nozzle Assembly
DirectHitNozzles
 

What's hot (8)

Direct Hit DC38 Sewer Nozzle Assembly
Direct Hit DC38 Sewer Nozzle Assembly Direct Hit DC38 Sewer Nozzle Assembly
Direct Hit DC38 Sewer Nozzle Assembly
 
пневмомеханика
пневмомеханикапневмомеханика
пневмомеханика
 
Massey ferguson mf 7272 combine parts catalogue manual
Massey ferguson mf 7272 combine parts catalogue manualMassey ferguson mf 7272 combine parts catalogue manual
Massey ferguson mf 7272 combine parts catalogue manual
 
Massey ferguson mf 7278 combines ( -- 61123 --- 61115) parts catalogue manual
Massey ferguson mf 7278 combines ( -- 61123 --- 61115) parts catalogue manualMassey ferguson mf 7278 combines ( -- 61123 --- 61115) parts catalogue manual
Massey ferguson mf 7278 combines ( -- 61123 --- 61115) parts catalogue manual
 
Massey ferguson mf 7272 cerea combines parts catalogue manual
Massey ferguson mf 7272 cerea combines parts catalogue manualMassey ferguson mf 7272 cerea combines parts catalogue manual
Massey ferguson mf 7272 cerea combines parts catalogue manual
 
электроника и микромеханика
электроника и микромеханикаэлектроника и микромеханика
электроника и микромеханика
 
Catalog dụng cụ cầm tay, máy cầm tay, kim khí 2015
Catalog dụng cụ cầm tay, máy cầm tay, kim khí 2015Catalog dụng cụ cầm tay, máy cầm tay, kim khí 2015
Catalog dụng cụ cầm tay, máy cầm tay, kim khí 2015
 
ключи динамометрические и мультипликаторы
ключи динамометрические и мультипликаторыключи динамометрические и мультипликаторы
ключи динамометрические и мультипликаторы
 

Similar to Direct Hit DC43t Sewer Nozzle and Drain Clearing Assembly - How It Works

C43r Sewer Nozzle Assembly
C43r Sewer Nozzle AssemblyC43r Sewer Nozzle Assembly
C43r Sewer Nozzle Assembly
DirectHitNozzles
 
C38r Nozzle Assembly for over 34
C38r Nozzle Assembly for over 34C38r Nozzle Assembly for over 34
C38r Nozzle Assembly for over 34
DirectHitNozzles
 

Similar to Direct Hit DC43t Sewer Nozzle and Drain Clearing Assembly - How It Works (8)

C43r Sewer Nozzle Assembly
C43r Sewer Nozzle AssemblyC43r Sewer Nozzle Assembly
C43r Sewer Nozzle Assembly
 
C38r Nozzle Assembly for over 34
C38r Nozzle Assembly for over 34C38r Nozzle Assembly for over 34
C38r Nozzle Assembly for over 34
 
Massey ferguson mf 7252 combine parts catalogue manual
Massey ferguson mf 7252 combine parts catalogue manualMassey ferguson mf 7252 combine parts catalogue manual
Massey ferguson mf 7252 combine parts catalogue manual
 
Massey ferguson mf 7250 combine parts catalogue manual
Massey ferguson mf 7250 combine parts catalogue manualMassey ferguson mf 7250 combine parts catalogue manual
Massey ferguson mf 7250 combine parts catalogue manual
 
Massey ferguson mf 7252 combine parts catalogue manual
Massey ferguson mf 7252 combine parts catalogue manualMassey ferguson mf 7252 combine parts catalogue manual
Massey ferguson mf 7252 combine parts catalogue manual
 
Massey ferguson mf 7250 combine parts catalogue manual
Massey ferguson mf 7250 combine parts catalogue manualMassey ferguson mf 7250 combine parts catalogue manual
Massey ferguson mf 7250 combine parts catalogue manual
 
Massey ferguson mf 7252 combine parts catalogue manual
Massey ferguson mf 7252 combine parts catalogue manualMassey ferguson mf 7252 combine parts catalogue manual
Massey ferguson mf 7252 combine parts catalogue manual
 
