More Related Content
Similar to cv_overview 2016
Similar to cv_overview 2016 (20)
cv_overview 2016
- 1. Curriculum Vitae
Damon Hughes Page 1 of 9 © 2016
Last name Hughes
First name Damon
Nationality British
Employer MHWirth UK Ltd
Current position Senior Service Engineer
Summary Over 14 years of experience with Aker MH MHWIRTH and enjoy the variety of my
job working with software and electrical systems i enjoy travelling and meeting new
people and new challenges.
Multi-disciplined in software control systems, electrical control and
instrumentation. Have knowledge and experience with mechanical and hydraulic
aspect of MHWirth equipment.
Supervisory experience with clients and other MHWirth employees to ensure a high
standard of work and competency in the people I work with.
Good team player able to work as part of a team or as an individual and learn from
previous experience to ensure continued improvement in my work.
Play and active role in Maintaining Aker MHWirth high level of HSE awareness and
implementation of just rules in my everyday life.
Reliable hard working employee with track record of long term flexibility and
commitment to employer.
Experience
July 2015 - p.t. E&I Lead Engineer, MHWirth UK LTD
Project: CAT D 4, Client: DSME
E&I Lead on CAT-D-4 Songa Enabler project
Responsible for guiding Electrical Team to ensure Quality control on all installation
and commissioning Phases of AKMHWIRTH Equipment.
Documentation control, Construction change Notifications (CCN) Input into system
update of progress in MIPS System.
Acquisition of technical data and drawings from WOSS.
Procurement of replacement parts using WOSS and SPS Dashboard to raise cases
and track delivery of parts.
Following MHWIRTH completions plan in timely manner to ensure project stays on
schedule.
- 2. Curriculum Vitae
Damon Hughes Page 2 of 9 © 2016
Attend meetings with Client and DSME as focal point for all E&L engineering issues.
Working with Product responsible to ensure any issues encountered by site team
are dealt with in a speedy and satisfactory way.
Maintain high focus on HSE procedures and carry out SJA / PTW and toolbox talks
with site team.
July 2015 - July 2015 Senior Service Engineer (software), MHWirth UK LTD
Project: Harding, Client: KCAD
Step 7 plc Upgrade. Carry out fault finding on s7 300 systems and rectify faults,
document all changes and report back to software contact point in Norway. carry
out full commissioning procedure on DDM system
February 2015 - June
2015
E&I Lead Engineer, MHWirth UK LTD
Project: CAT D 1, Client: DSME
E&I Lead on CAT-D-1 Songa Equinox project
Responsible for guiding Electrical Team to ensure Quality control on all installation
and commissioning Phases of AKMHWIRTH Equipment.
Documentation control, Construction change Notifications (CCN) Input into system
update of progress in MIPS System.
Acquisition of technical data and drawings from WOSS.
Procurement of replacement parts using WOSS and SPS Dashboard to raise cases
and track delivery of parts.
Following MHWIRTH completions plan in timely manner to ensure project stays on
schedule.
Attend meetings with Client and DSME as focal point for all E&L engineering issues.
Working with Product responsible to ensure any issues encountered by site team
are dealt with in a speedy and satisfactory way.
Maintain high focus on HSE procedures and carry out SJA / PTW and toolbox talks
with site team.
January 2015 - January
2015
Senior Service Engineer (software), MHWirth UK LTD
Project: Heather Alpha, Client: KCAD
PTD issues PTD stuck in hole consult over telephone and get rig back up and running
travel to rig and provide operational support, investigate incident. produce reset
procedures for rig crew and help train rig crew in operation of equipment
January 2015 - January
2015
Senior Service Engineer (software), MHWirth UK LTD
Project: Wilhunter, Client: Awilco
Survey for DDM and AHC S7 plc upgrade
- 3. Curriculum Vitae
Damon Hughes Page 3 of 9 © 2016
November 2014 -
December 2014
Senior Service Engineer (software), MHWirth UK LTD
Project: Central Azeri, Client: British Petroleum
10 Year Overhaul of all MHWIRTH equipment installation and tuning of Various
equipment
November 2014 -
November 2014
Senior Service Engineer (software), MHWirth UK LTD
Project: Captain A, Client: Archer
Step 7 plc software update and modification for DDM and trip tank data
November 2012 - October
2014
Senior Service Engineer (software), Aker MHWIRTH UK ltd
Project: West Chirag COP, Client: British Petroleum
COP project working In Construction Phase And Offshore Follow-up
Working With HMI System (Cimplicity / Drill View) also repair and installation of PC
equipment including Cyber chairs and MHWIRTH profibus/fiber networks
Panel Wiring And Alteration Of redline mark ups onsite
Liaising With Onsite Personnel During Commissioning To Ensure Completion.
