Anubhav Sinha is seeking a senior engineer position where he can utilize over 5 years of experience in engine performance and OBD calibration. He has worked as a senior engineer at Cummins, leading projects to improve fuel economy and lower emissions. Prior to Cummins, he worked as an engineer at Caterpillar and Tata Autocomp Systems. He has a Master's degree in mechanical engineering from Wayne State University.
1. A N U B H A V S I N H A
2890 Parkview Dr, Columbus, IN 47201
E-mail: anubhav.sinha1983@gmail.com Ph: 313-515-4937
O B J E C T I V E
I aim to obtain the position of a Senior Engineer in a firm where I can fully utilize my talents, knowledge,
expertise, proficiency and excellent communication and inter-personal skills for the benefit of the firm.
H I G H L I G H T S O F A C H I E V E M E N T
• 5 years and 8 months’ Work Experience as Engine Performance and OBD Calibration Engineer
• Worked as a Senior Engine Performance/OBD Calibration Engineer for Cummins Engine
Testing and Development facility in Columbus, Indiana from July 2011-December 2015.
• Worked as an Engine Performance/Calibration Engineer for Volt Workforce Solution at
Caterpillar’s Engine Testing and Development facility in Peoria, Illinois from April 2010-June 2011.
• Successfully led emissions calibration work by optimizing engine control maps to improve fuel
economy by 5% while lowering engine out PM by 40% and met EPA emission requirements to certify
Cummins 5LV8 light duty diesel engine for 2016 Nissan pickup truck.
• Successfully led team of people and completed various OBD projects within specified timeframe to
meet program launch deadline.
• Successfully implemented six sigma processes and coached teams to implement them that lead to cost
savings for Cummins and their customers.
P R O F E S S I O N A L E X P E R I E N C E
Worked as Senior Engineer – Engine/OBD Calibration at Cummins with the following
duties and responsibilities: July 2011- Dec 2015
• Successfully Calibrated Engine performance, fuel economy and emissions for EPA emission
certification. Effectively presented results, trends and ideas to customers.
• Successfully Calibrated multiple OBD monitors in test cell and on trucks to complete OBD
certification process for ARB.
• Organized and led OBD forums to commonize and resolve issues across various engine platforms.
• Planned, scheduled and led multiple engine testing plans for various cross functional group and
customers. Led Emission Precertification and OBD Certification testing process for multiple engine
platforms.
• Documented multiple technical reports to summarize and standardize certain critical workflow to
help the technical community within Cummins.
• Documented and submitted AECD documents for EPA and ARB.
• Lead vehicle testing under different weather and altitude conditions to address vehicle drivability
issues and customer complaints
• Responsible for multiple test cell activities in a Steady state and Transient certification test cells.
• Improved test cell efficiency by putting processes in place to reduce downtime. Assisted with test cell
and vehicle troubleshooting.
• 6 Sigma trained and implemented six sigma projects to improve process effectiveness.
Worked as Engine Performance/Calibration Engineer for Volt (at Caterpillar) with the
following duties and responsibilities:
April 2010- June 2011
• Worked on Heavy duty engines for completing Tier 3 Certification process.
2. • Optimized engine control maps and strategies and perform engine simulation / data matching to
ensure data quality to meet EPA emission standards.
• Planned and organized multiple test cell activities on daily basis and directed other team members in
the execution of these test activities.
• Applied engine simulation techniques to optimize fuel system, air system, and other performance
related systems.
• Evaluated new engine concepts via simulation and/or test.
• Assisted with engine and test cell problem resolution.
• Improved the rating development process and conduct ratings reviews with customer
TATA Autocomp Systems Limited, Pune, India September 2006-May 2007
Mechanical Engineer
• Responsible for products quality and on-time delivery for key customers (Honeywell, Borg Warner,
Jaguar, TATAMotors)
• Optimized manufacturing process at vendor locations to achieve 20% improvement in production
output.
• Improved drawing clarity to ensure reduction in defects with key vendors
R E S E A R C H W O R K A T W A Y N E S T A T E U N I V E R S I T Y
Mechanical Engineering Department
Worked in the Center of Automotive Research on research projects listed below:
• Effect of different Biodiesel blends on Auto ignition, Combustion, Performance and Engine-Out
Emissions in a Single Cylinder HSDI Diesel Engine.
• Found and documented the impact of biodiesel and other alternative on the Diesel particulate
emissions and NOx emissions on a Single Cylinder HSDI Diesel Engine.
EDUCATION
Wayne State University Detroit, MI
• Master of Science in Mechanical Engineering, Aug 2010 Overall GPA-3.52/4.0
• Relevant Coursework: Combustion Engines, Heat and Mass Transfer, Combustion and Emissions,
Advanced Combustion and Emissions 1&2, and Robust Design, Directed Study
• Main Author for technical paper 2010-01-0798 in SAE 2010 World Congress and Exhibition with
title “Effect of Biodiesel and its blend on Particulate Emissions from HSDI diesel
engine”.
• C0-Author for technical paper 2010-01-1123 in SAE 2010 World Congress and Exhibition with title
“Comparison between Combustion and Emissions using JP8 and ULSD Fuels in a
Single-Cylinder Diesel Engine”.
• Master’s Dissertation under the guidance of Prof. N.A Henein on “Effect of different fuel
properties of ULSD, JP-8 and Biodiesel on Particulate Emissions from HSDI diesel
engines”.
Pune University Pune, India
Bachelor of Engineering, Mechanical Engineering June 2006
T E C H N I C A L S K I L L S
• Software Matlab & Simulink, Concerto, Minitab, MS Office, Diadem, Cyber Cal, Vector
Canape, Calterm, ANOVA.
• Operating System Windows 2000/98/XP, Vista, Windows8