Massey ferguson mf 7250 combine parts catalogue manual
Massey ferguson mf 7250 combine parts catalogue manualMassey ferguson mf 7250 combine parts catalogue manual
Massey ferguson mf 7250 combine parts catalogue manual
 

More from DirectHitNozzles

C43T Cap Starter Kit Add Ons
C43T Cap Starter Kit Add OnsC43T Cap Starter Kit Add Ons
C43T Cap Starter Kit Add Ons
DirectHitNozzles
 
C43 Cap To Back Starter Kit For Pumps Under 21 litres per minute
C43 Cap To Back Starter Kit For Pumps Under 21 litres per minuteC43 Cap To Back Starter Kit For Pumps Under 21 litres per minute
C43 Cap To Back Starter Kit For Pumps Under 21 litres per minute
DirectHitNozzles
 
C38 Cap Starter Kit For Pumps Under 21 litres per minute
C38 Cap Starter Kit For Pumps Under 21 litres per minuteC38 Cap Starter Kit For Pumps Under 21 litres per minute
C38 Cap Starter Kit For Pumps Under 21 litres per minute
DirectHitNozzles
 
C43 Cap To Back Sewer Nozzle Kit
C43 Cap To Back Sewer Nozzle KitC43 Cap To Back Sewer Nozzle Kit
C43 Cap To Back Sewer Nozzle Kit
DirectHitNozzles
 
C43 Cap to Back Nozzle Assembly
C43 Cap to Back Nozzle AssemblyC43 Cap to Back Nozzle Assembly
C43 Cap to Back Nozzle Assembly
DirectHitNozzles
 
C43 Back To Back Nozzle Assembly
C43 Back To Back Nozzle AssemblyC43 Back To Back Nozzle Assembly
C43 Back To Back Nozzle Assembly
DirectHitNozzles
 
C38 Cap To Back Root Cutting Assembly
C38 Cap To Back Root Cutting AssemblyC38 Cap To Back Root Cutting Assembly
C38 Cap To Back Root Cutting Assembly
DirectHitNozzles
 

More from DirectHitNozzles (12)

18. New C43rs How it works.pdf
18. New C43rs How it works.pdf18. New C43rs How it works.pdf
18. New C43rs How it works.pdf
 
17. C38rs with 3 x side jet Carriage and How it works.pdf
17. C38rs with 3 x side jet Carriage and How it works.pdf17. C38rs with 3 x side jet Carriage and How it works.pdf
17. C38rs with 3 x side jet Carriage and How it works.pdf
 
C38rs How it works.pdf
C38rs How it works.pdfC38rs How it works.pdf
C38rs How it works.pdf
 
The C38rs: How it works
The C38rs: How it worksThe C38rs: How it works
The C38rs: How it works
 
C43T Cap Starter Kit Add Ons
C43T Cap Starter Kit Add OnsC43T Cap Starter Kit Add Ons
C43T Cap Starter Kit Add Ons
 
C43 Cap To Back Starter Kit For Pumps Under 21 litres per minute
C43 Cap To Back Starter Kit For Pumps Under 21 litres per minuteC43 Cap To Back Starter Kit For Pumps Under 21 litres per minute
C43 Cap To Back Starter Kit For Pumps Under 21 litres per minute
 
C38 Cap Starter Kit For Pumps Under 21 litres per minute
C38 Cap Starter Kit For Pumps Under 21 litres per minuteC38 Cap Starter Kit For Pumps Under 21 litres per minute
C38 Cap Starter Kit For Pumps Under 21 litres per minute
 
C43 Cap To Back Sewer Nozzle Kit
C43 Cap To Back Sewer Nozzle KitC43 Cap To Back Sewer Nozzle Kit
C43 Cap To Back Sewer Nozzle Kit
 
C43 Cap to Back Nozzle Assembly
C43 Cap to Back Nozzle AssemblyC43 Cap to Back Nozzle Assembly
C43 Cap to Back Nozzle Assembly
 
C43 Back To Back Nozzle Assembly
C43 Back To Back Nozzle AssemblyC43 Back To Back Nozzle Assembly
C43 Back To Back Nozzle Assembly
 
