natural convection

1. Chapter 9
NATURAL CONVECTION
Mehmet Kanoglu
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
Heat and Mass Transfer, 3rd Edition
Yunus A. Cengel
McGraw-Hill, New York, 2007

2. 2
Objectives
• Understand the physical mechanism of natural
convection
• Derive the governing equations of natural convection,
and obtain the dimensionless Grashof number by
nondimensionalizing them
• Evaluate the Nusselt number for natural convection
associated with vertical, horizontal, and inclined plates
as well as cylinders and spheres
• Examine natural convection from finned surfaces, and
determine the optimum fin spacing
• Analyze natural convection inside enclosures such as
double-pane windows.
• Consider combined natural and forced convection, and
assess the relative importance of each mode.

3. 3
PHYSICAL MECHANISM OF NATURAL CONVECTION
Many familiar heat transfer applications involve natural convection as the primary
mechanism of heat transfer. Examples?
Natural convection in gases is usually accompanied by radiation of comparable
magnitude except for low-emissivity surfaces.
The motion that results from the continual replacement of the heated air in the
vicinity of the egg by the cooler air nearby is called a natural convection current,
and the heat transfer that is enhanced as a result of this current is called natural
convection heat transfer.
The cooling of a boiled egg in a cooler
environment by natural convection.
The warming
up of a cold
drink in a
warmer
environment
by natural
convection.

4. 4
Buoyancy force: The upward force exerted by a fluid on a body completely or
partially immersed in it in a gravitational field. The magnitude of the buoyancy
force is equal to the weight of the fluid displaced by the body.
The net vertical force acting on a body
Archimedes’ principle: A body
immersed in a fluid will experience
a “weight loss” in an amount equal
to the weight of the fluid it
displaces.
It is the buoyancy force that keeps the
ships afloat in water (W = Fbuoyancy for
floating objects).
The “chimney effect” that induces
the upward flow of hot combustion
gases through a chimney is due
to the buoyancy effect.

5. 5
The coefficient of volume expansion
is a measure of the change in
volume of a substance with
temperature at constant pressure.
Volume expansion coefficient: Variation of
the density of a fluid with temperature at
constant pressure.
ideal gas
The larger the temperature
difference between the fluid adjacent
to a hot (or cold) surface and the
fluid away from it, the larger the
buoyancy force and the stronger the
natural convection currents, and thus
the higher the heat transfer rate.

6. 6
Isotherms in natural convection
over a hot plate in air.
In natural convection, no blowers are used, and
therefore the flow rate cannot be controlled externally.
The flow rate in this case is established by the dynamic
balance of buoyancy and friction.
An interferometer produces a
map of interference fringes,
which can be interpreted as
lines of constant temperature.
The smooth and parallel lines
in (a) indicate that the flow is
laminar, whereas the eddies
and irregularities in (b) indicate
that the flow is turbulent.
The lines are closest near the
surface, indicating a higher
temperature gradient.

7. 7
EQUATION OF MOTION AND THE GRASHOF NUMBER
Typical velocity and temperature
profiles for natural convection
flow over a hot vertical plate at
temperature Ts inserted in a fluid
at temperature T¥.
The thickness of the boundary layer
increases in the flow direction.
Unlike forced convection, the fluid
velocity is zero at the outer edge of the
velocity boundary layer as well as at the
surface of the plate.
At the surface, the fluid temperature is
equal to the plate temperature, and
gradually decreases to the temperature
of the surrounding fluid at a distance
sufficiently far from the surface.
In the case of cold surfaces, the shape
of the velocity and temperature profiles
remains the same but their direction is
reversed.

