Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

Extreme Big Cutter (DC43) for 150 mm to 300 mm (6-12") lines

319 views

Published on

The DC43 sewer nozzle assembly is to be used with all jetters under 31 litres per minute.

We recommend the DC43 to be used in lines from 100 mm to 300mm to cut roots and bigger lines to flush out debris. The C38rs can work in 90 mm lines without bends.

The DC43 cut through roots, grease, ice and blast through sand.

You will have the choice and flexibility to cut backwards with the most advance turbo nozzle technology in the world. The turbo nozzles that we use have tungsten carbide seats and can last up to 5 times longer than a ceramic seat.

Due to the laminar water that the turbo nozzles produce you will be able to use the assembly in all blocked drain scenarios. Cutting roots quickly will be very easy to do now.

You can use the assemblies in all pressures up to 5000 psi and in hot water up to 180 F or 82 C.

Published in: Devices & Hardware
  • Be the first to comment

  • Be the first to like this

Extreme Big Cutter (DC43) for 150 mm to 300 mm (6-12") lines

  1. 1. DC43 Carriage Front 30° Front 24° Ring Cap Rings How to build your custom DC43 Starter Kit assembly and then add to it © Copyright Jim Paris 2013 PCT/AU2012/000326 Back 30° 100 MM 150 MM 225 MM 30º 30º 24º DIRECT HIT® www.DirectHitSewerNozzles.com M: 23 09 14
  2. 2. Front 30° Front 24° Ring Cap Rings The DC43 back-to-back works in any of the 100mm pipe combinations shown below. © Copyright Jim Paris 2013 PCT/AU2012/000326 Back 30° 100 MM 150 MM 225 MM 30º 30º 24º DIRECT HIT® under 34 litres in 100mm lines DC43 back-to-back 30º 30º front 30º and back 30° DC43 Carriage L/S:31/03/14
  3. 3. Front 30° Front 24° Ring Cap Rings DC43 back-to-back (front and back reverse turbo nozzles) DC43 Carriage YES YES YES YES YES YES YES YES YES DC43 back-to-back in 100 mm lines (what can it go through, around, up or down) © Copyright Jim Paris 2013 PCT/AU2012/000326 Back 30° 100 MM 150 MM 225 MM 30º 30º 24º Clean drain walls Unblock grease, soap etc. Remove sand from lines & grates Harden deposits, lime, cement etc. Ice in drains Adjust assembly to suit 100 & 150 lines Clean manholes, shafts, pits & hydro excavate NO NO NO YES YES YES YES YES YES 80 mm using 03 Hose 90 mm using 03 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 50 mm Min Access No 50 mm Bend 150 mm using 03 or 04 Hose Cut tree roots FAST Penetrate tree roots FAST L/S:17/03/14
  4. 4. The DC43 carriage. Front 30° Front 24° Ring Cap Back 30° Rings Front view Side view Note: the DC43T carriage has a oring on each side Back view PCT/AU2012/000326 100 MM 150 MM 225 MM 30º 30º 24º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage
  5. 5. Take your back nozzle Front 30° Front 24° Ring Cap Back 30° Rings 30º 100 MM 150 MM 225 MM 30º 24º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  6. 6. Take your carriage Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 24º PCT/AU2012/000326 30º © Copyright Jim Paris 2013 DC43 Carriage Top view
  7. 7. Front 30° Front 24° Ring Cap Back 30° Rings PCT/AU2012/000326 30º 100 MM 150 MM 225 MM 30º 24º © Copyright Jim Paris 2013 DC43 Carriage Top view
  8. 8. Take the 30 degree front nozzle Front 30° Front 24° Ring Cap Back 30° Rings 30º PCT/AU2012/000326 100 MM 150 MM 225 MM 24º 30º © Copyright Jim Paris 2013 DC43 Carriage Top view
  9. 9. Take the 30 degree front nozzle 30º Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  10. 10. 30º Front 30° Front 24° Ring Cap Back 30° Rings 30º PCT/AU2012/000326 100 MM 150 MM 225 MM 24º Screw and tighten up the front nozzle through the carriage into the back nozzle © Copyright Jim Paris 2013 DC43 Carriage Top view
  11. 11. Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º 30º 30º Place assembly in the pipe © Copyright Jim Paris 2013 DC43 Carriage Side view
  12. 12. Front 30° Front 24° Ring Cap Back 30° Rings Turn the water on 100 MM 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  13. 13. Front 30° Front 24° Ring Cap Back 30° Rings How the assembly works in 100 pipe and 150 mm pipes 420mm 150mm 420mm 230mm 100mm 230mm cut cut & thrust assembly travelling this way 100 MM 150 MM 225 MM 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
  14. 14. Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings 420mm 150mm 230mm cut 24º © Copyright Jim Paris 2013 100mm DC43 traveling this way hits the blockage 90mm 24º tree root blockage cut & thrust Side view
