2. Process
• At the start of
doing my project, I
used Premier Pro
to edit my audio,
however, it didn’t
work properly, so I
ended up using
Adobe Audition.
3. Process
• Once I was in Adobe
Audition, I had no
idea what I was
doing, so I looked
online for a tutorial
on how to make a
piece of audio sound
like old timey radio. I
found one on
YouTube.
4. Process
• I learned that to
make something
sound like old timey
radio, I had to use
filters. The filters I
used were
• A) Parametric
Equalizer (Old Timey
Radio)
• B) FFT Filter (On
Hold EQ)
5. Process
• I was originally going
to have sounds of
artillery and gunfire in
the background,
however I thought it
would be a bit
inappropriate.
• I put together two one
hour clips of these
sounds and it sounded
immersive, almost as if
I was there.
6. Process
• To save my file as an
mp4, I had to have a
video. I decided that I
would just use a test
card (after an hour of
searching what it was
called) for the whole
thing as the unit is
based on audio.
7. Process
• I put a black and white
filter on the test card
and put a little logo of
a skull and crossbones
(the crossbones are
two little lightning
bolts) with a brodie
helmet.
• I also put VPR,
standing for Vengance
Pirate Radio.
8. Process
• To start with my actual audio, I
had to record me reading my
script. The recorder actually
picked up me turning the paper
of my script over, so I had to
cut that out.
• I recorded about 2 or 3 takes,
but it turned out the first one
was completely fine.
• Once I put the audio in
Audition, I put the filters which
I mentioned before on it.
9. Process
• I added in a bunch of
vinyl popping sounds
that I had
downloaded from
the internet to make
it sound a bit more
authentic.
10. Process
• I started to add in clips of
music, taken from the Battle of
Britain soundtrack, to give my
newscast a British Pathé feel.
This was decided after doing
some research on their videos.
• I added key frames onto most
of the music to turn it down. I
had it fading out at the start. I
also made my voice louder
using key frames.
• Once I had each clip of audio, I
put the same old timey filters
on that I had put on my voice. I
had saved it as a preset.
11. Process
• At the end of it all, I
move the edited mp3
file of my recording
into Premier Pro and
put the picture I had
previously edited on
top.
• I then exported it as
an mp4 file.
Editor's Notes
Discuss the tools and processes used in your production. Log your thoughts and feelings about your work.
Discuss the tools and processes used in your production. Log your thoughts and feelings about your work.
Discuss the tools and processes used in your production. Log your thoughts and feelings about your work.
Discuss the tools and processes used in your production. Log your thoughts and feelings about your work.
Discuss the tools and processes used in your production. Log your thoughts and feelings about your work.