8. 8
Forces acting on a differential
volume element in the natural
convection boundary layer
over a vertical flat plate.
This is the equation that governs the fluid motion
in the boundary layer due to the effect of
buoyancy. The momentum equation involves the
temperature, and thus the momentum and
energy equations must be solved simultaneously.
Derivation of the
equation of motion
that governs the
natural convection
flow in laminar
boundary layer

9. 9
The Grashof Number
The governing equations of natural convection and the boundary conditions
can be nondimensionalized by dividing all dependent and independent variables
by suitable constant quantities:
Substituting them into the momentum equation and simplifying give
Grashof number: Represents
the natural convection effects in
momentum equation

10. 10
The Grashof number Gr is a
measure of the relative
magnitudes of the buoyancy
force and the opposing viscous
force acting on the fluid.
• The Grashof number provides the main criterion in determining whether the
fluid flow is laminar or turbulent in natural convection.
• For vertical plates, the critical Grashof number is observed to be about 109.
When a surface is subjected to external
flow, the problem involves both natural
and forced convection.
The relative importance of each mode of
heat transfer is determined by the
value of the coefficient Gr/Re2:
• Natural convection effects are
negligible if Gr/Re2 << 1.
• Free convection dominates and the
forced convection effects are negligible
if Gr/Re2 >> 1.
• Both effects are significant and must
be considered if Gr/Re2 » 1.

11. 11
NATURAL CONVECTION OVER SURFACES
Natural convection heat transfer on a surface depends on the geometry of the
surface as well as its orientation. It also depends on the variation of temperature
on the surface and the thermophysical properties of the fluid involved.
With the exception of some simple cases, Heat transfer relations in natural
convection are based on experimental studies.
Natural convection heat
transfer correlations are
usually expressed in terms of
the Rayleigh number raised
to a constant n multiplied by
another constant C, both of
which are determined
experimentally.
Rayleigh
number
The constants C and n depend on the
geometry of the surface and the flow
regime, which is characterized by the
range of the Rayleigh number.
The value of n is1/4 usually for laminar
flow and 1/3 for turbulent flow.
All fluid properties are to be evaluated
at the film temperature Tf = (Ts + T¥)/2.

12. 12

13. 13

14. 14
Vertical Plates (qs = constant)
The relations for isothermal plates in the table can also be used for plates
subjected to uniform heat flux, provided that the plate midpoint temperature TL / 2
is used for Ts in the evaluation of the film temperature, Rayleigh number, and the
Nusselt number.
Inclined Plates
Natural convection flows on the
upper and lower surfaces of an
inclined hot plate.
In a hot plate in a cooler environment for
the lower surface of a hot plate, the
convection currents are weaker, and the
rate of heat transfer is lower relative to the
vertical plate case.
On the upper surface of a hot plate, the
thickness of the boundary layer and thus
the resistance to heat transfer decreases,
and the rate of heat transfer increases
relative to the vertical orientation.
In the case of a cold plate in a warmer
environment, the opposite occurs.

15. 15
Horizontal Plates
Natural convection flows on
the upper and lower surfaces
of a horizontal hot plate.
For a hot surface in a cooler
environment, the net force acts
upward, forcing the heated fluid to rise.
If the hot surface is facing upward, the
heated fluid rises freely, inducing
strong natural convection currents and
thus effective heat transfer.
But if the hot surface is facing
downward, the plate blocks the heated
fluid that tends to rise, impeding heat
transfer.
The opposite is true for a cold plate in
a warmer environment since the net
force (weight minus buoyancy force) in
this case acts downward, and the
cooled fluid near the plate tends to
descend.

16. 16
Horizontal Cylinders and Spheres
Natural convection
flow over a
horizontal hot
cylinder.
The boundary layer over a hot horizontal
cylinder starts to develop at the bottom,
increasing in thickness along the
circumference, and forming a rising plume at
the top.
Therefore, the local Nusselt number is
highest at the bottom, and lowest at the top of
the cylinder when the boundary layer flow
remains laminar.
The opposite is true in the case of a cold
horizontal cylinder in a warmer medium, and
the boundary layer in this case starts to
develop at the top of the cylinder and ending
with a descending plume at the bottom.