  15. 15. Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage © Copyright Jim Paris 2013 150mm 100mm go back and forward 90mm 90mm 24º tree root blockage cut 24º How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings Side view
  16. 16. Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings tree root blockage cut 24º cut & thrust © Copyright Jim Paris 2013 150mm 100mm 24º DC43 is through the blockage 90mm Side view
  17. 17. Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings © Copyright Jim Paris 2013 150mm 24º tree root blockage cut & thrust 24º 100mm DC43 is cutting through the blockage Side view
  18. 18. Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings © Copyright Jim Paris 2013 150mm 100mm cut & thrust DC43 is cutting through the blockage Side view
  19. 19. Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings © Copyright Jim Paris 2013 150mm 100mm cut & thrust DC43 has cut the root blockage Side view
  20. 20. Front 30° Front 24° Ring Cap Back 30° Rings Turn the water off 100 MM 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  21. 21. Front 30° Front 24° Ring Cap Back 30° Rings Remove assembly from the pipe 100 MM 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  22. 22. Front 30° Front 24° Ring Cap Back 30° Rings Remove front 30 degree turbo nozzle 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 30º © Copyright Jim Paris 2013 DC43 Carriage Top view
  23. 23. Front 30° Front 24° Ring Cap Back 30° Rings Take the Ring Cap 100 MM 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  24. 24. Front 30° Front 24° Ring Cap Back 30° Rings Screw and tighten up the Ring Cap through the carriage into the back nozzle 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  25. 25. Front 30° Front 24° Ring Cap Back 30° Rings Place assembly in the pipe 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  26. 26. Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 24º Turn the water on 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  27. 27. Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 24º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  28. 28. Front 30° Front 24° Ring Cap Back 30° Rings How the assembly works in 100 pipe and 150 mm pipes 150mm 420mm 100mm 230mm cut cut & thrust assembly traveling this way with 100% back cutting power 100 MM 150 MM 225 MM 30º 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
  29. 29. Front 30° Front 24° Ring Cap Back 30° Rings Turn the water off 100 MM 150 MM 225 MM 30º 24º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  30. 30. Front 30° Front 24° Ring Cap Back 30° Rings Remove assembly from the pipe 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  31. 31. Remove the ring cap Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  32. 32. Front 30° Front 24° Ring Cap Back 30° Rings Take the 30 degree front nozzle 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  33. 33. Front 30° Front 24° Ring Cap Back 30° Rings Screw and tighten up the front 30 degree nozzle through the carriage into the back nozzle 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 30º © Copyright Jim Paris 2013 DC43 Carriage Top view
  34. 34. Front 30° Front 24° Ring Cap Back 30° Rings 30º Take the 100 mm Ring 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  35. 35. Front 30° Front 24° Ring Cap Back 30° Rings 30º Add the ring to the front nozzle 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  36. 36. Front 30° Front 24° Ring Cap Back 30° Rings 30º Add the cir clip 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  37. 37. Front 30° Front 24° Ring Cap Back 30° Rings 30º Add the ring 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  38. 38. Front 30° Front 24° Ring Cap Back 30° Rings 30º Add the cir clip 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  39. 39. Front 30° Front 24° Ring Cap Back 30° Rings 30º Place assembly in the pipe 150 MM 225 MM 24º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  40. 40. Front 30° Front 24° Ring Cap Back 30° Rings Turn the water on 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  41. 41. Front 30° Front 24° Ring Cap Back 30° Rings How do rings work in 150 mm pipes 290mm 150mm front cut cut & thrust assembly traveling this way you will have from 20 to 40% front cutting power 150 MM 225 MM 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
