2. From your C38r Starter kit take your carriage
Front view Back view Side view
PCT/AU2012/000326
C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
24º
3. Add your swivel
Side view
PCT/AU2012/000326
C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
24º
4. PCT/AU2012/000326
30º
From your C38 Starter Kit take the front nozzle
C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
24º
5. 30º
PCT/AU2012/000326
C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
24º
Screw them together with spanners provided in the Starter Kit
6. Connect your hose
e
C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
7. Place assembly in the pipe
C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
8. Turn the water on
C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
9. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
Turn the water off
10. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
Remove assembly from the pipe
11. Add the ring
C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
150 MM 225 MM
24º
30º
PCT/AU2012/000326
12. With circlip pliers add circlip one
C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
150 MM 225 MM
24º
30º
PCT/AU2012/000326
13. Add the ring
C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
150 MM 225 MM
24º
30º
PCT/AU2012/000326
14. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
150 MM 225 MM
24º
30º
PCT/AU2012/000326
With circlip pliers add circlip two
15. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
150 MM 225 MM
24º
30º
PCT/AU2012/000326
Place assembly in the pipe
16. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
150 MM 225 MM
24º
30º
PCT/AU2012/000326
Turn the water on
17. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
150 MM 225 MM
24º
30º
PCT/AU2012/000326
Turn the water off and remove assembly from the pipe
18. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
150 MM 225 MM
24º
30º
PCT/AU2012/000326
19. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
Remove the ring and circlips
20. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
24º
PCT/AU2012/000326
30º
Un screw the front nozzle
21. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
24º
PCT/AU2012/000326
22. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
24º
PCT/AU2012/000326
Take the cap from your Cap kit
23. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
24º
PCT/AU2012/000326
Screw them together with spanners provided in the starter kit
24. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
24º
PCT/AU2012/000326
Place assembly in the pipe
25. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
24º
PCT/AU2012/000326
Turn the water on
26. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
24º
PCT/AU2012/000326
Turn the water off
27. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
24º
PCT/AU2012/000326
Remove assembly from the pipe
28. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
24º
PCT/AU2012/000326
Un screw the Cap
29. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
24º
PCT/AU2012/000326
30. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
PCT/AU2012/000326
24º
Add your 24°extreem penetrator reverse turbo nozzle to the carriage
31. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
24º
PCT/AU2012/000326
Screw them together with spanners provided in the starter kit
32. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
24º
PCT/AU2012/000326
Place the assembly in the pipe
33. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
24º24º
PCT/AU2012/000326
Turn the water on