C38 Cap To Back Root Cutting Assembly
C38 Cap To Back Root Cutting AssemblyC38 Cap To Back Root Cutting Assembly
C38 Cap To Back Root Cutting Assembly
 
C38 Sewer Nozzle Assembly
C38 Sewer Nozzle AssemblyC38 Sewer Nozzle Assembly
C38 Sewer Nozzle Assembly
 

Recently uploaded

2k Shots ≽ 9205541914 ≼ Call Girls In Palam (Delhi)
2k Shots ≽ 9205541914 ≼ Call Girls In Palam (Delhi)2k Shots ≽ 9205541914 ≼ Call Girls In Palam (Delhi)
2k Shots ≽ 9205541914 ≼ Call Girls In Palam (Delhi)
Delhi Call girls
 
the Husband rolesBrown Aesthetic Cute Group Project Presentation
the Husband rolesBrown Aesthetic Cute Group Project Presentationthe Husband rolesBrown Aesthetic Cute Group Project Presentation
the Husband rolesBrown Aesthetic Cute Group Project Presentation
brynpueblos04
 
call Now 9811711561 Cash Payment乂 Call Girls in Dwarka Mor
call Now 9811711561 Cash Payment乂 Call Girls in Dwarka Morcall Now 9811711561 Cash Payment乂 Call Girls in Dwarka Mor
call Now 9811711561 Cash Payment乂 Call Girls in Dwarka Mor
vikas rana
 
KLINIK BATA Jual obat penggugur kandungan 087776558899 ABORSI JANIN KEHAMILAN...
KLINIK BATA Jual obat penggugur kandungan 087776558899 ABORSI JANIN KEHAMILAN...KLINIK BATA Jual obat penggugur kandungan 087776558899 ABORSI JANIN KEHAMILAN...
KLINIK BATA Jual obat penggugur kandungan 087776558899 ABORSI JANIN KEHAMILAN...
Cara Menggugurkan Kandungan 087776558899
 
(Anamika) VIP Call Girls Navi Mumbai Call Now 8250077686 Navi Mumbai Escorts ...
(Anamika) VIP Call Girls Navi Mumbai Call Now 8250077686 Navi Mumbai Escorts ...(Anamika) VIP Call Girls Navi Mumbai Call Now 8250077686 Navi Mumbai Escorts ...
(Anamika) VIP Call Girls Navi Mumbai Call Now 8250077686 Navi Mumbai Escorts ...
Call Girls in Nagpur High Profile Call Girls
 
Call Girls In Mumbai Just Genuine Call ☎ 7738596112✅ Call Girl Andheri East G...
Call Girls In Mumbai Just Genuine Call ☎ 7738596112✅ Call Girl Andheri East G...Call Girls In Mumbai Just Genuine Call ☎ 7738596112✅ Call Girl Andheri East G...
Call Girls In Mumbai Just Genuine Call ☎ 7738596112✅ Call Girl Andheri East G...
mitaliverma221
 
(Aarini) Russian Call Girls Surat Call Now 8250077686 Surat Escorts 24x7
(Aarini) Russian Call Girls Surat Call Now 8250077686 Surat Escorts 24x7(Aarini) Russian Call Girls Surat Call Now 8250077686 Surat Escorts 24x7
(Aarini) Russian Call Girls Surat Call Now 8250077686 Surat Escorts 24x7
Call Girls in Nagpur High Profile Call Girls
 
2k Shots ≽ 9205541914 ≼ Call Girls In Dashrath Puri (Delhi)
2k Shots ≽ 9205541914 ≼ Call Girls In Dashrath Puri (Delhi)2k Shots ≽ 9205541914 ≼ Call Girls In Dashrath Puri (Delhi)
2k Shots ≽ 9205541914 ≼ Call Girls In Dashrath Puri (Delhi)
Delhi Call girls
 
