1. h Trained operations managers to use statistical process control for better understanding of
production line performance.
h Streamlined operations and broadened infrastructure to facilitate growth.
h Played a key role in streamlining daily business processes and increasing productivity levels.
h Established machining processes and utilized the latest tooling technologies to reduce lead time
and increase throughput efficiency.
h Employed statistical methods to measure and maintain quality objectively.
h Served as liaison with engineering, manufacturing, and service departments to ensure compliance
with procedures and timely, accurate distribution of corporate information.
h Conducted useful Load Verification Test.
h Designed and implemented processes to produce new products, expanding capability of factory
production by 10 %.
h Implemented production line upgrades, resulting in 25 % increased capacity.
h Instituted new product training program, reducing learning curve productivity loss by 37 %.
h Employed analytic techniques to assess productivity and identify opportunities to improve
systems and processes.
h Conducted multi-dimensional efficiency study to streamline processes and reduce operational
costs. Implemented study findings, resulting in $4 M savings.
h Spearheaded extranet development to support just-in-time materials delivery by vendors.
h Streamlined system to process customer returns and export licenses through development of
automated tracking program.
h Brainstormed with engineers and vendors to implement a cost effective customer service system,
recognizing savings of $ 2.5 M annually.

2. h Selected, measured, assembled, and set machine tools, such as drill bits and milling and cutting
tools, using precision gauges and instruments
h Mounted, installed, aligned, and secured tools, attachments, fixtures, and workpiece on machine,
using hand tools and precision measuring instruments
h Determined specifications and procedures for tooling set-up, machine operation, workpiece
dimensions, and numerical control sequences, using blueprints, instructions, and machine
knowledge
h Calculated and set machine controls to position tools, synchronize tape and tool, and regulate
cutting depth, speed, feed, and coolant flow
h Laid out and marked areas of part to be shot-peened, and filled hopper with shot
h Positioned and secured workpiece on machine bed, indexing table, fixture, and dispensing and
holding device
h Loaded control media, such as tape, card, and disk, in machine controller and entered commands
to retrieve programmed instructions
h Started automatic operation of numerical control machine to machine parts and tested setup,
workpiece dimensions, and programming
h Conferred with supervisor and programmer to resolve machine malfunctions and production errors
and obtained approval to continue production
h Maintained machines and removed and replaced broken and worn machine tools, using hand tools
h Examined electronic components for defects and completeness of laser-beam trimming, using
microscope
h Operated lathe, drill-press, jig-boring machine, and other machines manually and semi-
automatically
h Measured dimensions of finished workpiece to ensure conformance to specifications, using
precision measuring instruments, templates, and fixtures
h Entered commands and manually adjusted machine controls to correct malfunctions and
tolerances
h Stopped machine to remove finished workpiece and change tooling, setup, and workpiece
placement, according to required machining sequence
h Monitored machine operation and control panel displays to detect malfunctions and compare
readings to specifications
h Cleaned machine, tooling, and parts, using solvent and solution and rag
h Lifted workpiece to machine manually, with hoist and crane, and with tweezers

3. h Selected, measured, assembled, and set machine tools, such as drill bits and milling and cutting
tools, using precision gauges and instruments
h Mounted, installed, aligned, and secured tools, attachments, fixtures, and workpiece on machine,
using hand tools and precision measuring instruments
h Determined specifications and procedures for tooling set-up, machine operation, workpiece
dimensions, and numerical control sequences, using blueprints, instructions, and machine
knowledge
h Calculated and set machine controls to position tools, synchronize tape and tool, and regulate
cutting depth, speed, feed, and coolant flow
h Positioned and secured workpiece on machine bed, indexing table, fixture, and dispensing and
holding device
h Laid out and marked areas of part to be shot-peened, and filled hopper with shot
h Loaded control media, such as tape, card, and disk, in machine controller and entered commands
to retrieve programmed instructions
h Started automatic operation of numerical control machine to machine parts and tested setup,
workpiece dimensions, and programming
h Conferred with supervisor and programmer to resolve machine malfunctions and production errors
and obtained approval to continue production
h Maintained machines and removed and replaced broken and worn machine tools, using hand tools
h Examined electronic components for defects and completeness of laser-beam trimming, using
microscope
h Operated lathe, drill-press, jig-boring machine, and other machines manually and semi-
automatically
h Measured dimensions of finished workpiece to ensure conformance to specifications, using
precision measuring instruments, templates, and fixtures
h Entered commands and manually adjusted machine controls to correct malfunctions and
tolerances
h Lifted workpiece to machine manually, with hoist and crane, and with tweezers
h Stopped machine to remove finished workpiece and change tooling, setup, and workpiece
placement, according to required machining sequence
h Monitored machine operation and control panel displays to detect malfunctions and compare
readings to specifications
h Cleaned machine, tooling, and parts, using solvent and solution and rag
h Prepared geometric layout from graphic displays, using computer-assisted drafting software and
drafting instruments and graph paper
h Wrote instruction sheets, cutter listed, and machine instructions programs to guide setup and
encode numerical control tape
h Analyzed drawings, specifications, printed circuit board pattern film, and design data to calculate
dimensions, tool selection, machine speeds, and feed rates
h Determined reference points, machine cutting paths, and hole locations and computed angular and
linear dimensions, radii, and curvatures
h Compared encoded tape and computer printout with original program sheet to verify accuracy of
instructions
h Drew machine tool paths on pattern film, using colored markers and following guidelines for tool
speed and efficiency

4. h Directed and coordinate the activities of employees engaged in production and processing of
goods
h Planned and established work schedules, assignments, and production sequences, to meet
production goals
h Calculated labor and equipment requirements and production specifications, using standard
formulas
h Determined standards, production and rates based on company policy, equipment and labor
availability, and workload
h Reviewed operations and accounting records and reports to determine the feasibility of production
estimates and evaluate current production
h Conferred with management and subordinates to resolve worker problems, complaints, and
grievances
h Conferred with other supervisors to coordinate operations and activities within departments and
between departments
h Read and analyzed charts, work ordered, and production schedules to determine production
requirements
h Maintained operations data, such as time, production, and cost records and prepared
management reports
h Requisitioned materials, supplies, equipment parts, and repair services
h Interpreted specifications, blueprints, job ordered, and company policies and procedures for
workers
h Inspected materials, products, and equipment to detect defects and malfunctions
h Demonstrated equipment operations and work procedures to new employees and assigned
employees to experienced workers for training
h Monitor gauges, dials, and other indicators to ensure operators conform to production and
processing standards
h Set up and adjusted machines and equipment
h Recommended and implemented measures to motivate employees and improve production
methods, equipment performance, product quality, and efficiency
h Monitored and patrolled work area and enforced safety and sanitation regulations
h Welded metal parts and components together, using brazing, gas, and arc welding equipment
h Repaired broken and cracked parts, filled holes and increases size of metal parts, using welding
equipment
h Welded in flat, horizontal, vertical, and overhead position
h Cleaned and degreases parts, using wire brush, portable grinder, and chemical bath
h Inspected finished workpiece for conformance to specifications
h Chipped and ground off excess weld, slag, and spatter, using hand scraper and power chipper,
portable grinder, and arc-cutting equipment
h Positioned workpieces and clamps together and assembled in jigs and fixtures
h Management, Problem solving,Quality and Production minded, Meeting and exceeding production
goals and customer expectation.

5. h Knowledgable in all aspects of production from 5S to 100% on time shipment.
h I believe in being proactive, Not reactive. The best teams are coached by example, not lecture.