Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

Speciality Long Penetrator (C43r) - Forward Clearing Of Blocked Drains

405 views

Published on

Ideal weight to work in mains with front rings to cut, clean and flush down stream.

“Penetrate, unblock, cut tree roots, hard grease and flush out lines forwardly from 150 - 450 mm (6-18") lines.

Travels through 100 mm (4") bends and drops into a 150 mm (6")shaft when travelling downstream

Minimum hose size to be used with is 3/8".

Add a different size ring to increase its power.

  • Be the first to comment

  • Be the first to like this

Speciality Long Penetrator (C43r) - Forward Clearing Of Blocked Drains

  1. 1. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings How to build your custom C43r Direct Hit assemblies 100 MM 150 MM 225 MM PCT/AU2012/000326 30º 24º DIRECT HIT® © Copyright Jim Paris 2013 M: 20 09 14
  2. 2. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings From your C38r Starter kit take your carriage PCT/AU2012/000326 100 MM 150 MM 225 MM Front view Back view Side view 30º 24º
  3. 3. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings Add your swivel Side view PCT/AU2012/000326 100 MM 150 MM 225 MM 30º 24º
  4. 4. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings From your C38 Starter Kit take the front nozzle 100 MM 150 MM 225 MM 24º PCT/AU2012/000326 30º
  5. 5. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 30º PCT/AU2012/000326 100 MM 150 MM 225 MM 24º Screw them together with spanners provided in the Starter Kit
  6. 6. Connect your hose hose C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326
  7. 7. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings Place assembly in the pipe 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326
  8. 8. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings Turn the water on 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326
  9. 9. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 Turn the water off
  10. 10. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 Remove assembly from the pipe
  11. 11. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings Add the ring 150 MM 225 MM 24º 30º PCT/AU2012/000326
  12. 12. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings With circlip pliers add circlip one 150 MM 225 MM 24º 30º PCT/AU2012/000326
  13. 13. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings Add the ring 150 MM 225 MM 24º 30º PCT/AU2012/000326
  14. 14. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 With circlip pliers add circlip two
  15. 15. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 Place assembly in the pipe
  16. 16. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 Turn the water on
  17. 17. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 Turn the water off and remove assembly from the pipe
  18. 18. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 Remove the ring and circlips
  19. 19. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 Remove the ring and circlips
  20. 20. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 Remove the ring and circlips
  21. 21. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 Remove the ring and circlips
  22. 22. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 Insert C38r into a 50 mm pipe
  23. 23. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 100 MM 150 MM 225 MM 24º 30º Going through 50mm PVC pipe
  24. 24. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 100 MM 150 MM 225 MM 24º 30º Going down into the blockage PCT/AU2012/000326
  25. 25. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 100 MM 150 MM 225 MM 24º PCT/AU2012/000326
  26. 26. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 100 MM 150 MM 225 MM 24º Turn the water on
  27. 27. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 100 MM 150 MM 225 MM 24º Send down and unblock the drain
  28. 28. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 100 MM 150 MM 225 MM 24º Turn the water off
  29. 29. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 100 MM 150 MM 225 MM 24º PCT/AU2012/000326 30º Remove assembly from the pipe
  30. 30. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 100 MM 150 MM 225 MM 24º PCT/AU2012/000326 Un screw the front nozzle 30º
  31. 31. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 100 MM 150 MM 225 MM 30º 24º PCT/AU2012/000326
  32. 32. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 100 MM 150 MM 225 MM 30º 24º PCT/AU2012/000326 Take the cap from your Cap kit if you need to go further
  33. 33. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 100 MM 150 MM 225 MM 30º 24º Screw them together with spanners provided in the starter kit PCT/AU2012/000326
  34. 34. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 100 MM 150 MM 225 MM 30º 24º PCT/AU2012/000326 Place assembly in the pipe
  35. 35. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 100 MM 150 MM 225 MM 30º 24º PCT/AU2012/000326 Turn the water on
  36. 36. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 100 MM 150 MM 225 MM 30º 24º PCT/AU2012/000326 Turn the water off
  37. 37. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 100 MM 150 MM 225 MM 30º 24º PCT/AU2012/000326 Remove assembly from the pipe
  38. 38. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 100 MM 150 MM 225 MM 30º 24º PCT/AU2012/000326 Un screw the Cap
  39. 39. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 100 MM 150 MM 225 MM 30º 24º PCT/AU2012/000326
  40. 40. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 100 MM 150 MM 225 MM 30º Add your 24°extreem penetrator reverse turbo nozzle to the carriage PCT/AU2012/000326 24º
  41. 41. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 100 MM 150 MM 225 MM 30º Screw them together with spanners provided in the starter kit 24º PCT/AU2012/000326
  42. 42. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 100 MM 150 MM 225 MM 30º 24º PCT/AU2012/000326 Place the assembly in the pipe
  43. 43. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 100 MM 150 MM 225 MM 30º 2244ºº PCT/AU2012/000326 Turn the water on
  44. 44. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings 100 MM 150 MM 225 MM 30º 2244ºº PCT/AU2012/000326 Turn the water of
  45. 45. DIRECT HIT® © Copyright Jim Paris 2013 M: 20 09 14

×