2k Shots ≽ 9205541914 ≼ Call Girls In Mukherjee Nagar (Delhi)
2k Shots ≽ 9205541914 ≼ Call Girls In Mukherjee Nagar (Delhi)2k Shots ≽ 9205541914 ≼ Call Girls In Mukherjee Nagar (Delhi)
2k Shots ≽ 9205541914 ≼ Call Girls In Mukherjee Nagar (Delhi)
Delhi Call girls
 
call Now 9811711561 Cash Payment乂 Call Girls in Dwarka
call Now 9811711561 Cash Payment乂 Call Girls in Dwarkacall Now 9811711561 Cash Payment乂 Call Girls in Dwarka
call Now 9811711561 Cash Payment乂 Call Girls in Dwarka
vikas rana
 
2k Shots ≽ 9205541914 ≼ Call Girls In Jasola (Delhi)
2k Shots ≽ 9205541914 ≼ Call Girls In Jasola (Delhi)2k Shots ≽ 9205541914 ≼ Call Girls In Jasola (Delhi)
2k Shots ≽ 9205541914 ≼ Call Girls In Jasola (Delhi)
Delhi Call girls
 

Recently uploaded (14)

2k Shots ≽ 9205541914 ≼ Call Girls In Palam (Delhi)
2k Shots ≽ 9205541914 ≼ Call Girls In Palam (Delhi)2k Shots ≽ 9205541914 ≼ Call Girls In Palam (Delhi)
2k Shots ≽ 9205541914 ≼ Call Girls In Palam (Delhi)
 
the Husband rolesBrown Aesthetic Cute Group Project Presentation
the Husband rolesBrown Aesthetic Cute Group Project Presentationthe Husband rolesBrown Aesthetic Cute Group Project Presentation
the Husband rolesBrown Aesthetic Cute Group Project Presentation
 
call Now 9811711561 Cash Payment乂 Call Girls in Dwarka Mor
call Now 9811711561 Cash Payment乂 Call Girls in Dwarka Morcall Now 9811711561 Cash Payment乂 Call Girls in Dwarka Mor
call Now 9811711561 Cash Payment乂 Call Girls in Dwarka Mor
 
KLINIK BATA Jual obat penggugur kandungan 087776558899 ABORSI JANIN KEHAMILAN...
KLINIK BATA Jual obat penggugur kandungan 087776558899 ABORSI JANIN KEHAMILAN...KLINIK BATA Jual obat penggugur kandungan 087776558899 ABORSI JANIN KEHAMILAN...
KLINIK BATA Jual obat penggugur kandungan 087776558899 ABORSI JANIN KEHAMILAN...
 
(Anamika) VIP Call Girls Navi Mumbai Call Now 8250077686 Navi Mumbai Escorts ...
(Anamika) VIP Call Girls Navi Mumbai Call Now 8250077686 Navi Mumbai Escorts ...(Anamika) VIP Call Girls Navi Mumbai Call Now 8250077686 Navi Mumbai Escorts ...
(Anamika) VIP Call Girls Navi Mumbai Call Now 8250077686 Navi Mumbai Escorts ...
 
LC_YouSaidYes_NewBelieverBookletDone.pdf
LC_YouSaidYes_NewBelieverBookletDone.pdfLC_YouSaidYes_NewBelieverBookletDone.pdf
LC_YouSaidYes_NewBelieverBookletDone.pdf
 
Call Girls In Mumbai Just Genuine Call ☎ 7738596112✅ Call Girl Andheri East G...
Call Girls In Mumbai Just Genuine Call ☎ 7738596112✅ Call Girl Andheri East G...Call Girls In Mumbai Just Genuine Call ☎ 7738596112✅ Call Girl Andheri East G...
Call Girls In Mumbai Just Genuine Call ☎ 7738596112✅ Call Girl Andheri East G...
 