  42. 42. Front 30° Front 24° Ring Cap Back 30° Rings Turn the water off 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  43. 43. 30º Remove assembly from the pipe Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  44. 44. Remove ring from front nozzle and install it to the back nozzle 30º Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  45. 45. 30º Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  46. 46. 30º Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  47. 47. 30º Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  48. 48. 30º Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  49. 49. 30º Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  50. 50. Turn the water on Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  51. 51. Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  52. 52. Front 30° Front 24° Ring Cap Back 30° Rings How do rings work in 150 mm pipes with a ring cap 150mm 290mm front cut cut & thrust assembly traveling this way you will have from 60 to 80% back cutting power 150 MM 225 MM 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
  53. 53. Front 30° Front 24° Ring Cap Back 30° Rings Turn the water off 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  54. 54. 30º Front 30° Front 24° Ring Cap Back 30° Rings Remove assembly from the pipe 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  55. 55. Front 30° Front 24° Ring Cap Back 30° Rings Remove front nozzle 150 MM 225 MM 24º 30º PCT/AU2012/000326 30º © Copyright Jim Paris 2013 DC43 Carriage Top view
  56. 56. Front 30° Front 24° Ring Cap Back 30° Rings Take the Ring Cap 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  57. 57. Front 30° Front 24° Ring Cap Back 30° Rings Screw in the ring cap trough the carriage into the back nozzle with your ring spanner 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  58. 58. Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º Place assembly in the pipe 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  59. 59. Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º Turn the water on 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  60. 60. Front 30° Front 24° Ring Cap Back 30° Rings 225 MM 24º 150 MM 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  61. 61. Front 30° Front 24° Ring Cap Back 30° Rings How do rings work in 150 mm pipes with a ring cap 150mm 290mm front cut cut & thrust assembly traveling this way you will have 100% back cutting power 150 MM 225 MM 24º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  62. 62. Front 30° Front 24° Ring Cap Back 30° Rings 225 MM 24º 150 MM 30º Turn the water off 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  63. 63. Front 30° Front 24° Ring Cap Back 30° Rings Remove assembly from the pipe 225 MM 24º 150 MM 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  64. 64. Front 30° Front 24° Ring Cap Back 30° Rings Remove ring from back nozzle 225 MM 24º 150 MM 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  65. 65. Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  66. 66. Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  67. 67. Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º 30º Remove Ring Cap 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  68. 68. Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  69. 69. Front 30° Front 24° Ring Cap Back 30° Rings Take the 24 degree front nozzle 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  70. 70. 24º Front 30° Front 24° Ring Cap Back 30° Rings Screw and tighten up the front 24 degree nozzle through the carriage into the back nozzle 100 MM 150 MM 225 MM 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  71. 71. Front 30° Front 24° Ring Cap Back 30° Rings Place assembly in the pipe 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  72. 72. Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º Place assembly in the pipe 30º 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
  73. 73. Turn the water on Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 30º 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
  74. 74. Front 30° Front 24° Ring Cap Back 30° Rings 30º How the assembly works in 100 pipe and 150 mm pipes 630mm 150mm 420mm 380mm 100mm 230mm better* penetration cut cut & thrust 100 MM 150 MM 225 MM assembly traveling this way with 24 degree front will have better* penetration power © Copyright Jim Paris 2013 DC43 Carriage Side view
  75. 75. Front 30° Front 24° Ring Cap Back 30° Rings Turn the water off 100 MM 150 MM 225 MM 30º 30º 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
  76. 76. Front 30° Front 24° Ring Cap Rings 24º THE END Back 30° Remove assembly from the pipe 100 MM 150 MM 225 MM 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  77. 77. DIRECT HIT® © Copyright Jim Paris 2013 M: 23 09 14 www.DirectHitSewerNozzles.com

×