ICI Project 1

1. SCHOOL OF ARCHITECTURE, BUILDING & DESIGN
Research Unit for Modern Architecture Studies in Southeast Asia
Foundation of Natural and Built Environments
Introduction to Drawing (ARC 30103)
Prerequisite: None
Lecturers: Ida Mazlan, Normah Sulaiman (ITD)
Ann See Peng / Hasmanira (ICI)
_____________________________________________________________________
Project 1: Understanding Different types of Professions and Drawings in the Built Environment
20% Group Presentation
Presentation: 7th
May & 8th
May 2015 / CD submission: 15th
May 2015
Introduction
“I prefer drawing to talking. Drawings are faster and leave less room for lies. “
Le Corbusier
Objectives of Project
• To introduce drawing as a communication tool in the construction industry.
Learning Outcomes
• Interpret the type of drawing representation used in the construction industry
Tasks
This is an integrated project between Introduction to Drawing(ITD) ,Introduction to Construction
Industry (ICI)
In a group of five or six people, you are required to investigate type of drawings from ONE of the
profession below:
No Profession (ICI) Types of Drawing (ITD)
1 Architect Architectural Drawings
2 Interior Architect/Interior Designer Interior Architecture Drawings
3 Town Planner/Master Planner Planners Drawings
4 Product Designer (Furniture) Product Design Drawings
5 Quantity Surveyor Quantity Surveying Drawings –what do they refer to
6 Landscape Architect Landscape Architecture Drawings
7 Structural Engineer Structural Engineering Drawing
8 Electrical Engineer Electricals Drawings

2. (1)Introduction to Drawing (ITD) Task (20%)-GROUP
You are to research and investigate the use of the drawings as a means of communication. The data
gathered should include types and function of drawings, stages and examples of drawings used to
communicate ideas and presentations.
(2)Introduction to Construction Industry (ICI) Task (10%)-GROUP
You are to research and investigate the scope of work handled by them, their responsibilities and
tasks at different stages of construction.
Submission Requirement
Using the data gathered, you are to discuss and work as a team to generate a presentation slide which
includes item 1 and 2 listed in the TASKS section.
One or two of your team members will be communicating and presenting their findings to the class on
Presentation Day. You are advice to keep the presentation short (5 minutes per task) and simple using any
creative medium that best suits the content and findings for your audience.
Presentation Day
Date : 7th
May 2015 & 8th
May 2015
Time : TBC
Dress Code : Smart Casual
Presentation Flow: TBC
To ensure the span of presentation is used wisely, please follow these guidelines on presentation day to avoid
interruptions and delay of time.
1. The whole class presentation will be using ONE laptop throughout all presentation.
2. You are advice to transfer all softcopies of presentation materials into the laptop prior to class time.
3. Each group need to setup and record presentation using their OWN CAMERA or ONE camera using
different MEMORY CARD- for E-portfolio and CD submission
4. Please print the assessment sheet for each lecturer BEFORE the presentation
Post Presentation:
As a team, you are required to compile the following components in a CD:
1-Presentation slide
2-Video of your presentation
3-References (Optional)
All items above will be compiled by group leader in the CD with proper CD Casing with proper information such
as the title, module name, group members name and ID, and the name of your respective tutor. CDs must
reach module coordinator by the next class session. (15th
May 2015).

3. Assessment criteria
The assessment for this assignment will be based on:
• demonstrated understanding of brief
• content
• creativity and clarity
Marking criteria
Marks shall be distributed as follows:
Work will be assessed based on (Introduction to Drawing):
TGC
Acquired
Assessment Criteria Marks %
Group Component
Demonstrated understanding of brief
5%
Content
10%
Creativity and clarity of presentation
5%
(Refer assessment sheet for detail breakdown)TOTAL 20%
NOTE: PLEASE BE INFORMED THAT INVIDUAL COMPONENTS IN GROUP WORKS IS EVALUATED BASED
ON PEER EVALUATION AND INSTRUCTUR’S EVALUATION ON INDIVIDUAL PERFORMANCE OF A GROUP
MEMBER.
Suggested References