(Aarini) Russian Call Girls Surat Call Now 8250077686 Surat Escorts 24x7
(Aarini) Russian Call Girls Surat Call Now 8250077686 Surat Escorts 24x7(Aarini) Russian Call Girls Surat Call Now 8250077686 Surat Escorts 24x7
(Aarini) Russian Call Girls Surat Call Now 8250077686 Surat Escorts 24x7
 
2k Shots ≽ 9205541914 ≼ Call Girls In Dashrath Puri (Delhi)
2k Shots ≽ 9205541914 ≼ Call Girls In Dashrath Puri (Delhi)2k Shots ≽ 9205541914 ≼ Call Girls In Dashrath Puri (Delhi)
2k Shots ≽ 9205541914 ≼ Call Girls In Dashrath Puri (Delhi)
 
2k Shots ≽ 9205541914 ≼ Call Girls In Mukherjee Nagar (Delhi)
2k Shots ≽ 9205541914 ≼ Call Girls In Mukherjee Nagar (Delhi)2k Shots ≽ 9205541914 ≼ Call Girls In Mukherjee Nagar (Delhi)
2k Shots ≽ 9205541914 ≼ Call Girls In Mukherjee Nagar (Delhi)
 
Pokemon Go... Unraveling the Conspiracy Theory
Pokemon Go... Unraveling the Conspiracy TheoryPokemon Go... Unraveling the Conspiracy Theory
Pokemon Go... Unraveling the Conspiracy Theory
 
call Now 9811711561 Cash Payment乂 Call Girls in Dwarka
call Now 9811711561 Cash Payment乂 Call Girls in Dwarkacall Now 9811711561 Cash Payment乂 Call Girls in Dwarka
call Now 9811711561 Cash Payment乂 Call Girls in Dwarka
 
2k Shots ≽ 9205541914 ≼ Call Girls In Jasola (Delhi)
2k Shots ≽ 9205541914 ≼ Call Girls In Jasola (Delhi)2k Shots ≽ 9205541914 ≼ Call Girls In Jasola (Delhi)
2k Shots ≽ 9205541914 ≼ Call Girls In Jasola (Delhi)
 
WOMEN EMPOWERMENT women empowerment.pptx
WOMEN EMPOWERMENT women empowerment.pptxWOMEN EMPOWERMENT women empowerment.pptx
WOMEN EMPOWERMENT women empowerment.pptx
 

