1. CURRICULUM VITAE
SURNAME / NAME: Sesto Antonio
DATE OF BIRTH (dd/mm/yyyy): 11/10/1980
PLACE OF BIRTH: Vibo Valentia (VV)
NATIONALITY: Italian
EDUCATION: Technical high school graduation
MOTHER LANGUAGE: Italian
SPOKEN LANGUAGES: English – French - Spanish
TELEPHONE N. : +39 3391534048
E- MAIL ID : antoniosesto@virgilio.it
Senior Rotating Equipment Engineer
1. Main Management Competences
• Site Management Lead, in construction and maintenances project.
• Material management, cross check between packing list and bill of material to match with the
SOW and drawings, issue of site as built when required.
• Maintain the high standard requirements and apply HSE procedure according golden rules.
• Planning, schedule and achieving goals in project execution, cost control and set up of
logistic requirements.
• Work as interface with Project, construction and Engineering Management, update constantly
by reporting to the company with the project status and keeping track of evidence through
minute of meeting , quality check sheet, daily/weekly report.
• Focus on project set up, by means of job hazard analysis, method statement, certification
check to be in compliance with project requirements and standards’.
• Verify and share all Technical procedure TPI/TPS/WI with the field discipline, and follow full
time the site activities and execution of projects.
• Maintain good relation with workers, labors, managements as a team role.
• Accomplish in time manner all the technical training and update assigned by the Employers.
2. Main Technical competence
• Geometrical and dimensional check of foundation, rotating equipment and auxiliaries
skids positioning, leveling and alignment.
• Installation/Erection activity, Maintenance, Troubleshooting, process review,
instrument and control system activity.
• Material check, Quality control QA/QC managing, Material handling.
• Pre-commissioning and commissioning of oil system, air system, seal gas system,
ant surge system; Team working with Instrument Engineer during pre-
commissioning and commissioning activity, calibration and set-up of compressor
electrical and instrumentation (such as vibration probes, temperature elements, I/P
converters, Pressure Transmitters, Temperature transmitters, heater, Air Cooler, HMI
set up, white test and performance test ).
• Carry out of Minor Inspection – Medium and Major Inspection.
• Carry out mechanical repairs and carry out any machine works at the machine tools
in the workshop.
• Mill writer.
Page 1 of 9 C.V.: ANTONIO SESTO
Questo è un CAPPELLO
descrittivo dell’expertise.
Sostituire di volta in volta
con quello apropriato che può
comunque essere
personalizzato
Q
u
e
s
t
o
è
l
’
e
l
e
n
c
o
d
e
2. Revamping and survey activities
• Trainer for new hire on request.
• Always in challenge in order to offer to the client and to the company the best
reliability performance, applying the best practice and excellence for our products.