17. 17

18. 18
NATURAL CONVECTION FROM FINNED SURFACES AND PCBs
Natural convection flow
through a channel
between two isothermal
vertical plates.
The plates could be the fins of a finned heat
sink, or the PCBs of an electronic device.
The plates can be approximated as being
isothermal (Ts = constant) in the first case, and
isoflux (qs = constant) in the second case.
Boundary layers start to develop at the lower
ends of opposing surfaces, and eventually
merge at the midplane if the plates are vertical
and sufficiently long. In this case, we will have
fully developed channel flow after the merger of
the boundary layers, and the natural convection
flow is analyzed as channel flow.
But when the plates are short or the spacing is
large, the boundary layers of opposing surfaces
never reach each other, and the natural
convection flow on a surface is not affected by
the presence of the opposing surface. In that
case, the problem should be analyzed as natural
convection from two independent plates in a
quiescent medium.

19. 19
Natural Convection Cooling of Finned Surfaces (Ts = constant)
Finned surfaces of various shapes, called heat sinks, are frequently used in the
cooling of electronic devices.
Energy dissipated by these devices is transferred to the heat sinks by conduction
and from the heat sinks to the ambient air by natural or forced convection,
depending on the power dissipation requirements.
Natural convection is the preferred mode of heat transfer since it involves no
moving parts, like the electronic components themselves.
for vertical isothermal
parallel plates
Characteristic lengths
S fin spacing or
L fin height
Heat sinks with (a) widely spaced and
(b) closely packed fins.
Widely spaced: Smaller surface area but
higher heat transfer coefficient
Closely packed: Higher surface area but
smaller heat transfer coefficient
There must be an optimum spacing that
maximizes the natural convection heat
transfer from the heat sink.

20. 20
Various dimensions
of a finned surface
oriented vertically.
All fluid properties are to be
evaluated at the average
temperature Tavg = (Ts + T¥)/2.
When the fins are essentially isothermal and the fin thickness t is small relative
to the fin spacing S, the optimum fin spacing for a vertical heat sink is

21. 21
Natural Convection Cooling of Vertical PCBs (qs = constant)
Arrays of printed circuit boards used in electronic systems can often be modeled as
parallel plates subjected to uniform heat flux. The plate temperature in this case
increases with height, reaching a maximum at the upper edge of the board.
Arrays of vertical printed
circuit boards (PCBs) cooled
by natural convection.
All fluid properties are to be
evaluated at the average
temperature Tavg = (Ts + T¥)/2.
number of plates
The critical surface TL that occurs at the
upper edge of the plates is determined from

22. 22
Mass Flow Rate through the Space between Plates
The magnitude of the natural convection heat transfer is directly related to
the mass flow rate of the fluid, which is established by the dynamic balance
of two opposing effects: buoyancy and friction.
The fins of a heat sink introduce both effects: inducing extra buoyancy as a
result of the elevated temperature of the fin surfaces and slowing down the
fluid by acting as an added obstacle on the flow path. As a result,
increasing the number of fins on a heat sink can either enhance or reduce
natural convection, depending on which effect is dominant.
The buoyancy-driven fluid flow rate is established at the point where these
two effects balance each other.
The friction force increases as more and more solid surfaces are
introduced, seriously disrupting fluid flow and heat transfer. Heat sinks with
closely spaced fins are not suitable for natural convection cooling.
When the heat sink involves widely spaced fins, the shroud does not
introduce a significant increase in resistance to flow, and the buoyancy
effects dominate. As a result, heat transfer by natural convection may
improve, and at a fixed power level the heat sink may run at a lower
temperature.

23. 23
NATURAL CONVECTION INSIDE ENCLOSURES
Enclosures are frequently encountered in practice, and heat transfer through them
is of practical interest. In a vertical enclosure, the fluid adjacent to the hotter
surface rises and the fluid adjacent to the cooler one falls, setting off a rotationary
motion within the enclosure that enhances heat transfer through the enclosure.
Convective currents in a
vertical rectangular
enclosure.
Convective currents
in a horizontal
enclosure with (a)
hot plate at the top
and (b) hot plate at
the bottom.
Ra > 1708, natural
convection currents
Ra > 3´105, turbulent
fluid motion
Nu = 1
Fluid properties at
Lc charecteristic length: the distance between the hot
and cold surfaces,
T1 and T2: the temperatures of the hot and cold surfaces

24. 24
Effective Thermal Conductivity
A Nusselt number of 3 for an enclosure
indicates that heat transfer through the
enclosure by natural convection is three
times that by pure conduction.
effective thermal
conductivity
The fluid in an enclosure behaves like
a fluid whose thermal conductivity is
kNu as a result of convection currents.
Nu = 1, the effective thermal
conductivity of the enclosure is equal
to the conductivity of the fluid. This
case corresponds to pure conduction.
Numerous correlations for the Nusselt
number exist. Simple power-law type
relations in the form of Nu = CRan,
where C and n are constants, are
sufficiently accurate, but they are
usually applicable to a narrow range of
Prandtl and Rayleigh numbers and
aspect ratios.