Direct Hit DC43t Sewer Nozzle and Drain Clearing Assembly - How It Works

  • 1. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Rings How to build your custom DC43T Starter Kit assembly and then add to it © Copyright Jim Paris 2013 PCT/AU2012/000326 Back 30° 100 MM 150 MM 225 MM 30º 30º 24º thruster DIRECT HIT® www.DirectHitSewerNozzles.com M: 23 09 14
  • 2. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Rings The DC43T back-to-back works in any of the 100mm pipe combinations shown below © Copyright Jim Paris 2013 PCT/AU2012/000326 Back 30° 100 MM 150 MM 225 MM 30º 30º 24º thruster DIRECT HIT® over 34 litres in 100mm lines except the red arrows. can not go down the red arrows. can not go down the red arrows. DC43T back-to-back 30º thruster 30º front 30º and back 30° L/S:12/03/14
  • 3. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Rings © Copyright Jim Paris 2013 PCT/AU2012/000326 Back 30° 100 MM 150 MM 225 MM 30º 30º 24º thruster The DC43T back-to-back works in any of the 150 mm pipe combinations shown below L/S:12/03/14 DIRECT HIT® over 34 litres in 150mm lines thruster DC43T back-to-back 30º 30º front 30º and back 30°
  • 4. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Rings DC43T back-to-back (front and back revere turbo nozzles) DC43T back-to-back in 100 mm lines (what can it go through, around, up or down) © Copyright Jim Paris 2013 PCT/AU2012/000326 Back 30° 100 MM 150 MM 225 MM 30º 30º 24º thruster Clean drain walls Unblock grease, soap etc. Remove sand from lines & grates Harden deposits, lime, cement etc. Ice in drains Cut dead or alive tree roots FAST Penetrate dead or alive tree roots FAST Adjust assembly to suit 100, 150 & 225 lines Clean manholes, shafts, pits & hydro excavate YES YES YES YES YES YES YES YES YES NO NO NO NO YES YES YES YES YES 80 mm using 03 Hose 90 mm using 03 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 50 mm Min Access No 50 mm Bend 150 mm using 03 or 04 Hose
  • 5. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings The DC43T carriage. PCT/AU2012/000326 Front view Side view Back view Note: the DC43T carriage has a oring on each side 100 MM 150 MM 225 MM 30º 30º 24º thruster PCT/AU2012/000326
  • 6. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings Front view Back view Take the thruster 100 MM 150 MM 225 MM 30º 30º 24º PCT/AU2012/000326 thruster
  • 7. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings Take your back nozzle thruster 100 MM 150 MM 225 MM 30º 30º 24º PCT/AU2012/000326 Top view
  • 8. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings Screw onto the thruster the turbo nozzle thruster 30º 100 MM 150 MM 225 MM PCT/AU2012/000326 30º 24º Top view
  • 9. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings Connect the thruster with the carriage thruster PCT/AU2012/000326 30º 100 MM 150 MM 225 MM 30º 24º Top view
  • 10. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings thruster Take the 30 degree front nozzle PCT/AU2012/000326 30º 30º 100 MM 150 MM 225 MM 24º Top view
  • 11. DC43T Carriage 30º Thruster Front 30° Front 24° Ring 30º Cap Back 30° Rings thruster Screw and tighten up the front nozzle through the carriage into the thruster PCT/AU2012/000326 24º 100 MM 150 MM 225 MM Top view
  • 12. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º thruster PCT/AU2012/000326 30º Connect you carriage to the jetter hose 100 MM 150 MM 225 MM 24º Top view
  • 13. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º 30º 30º thruster Place assembly in the pipe Side view
  • 14. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º 30º thruster Turn the water on 100 MM 150 MM 225 MM 24º Side view
  • 15. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings How the assembly works in 100 pipe and 150 mm pipes 420mm 150mm 420mm 230mm 100mm 230mm cut cut & thrust assembly travelling this way 100 MM 150 MM 225 MM 24º Side view
  • 16. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º How does the DC43t with its 30º front & back turbo nozzle work in 100-150mm with no rings 420mm 150mm 230mm cut 24º © Copyright Jim Paris 2013 100mm DC43t traveling this way hits the blockage 24º tree root blockage cut & thrust 80mm Side view
  • 17. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º © Copyright Jim Paris 2013 150mm 100mm 80mm go back and forward 80mm 24º tree root blockage cut 24º How does the DC43t with its 30º front & back turbo nozzle work in 100-150mm with no rings Side view
  • 18. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º How does the DC43t with its 30º front & back turbo nozzle work in 100-150mm with no rings cut 24º cut & thrust © Copyright Jim Paris 2013 150mm 100mm DC43t is through the blockage 24º tree root blockage 80mm Side view