1. Spoken and written language.
• Italian (mother tongue)
• English good level spoken and written
• French good level spoken
• Spanish work level spoken
WORK EXPERIENCES RECORD
Dates March 2014 – Up to now
Company Shell Gas BV Iraq
Customer BGC
Site Basra all BGC Field
Duties Rotating Equipment Engineer, Mechanical and static Equipment
Construction Site Lead
Equipment Compressor stations rehab, pipe line and static equipment
Dates January 2014 – February 2014
Company GE Oil & Gas Nuovo Pignone
Customer Eni Taranto/Gagliano and Bronte
Site Eni Refinery / Gagliano Gas station, Bronte Gas Station
Duties Damage inspection, Revamping and Major Overhauls, Alignment and start
up
Equipment Reciprocating Compressors 1 Unit type 4HE/4-2
3 Unit type 2SHM/2 and 1 Unit 2 HE/2
Dates February 2013 – November 2013
Company GE Oil & Gas Nuovo Pignone
Customer Eni Congo/ Perenco
Site Kitina / Likouala platform
Duties Maintenance, Start-up / Revamping survey
Equipment Reciprocating Compressors 2 Unit type SHM/3
1 Unit type 4SHMB/2 / 3 Unit 4HM/2
Dates January 2013 – Up to February 2013
Company GE Oil & Gas Nuovo Pignone
Customer Reficar/ CB&I
Site Cartagena Refinery Expansion Project
Page 2 of 9 C.V.: ANTONIO SESTO
l
e
e
s
p
e
r
i
e
n
z
e
s
i
g
n
i
f
i
c
a
t
i
v
e
i
n
o
r
d
i
n
e
c
r
o
n
o
l
o
g
i
c
o
d
e
c
r
e
s
c
e
n
t
e
3. Duties Erection
Equipment Reciprocating Compressors 1Unit type OA/1
Dates May 23 2012 – Up December 2012
Company GE Oil & Gas Nuovo Pignone
Customer Eni Congo Pointe Noire
Site Offshore all site and on shore
Duties Technical assistance – Maintenance – Troubleshooting
Equipment Reciprocating Compressors 1Unit type 4SHMB/2; and 2 Unit type 6SHM/3
Dates April 18th 2012 – May 23rd
2012
Company GE Oil & Gas Nuovo Pignone
Customer Total E&P Congo Pointe Noire
Site Offshore Platform Sendji
Duties Troubleshooting – Major Inspection and Start-up
Equipment Reciprocating compressor type 6HM/3
Dates March 12th 2012 – March 24th 2012
Company GE Oil & Gas Nuovo Pignone
Customer Perenco -Congorep /PNR Congo
Site Offshore platform Likouala
Duties Major Inspection and Start-up
Equipment Reciprocating compressor type 4HM/2
Dates January 2012 – March 2012
Company GE Oil & Gas Nuovo Pignone
Customer Eni Congo Pointe Noire
Site Offshore all site and on shore
Duties Technical assistance
Equipment Reciprocating Compressors 1Unit type 4SHMB/2; and 2 Unit type 6SHM/3
Dates August 2011 – December 2011
Company GE Oil & Gas Nuovo Pignone
Customer Eni Congo Pointe Noire
Site Offshore all site and on shore
Duties Technical assistance
Equipment Reciprocating Compressors 1Unit type 4SHMB/2; and 2 Unit type 6SHM/3
Page 3 of 9 C.V.: ANTONIO SESTO
4. Dates January 2011 – July 2011
Company GE Oil & Gas Nuovo Pignone
Customer Larsen & Toubro India
Site MRPL Refinery Phase III Mangalore
Duties Installation
Equipment Reciprocating compressors N°2 Unit Type 2HG/2 Series 2
Dates
November 2010 – Up to December 2010
Company GE Oil & Gas Nuovo Pignone
Customer Eni Congo
Site Kitina Platform – Pointe Noire
Duties Service assistance
Equipment Reciprocating compressors N°3 6SHM/3 and N°1 unit 4SHMB/2
Dates November 2010 – Up to November 2010
Company GE Oil & Gas Nuovo Pignone
Customer Gasunie Netherland
Site Groningen
Duties Installation
Equipment Reciprocating compressors N°1 6SHM/4
Dates January 2008 – Up to December 2010
Company GE Oil & Gas Nuovo Pignone
Customer Eni Congo
Site Kitina platform – Offshore Punta Nera Congo
Duties Installation – commissioning and start-up – Major Inspection