25. 25
Horizontal Rectangular Enclosures
A horizontal rectangular
enclosure with
isothermal surfaces.
When the hotter plate
is at the top, Nu = 1.
For horizontal enclosures that
contain air, These relations can
also be used for other gases with
0.5 < Pr < 2.
For water, silicone
oil, and mercury
Based on experiments with air. It may be used for liquids with
moderate Prandtl numbers for RaL < 105.
[ ]+ only positive
values to be used

26. 26
Inclined Rectangular Enclosures
An inclined rectangular enclosure
with isothermal surfaces.

27. 27
Vertical
Rectangular
Enclosures
A vertical rectangular
enclosure with
isothermal surfaces.

28. 28
Concentric Cylinders
The rate of heat transfer through the
annular space between the cylinders
by natural convection per unit length
Characteristic length
Two concentric horizontal
isothermal cylinders.
For FcylRaL < 100, natural convection
currents are negligible and thus keff = k.
Note that keff cannot be less than k, and
thus we should set keff = k if keff/k = 1.
The fluid properties are evaluated at the
average temperature of (Ti + To)/2.
the geometric factor for
concentric cylinders

29. 29
Concentric Spheres
Characteristic length
Two concentric
isothermal spheres.
If keff /k < 1, we should set keff = k.

30. 30
Combined Natural Convection and Radiation
Gases are nearly transparent to radiation, and thus heat transfer through a
gas layer is by simultaneous convection (or conduction) and radiation.
Radiation is usually disregarded in forced convection problems, but it must be
considered in natural convection problems that involve a gas. This is especially
the case for surfaces with high emissivities.
s = 5.67 ´ 108 W/m2×K4
Stefan–Boltzmann constant
Radiation heat transfer from a surface at temperature Ts surrounded by
surfaces at a temperature Tsurr is
Radiation heat transfer between two large parallel plates is
When T¥ < Ts and Tsurr > Ts, convection and
radiation heat transfers are in opposite
directions and subtracted from each other.

31. 31

32. 32

33. 33
COMBINED NATURAL AND FORCED CONVECTION
In assisting flow, natural convection assists forced convection and
enhances heat transfer. Example: upward forced flow over a hot
surface.
In opposing flow, natural convection resists forced convection and
decreases heat transfer. Example: upward forced flow over a cold
surface.
In transverse flow, the buoyant motion is perpendicular to the forced
motion. Transverse flow enhances fluid mixing and thus enhances heat
transfer. Example: horizontal forced flow over a hot or cold cylinder or
sphere.
where Nuforced and Nunatural
are determined from the
correlations for pure forced
and pure natural convection,
respectively.

34. 34
Summary
• Physical Mechanism of Natural Convection
• Equation of Motion and the Grashof Number
• Natural Convection Over Surfaces
ü Vertical Plates (Ts = constant), (qs = constant)
ü Vertical Cylinders
ü Inclined Plates
ü Horizontal Plates
ü Horizontal Cylinders and Spheres
• Natural Convection from Finned Surfaces and PCBs
ü Natural Convection Cooling of Finned Surfaces (Ts = constant)
ü Natural Convection Cooling of Vertical PCBs (qs = constant)
ü Mass Flow Rate through the Space between Plates
• Natural Convection Inside Enclosures
ü Effective Thermal Conductivity
ü Horizontal Rectangular Enclosures
ü Inclined Rectangular Enclosures
ü Vertical Rectangular Enclosures
ü Concentric Cylinders and spheres
ü Combined Natural Convection and Radiation