  • 19. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º How does the DC43t with its 30º front & back turbo nozzle work in 100-150mm with no rings © Copyright Jim Paris 2013 150mm 24º tree root blockage cut & thrust 24º 100mm DC43t is cutting through the blockage Side view
  • 20. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º How does the DC43t with its 30º front & back turbo nozzle work in 100-150mm with no rings © Copyright Jim Paris 2013 150mm 100mm cut & thrust DC43t is cutting through the blockage Side view
  • 21. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º How does the DC43t with its 30º front & back turbo nozzle work in 100-150mm with no rings © Copyright Jim Paris 2013 150mm 100mm cut & thrust DC43t has cut the root blockage Side view
  • 22. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º 30º thruster Turn the water off 100 MM 150 MM 225 MM 24º Side view
  • 23. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º thruster PCT/AU2012/000326 30º Remove assembly from the pipe 100 MM 150 MM 225 MM 24º Top view
  • 24. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º thruster PCT/AU2012/000326 30º Remove front 30 degree turbo nozzle 100 MM 150 MM 225 MM 24º Top view
  • 25. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings thruster PCT/AU2012/000326 30º Take the Ring Cap 100 MM 150 MM 225 MM 24º 30º Top view
  • 26. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings Screw and tighten up the Ring Cap through the carriage into the thruster thruster PCT/AU2012/000326 30º 100 MM 150 MM 225 MM 30º 24º Top view
  • 27. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings thruster PCT/AU2012/000326 30º Place assembly in the pipe 100 MM 150 MM 225 MM 30º 24º Top view
  • 28. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 24º Turn the water on 30º thruster Side view
  • 29. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º thruster 100 MM 150 MM 225 MM 30º 24º With the ring cap on it will give you more thrust to send your assembly further Side view
  • 30. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings How the assembly works in 100 pipe and 150 mm pipes 150mm 420mm 100mm 230mm cut cut & thrust assembly traveling this way with 100% back cutting power 100 MM 150 MM 225 MM 30º 24º Side view
  • 31. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º thruster Turn the water off 100 MM 150 MM 225 MM 30º 24º Side view
  • 32. 30º DC43T Carriage Rings Ring Cap Front 30° Front 24° Thruster Back 30° PCT/AU2012/000326 thruster Remove assembly from the pipe 30º 24º 100 MM 150 MM 225 MM Top view
  • 33. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings thruster PCT/AU2012/000326 30º Remove the ring cap 100 MM 150 MM 225 MM 30º 24º Top view
  • 34. 30º DC43T Carriage Rings Ring Cap Front 30° Front 24° Thruster Back 30° PCT/AU2012/000326 thruster Take the 30 degree front nozzle 30º 24º 100 MM 150 MM 225 MM Top view
  • 35. DC43T 30º Carriage Thruster Front 30° Front 24° Ring 30º Cap Back 30° Rings PCT/AU2012/000326 thruster Screw and tighten up the Ring Cap through the carriage into the thruster 24º 100 MM 150 MM 225 MM Top view
  • 36. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º thruster PCT/AU2012/000326 30º Take the 100 mm Ring 100 MM 150 MM 225 MM 24º Top view
  • 37. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º thruster PCT/AU2012/000326 30º Add the ring to the front nozzle 100 MM 150 MM 225 MM 24º Top view
  • 38. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º thruster PCT/AU2012/000326 30º Add the cir clip 150 MM 225 MM 24º Top view
  • 39. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º thruster PCT/AU2012/000326 30º Add the ring 150 MM 225 MM 24º Top view
  • 40. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º thruster PCT/AU2012/000326 30º Add the cir clip 150 MM 225 MM 24º Top view
  • 41. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º 30º thruster Place assembly in the pipe 150 MM 225 MM 24º Side view
  • 42. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º 30º thruster Turn the water on 150 MM 225 MM 24º Side view
  • 43. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings How do rings work in 150 mm pipes 290mm 150mm front cut cut & thrust assembly traveling this way you will have from 20 to 40% front cutting power 150 MM 225 MM 24º Side view
  • 44. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º 30º thruster Turn the water off 150 MM 225 MM 24º Side view
  • 45. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º thruster PCT/AU2012/000326 30º Remove assembly from the pipe 150 MM 225 MM 24º Top view
  • 46. Remove ring from front nozzle and install it to the back nozzle DC43T Carriage 30º Thruster Front 30° Front 24° Ring 30º Cap Back 30° Rings PCT/AU2012/000326 thruster 24º 150 MM 225 MM Top view
  • 47. DC43T Carriage 30º Thruster Front 30° Front 24° Ring 30º Cap Back 30° Rings PCT/AU2012/000326 thruster 24º 150 MM 225 MM Top view