Equipment Reciprocating compressors N°2 6SHM/3 and N°1 4SHMB/2
Dates June 2006 –November 2007
Company GE Oil & Gas Nuovo Pignone
Customer TSKJ
Site Bonny Island NLNG plus project
Duties Installation and start Up on Train 6 – Medium and Major Inspection Carry
out on Train 1-4 and 5
Equipment Reciprocating compressors N°1 2HD/1, N°2 GT frame 7, N°2 GTG Frame 6,
N°2 Centrifugal compressor BCL and MCL, N°1 AN200 Axial Compressor
Page 4 of 9 C.V.: ANTONIO SESTO
5. Dates June 2006
Company GE Oil & Gas Nuovo Pignone
Customer Eni BV Gas Branch Libya Off Shore
Site Sabratha Platform- Libya
Duties Start up of the unit
Equipment Reciprocating compressors N°1 4SHMB/2
Dates May 2006
Company GE Oil & Gas Nuovo Pignone
Customer MCF Mangalore
Site MCF Plant in Mangalore-India
Duties Revamping and general Overhaul of the 1st
Unit – Diagnostic and
maintenance on the 2nd
Unit
Equipment Reciprocating compressor Type: N°2 Unit type 5HD/4
Dates March 2006 – March 2006
Company Basis Plant Services
Customer Eni BV Gas Branch Libya Off Shore
Site Sabratha Platform- Libya
Duties Overhaul of the cylinders, pistons, suction and discharge valves and vessels
- Start-up of the unit
Equipment Reciprocating compressors N°1 4SHMB/2
Dates January 2006 – February 2006
Company Basis Plant Services
Customer Eni
Site Livorno – Italia
Duties General Overhaul
Equipment Reciprocating compressors N°1 , 2HA/2 and n°1 2HC/2
Dates December 2004-November 2005
Company Basis Plant Services
Customer Technip Germany
Site Turkmenbusy-Turkemenistan
Duties Installation – commissioning and start up
Equipment Reciprocating compressors N°2 , 4HF/3
Page 5 of 9 C.V.: ANTONIO SESTO
6. Dates November –December 2004
Company Basis Plant Services
Customer Total Fina Elf
Site Kharyaga-Russia
Duties Preservation
Equipment Reciprocating compressors 2SHMB/2 , and N°1 6SHM/3
Dates October 2004
Company Basis Plant Services
Customer Ellenica Petroleum Grecia
Site Aspropyrgos Athens -Greece
Duties Revamping and Major Inspection
Equipment Reciprocating compressors N°2, 2HD/2 and N°1 Oc/1
Dates March 2004- September 2004
Company Basis Plant Services
Customer HHI & SAIPEM x AGIP BV Gas Branch Libya
Site HHI Ulsan- South Korea
Duties Erection and commissioning
Equipment Reciprocating compressors N°1, 4SHMB/2
Dates March 2004
Company Basis Plant Services
Customer Daewoo x Shell Nigeria
Site Porth Arcourt - Nigeria
Duties Positioning and Installation
Equipment Reciprocating compressors N°1, 2SHMB/2
Dates October 2003-December 2003
Company Basis Plant Services
Customer Blue water
Site Gorge Offshore (South Africa)
Duties Start up
Equipment Reciprocating compressors N°4, 6SHM/3 and N°1, 4SHMB/2
Dates September 2003
Company Basis Plant Services
Customer Total Fina Elf
Site Kharyaga- Russia
Page 6 of 9 C.V.: ANTONIO SESTO
7. Duties Grouting of Main Electric Motor , valves installation and pneumatic system
replacement
Equipment Reciprocating compressors N°1, 6SHM/3 and N°1, 2SHMB/1
Dates August2003- September 2003
Company Basis Plant Services
Customer Sever Tek - Luk Oil
Site South Shapkino- Russia
Duties Installations
Equipment Reciprocating compressors N°1 2SHMB/2
Dates August 2003
Company Basis Plant Services
Customer Raffinerie di Roma
Site Raffinerie di Roma -Fiumicino Italy
Duties Revamping and Major Inspection
Equipment Reciprocating compressor N°5 Unit
Dates July 2003
Company Basis Plant Services
Customer ABB Estense
Site Enichem - Ferrara Italy
Duties Major Inspection
Equipment N°6 Reciprocating compressors type 3HD/2 and 2HD/2