  • 48. DC43T Carriage 30º Thruster Front 30° Front 24° Ring 30º Cap Back 30° Rings PCT/AU2012/000326 thruster 24º 150 MM 225 MM Top view
  • 49. DC43T Carriage 30º Thruster Front 30° Front 24° Ring 30º Cap Back 30° Rings PCT/AU2012/000326 thruster 24º 150 MM 225 MM Top view
  • 50. DC43T Carriage 30º Thruster Front 30° Front 24° Ring 30º Cap Back 30° Rings PCT/AU2012/000326 thruster 24º 150 MM 225 MM Top view
  • 51. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º thruster PCT/AU2012/000326 30º Place assembly in the pipe 150 MM 225 MM 24º Top view
  • 52. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º 30º thruster Turn the water on 150 MM 225 MM 24º Side view
  • 53. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º 30º thruster 150 MM 225 MM 24º Side view
  • 54. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings How do rings work in 150 mm pipes with a ring cap 150mm 290mm front cut cut & thrust assembly traveling this way you will have from 60 to 80% back cutting power 150 MM 225 MM 24º Side view
  • 55. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º 30º thruster Turn the water off 150 MM 225 MM 24º Side view
  • 56. DC43T Carriage 30º Thruster Front 30° Front 24° Ring 30º Cap Back 30° Rings PCT/AU2012/000326 thruster Remove assembly from the pipe 24º 150 MM 225 MM Top view
  • 57. DC43T 30º Carriage Thruster Front 30° Front 24° Ring 30º Cap Back 30° Rings PCT/AU2012/000326 thruster Remove front nozzle 24º 150 MM 225 MM Top view
  • 58. 30º DC43T Carriage Rings Ring Cap Front 30° Front 24° Thruster Back 30° PCT/AU2012/000326 thruster Take the Ring Cap 30º 24º 150 MM 225 MM Top view
  • 59. 30º DC43T Carriage Rings Ring Cap Front 30° Front 24° Thruster Back 30° PCT/AU2012/000326 thruster Screw in the ring cap trough the carriage into the truster with your ring spanner 30º 24º 150 MM 225 MM Top view
  • 60. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º thruster PCT/AU2012/000326 30º Place assembly in the pipe Top view
  • 61. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º 30º thruster Turn the water on Side view
  • 62. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 225 MM 24º 150 MM 30º 30º thruster Side view
  • 63. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings How do rings work in 150 mm pipes with a ring cap 150mm 290mm front cut cut & thrust assembly traveling this way you will have 100% back cutting power 150 MM 225 MM 24º 30º Side view
  • 64. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 225 MM 24º 150 MM 30º 30º thruster Turn the water off Side view
  • 65. 30º DC43T Carriage Rings Ring Cap Front 30° Front 24° Thruster Back 30° PCT/AU2012/000326 thruster Remove assembly from the pipe 30º 24º 150 MM 225 MM Top view
  • 66. 30º DC43T Carriage Rings Ring Cap Front 30° Front 24° Thruster Back 30° PCT/AU2012/000326 thruster Remove ring from back nozzle 30º 24º 150 MM 225 MM Top view
  • 67. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º thruster PCT/AU2012/000326 30º Top view
  • 68. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º thruster PCT/AU2012/000326 30º Top view
  • 69. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º 30º thruster PCT/AU2012/000326 30º Remove Ring Cap Top view
  • 70. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º 30º thruster PCT/AU2012/000326 30º Top view
  • 71. 30º DC43T Carriage Rings Ring Cap Front 30° Front 24° Thruster Back 30° PCT/AU2012/000326 thruster Take the 24 degree front nozzle 30º 24º 100 MM 150 MM 225 MM Top view
  • 72. DC43T 24º Carriage Thruster Front 30° Front 24° Ring 30º Cap Back 30° Rings PCT/AU2012/000326 thruster Screw and tighten up the front nozzle through the carriage into the thruster 30º 100 MM 150 MM 225 MM Top view
  • 73. DC43T Carriage 24º Thruster Front 30° Front 24° Ring 30º Cap Back 30° Rings PCT/AU2012/000326 thruster Place assembly in the pipe 30º 100 MM 150 MM 225 MM Top view
  • 74. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 24º Place assembly in the pipe 30º thruster Side view
  • 75. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings Turn the water on 2244º 30º thruster 100 MM 150 MM 225 MM 30º Side view
  • 76. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 30º How the assembly works in 100 pipe and 150 mm pipes 630mm 150mm 420mm 380mm 100mm 230mm better* penetration cut cut & thrust 100 MM 150 MM 225 MM assembly traveling this way with 24 degree front will have better* penetration power Side view
  • 77. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Back 30° Rings 2244º 30º thruster Turn the water off 100 MM 150 MM 225 MM 30º Side view
  • 78. DC43T Carriage Thruster Front 30° Front 24° Ring Cap Rings 24º thruster PCT/AU2012/000326 30º THE END Back 30° Remove assembly from the pipe 100 MM 150 MM 225 MM 30º Top view
  • 79. DIRECT HIT® © Copyright Jim Paris 2013 M: 23 09 14 www.DirectHitSewerNozzles.com