Dates April 2003- July 2003
Company Basis Plant Services
Customer Total Fina Elf
Site Kharyaga- Russie
Duties Erection completion and commissioning
Equipment Reciprocating Compressor N°1, 2SHMB/1 and N°1, 6SHM/3
Dates April 2003
Company Basis Plant Services
Customer ABB Polimeri
Site Enichem – Ferrara Italy
Duties Major Inspection
Equipment Reciprocating Compressor N°2, 3HD/2
Dates March 2003
Company Basis Plant Services
Customer Nuovo Pignone
Page 7 of 9 C.V.: ANTONIO SESTO
8. Site APT Pavia and Sala Prove Stabilimento di Firenze Italy
Duties APT course and certification- Revamping and start up
Equipment Reciprocating compressor N°1, 2HM/2
Dates December 2002- February 2003
Company Basis Plant Services
Customer Total Fina Elf
Site Usinsk- North Russian
Duties Erection and pre-commissioning
Equipment Reciprocating Compressor N°1 , 2SHMB/1 and N°1, 6SHM/3
Dates November 2002- December 2002
Company Basis Plant Services
Customer Nuovo Pignone
Site Sala Prove Stabilimento di Firenze Italy
Duties Major Inspection and Revamping
Equipment Reciprocating compressor 2HM
Dates October 2002
Company Basis Plant Services
Customer API SOI
Site Falconara Marittima- Italy
Duties Major Overhaul- Tutor presence
Equipment Reciprocating Compressor N°2- 2HA/2
Dates August 2002
Company Basis Plant Services
Customer Blue Water
Site Cape Town (South Africa)
Duties Mechanical completion - Tutor presence
Equipment Reciprocating Compressor N°1, 4SHMB/2 and N°4, 6SHM/3
Dates July 2002
Company Basis Plant Services
Customer AIR PRODUCT
Site Akzo Nobel (Netherland)
Duties Inspection 1500 hours, carry out some modifications-Tutor presence
Equipment Reciprocating Compressor 4HF/4
Page 8 of 9 C.V.: ANTONIO SESTO
9. Dates June 2002
Company Basis Plant Services
Customer BLUE WATER
Site Lerici (SP)-Italy
Duties Erection - tutor presence.
Equipment Reciprocating Compressor N°1, 4SHMB/2 and N°4, 6SHM/3
Dates November 21st
-2001/May 16th
-2002
Company Basis Plant Services
Customer AIR PRODUCT
Site Akzo Nobel (Netherland)
Duties Erection and commissioning - tutor presence.
Equipment Reciprocating Compressor N°1, 4HF/4
TRAININGS RECORD
All training assigned by GE Oil & Gas on My Learning program has been successfully completed.
Carry out of Site Leadership training.
APT Pavia, (OPITO – BOSIET – HOLF - H2S).
Others Occupations
From June 2000 up to November 2000 I was employ with Euro Control S.R.L., a specialized company on
NDT control and inspection.
Available to work overseas either based on family contract relocation.
Army service accomplished from April 2000 up to February 2001.
Page 9 of 9 C.V.: ANTONIO SESTO
10. Dates June 2002
Company Basis Plant Services
Customer BLUE WATER
Site Lerici (SP)-Italy
Duties Erection - tutor presence.
Equipment Reciprocating Compressor N°1, 4SHMB/2 and N°4, 6SHM/3
Dates November 21st
-2001/May 16th
-2002
Company Basis Plant Services
Customer AIR PRODUCT
Site Akzo Nobel (Netherland)
Duties Erection and commissioning - tutor presence.
Equipment Reciprocating Compressor N°1, 4HF/4
TRAININGS RECORD
All training assigned by GE Oil & Gas on My Learning program has been successfully completed.
Carry out of Site Leadership training.
APT Pavia, (OPITO – BOSIET – HOLF - H2S).
Others Occupations
From June 2000 up to November 2000 I was employ with Euro Control S.R.L., a specialized company on
NDT control and inspection.
Available to work overseas either based on family contract relocation.
Army service accomplished from April 2000 up to February 2001.
Page 9 of 9 C.V.: ANTONIO SESTO