Training Of Rig Crew With MHWirth Equipment Procedures And Operation.
Offshore assistance to rig crew including fault finding and rectification of faults on
all MHWIRTH equipment.
PLC monitoring and modification of all Aker MHWIRTH supplied drilling equipment
including Mud pumps and FTP systems integration,
completions for SCR and CCN paperwork.
August 2012 - October
2012
Service Engineer Senior, Aker MHWIRTH UK ltd
Project: Maersk Resilient, Client: Maersk
Training and offshore assistance on all MHWIRTH equipment on Rig full Drilling
Package control system and mechanical
March 2012 - July 2012 Service Manager, Aker MHWIRTH UK ltd
Cover service team lead position while lead on temporary leave.
Organize service team activities including man power planning.
Lease with clients to supply personnel for operational needs.
Organize visa for personnel as required.
Write and implement risk assessments for travel to high risk countries.
March 2011 - February
2012
E&I Lead Engineer, Aker MHWIRTH UK ltd
Project: Odebrecht 2,3, Client: DSME
E&I Lead on Odebrcht 2 and 3 Drillship projects.
Responsible for guiding Electrical Team to ensure Quality control on all installation
and commissioning Phases of AKMHWIRTH Equipment.
Documentation control, Construction change Notifications (CCN) Input into system
update of progress in MIPS System.
- 4. Curriculum Vitae
Damon Hughes Page 4 of 9 © 2016
Acquisition of technical data and drawings from WOSS.
Procurement of replacement parts using WOSS and SPS Dashboard to raise cases
and track delivery of parts.
Following MHWIRTH completions plan in timely manner to ensure project stays on
schedule.
Attend meetings with Client and DSME as focal point for all E&L engineering issues.
Working with Product responsible to ensure any issues encountered by site team
are dealt with in a speedy and satisfactory way.
Maintain high focus on HSE procedures and carry out SJA / PTW and toolbox talks
with site team.
June 2010 - March 2011 Service engineer Senior, Aker MHWIRTH UK ltd
Project: TMT 1,2 Odebrecht 1,2, Client: DSME
Service Engineer Senior on rotation on TMT 1 and TMT 2 transferred and worked on
Oderbrecht for 1 trip before returning to TMT Projects.
Writing and implementing changes in CCN system testing software and closing CCN
when testing done.
Software modifications carried out to QA21 software handling.
Successfully commissioned PDPH system including PLC and RMC Tuning carried out
all pre-commissioning procedures before carrying out commissioning of PDPH and
PDPH HPU with client witness.
Updated PDPH IOC screens on TMT 1 , 2 And Odebrecht 2.
Commissioning of MUD pump control system including PLC programming and
electrical alterations.
pre- commissioning and fault finding on FTP plc Software.
Checking Network connections and OLM setup in PLC.
CMC Air compressor skid testing and fault finding.
DCC IOC 1,2,3 updated software to both client and touch screens.
Load tests carried out on PDPH and Stand building arm.
RMC tuning of VPH system
June 2010 - June 2010 Service Engineer Senior, Aker MHWIRTH UK ltd
Project: BP Hardin, Client: British Petroleum
DDM PLC software modifications testing changes liase with software responsible.
run full DDM commissioning procedure
- 5. Curriculum Vitae
Damon Hughes Page 5 of 9 © 2016
May 2010 - May 2010 Service Engineer Senior, Aker MHWIRTH UK ltd
Project: Fugro Synergy, Client: Fugro
Fugro Synergy.
Commissioning of Standalone system PDPH radio controlled and TFM
Startup of Drill View server and project modification
RMC configuration and tuning to ensure smooth operation of radio controlled PDPH
commissioning of PDPH to Aker MHWIRTH Specifications
Fault finding of TFM Pipe Lifter Spare part ordered
March 2010 - March 2010 Service Engineer Senior, Aker MHWIRTH UK ltd
Project: Ensco 72, Client: Ensco
Service job. Control system
Rectify the following problems
1. No torque read out on drillers’ console (causing down time)
2. No speed readout on drillers’ console.
3. Torque valve on HPU 350bar system not functioning.
4. Torque DDM wrench not able to set value.
February 2010 - February
2010
Senior Service Engineer (software), Aker MHWIRTH UK ltd
Project: BP Hardin, Client: British Petroleum
Software modification to implement rotation interlock matrix as per product
bulletin.
install software and run thru commissioning procedure
February 2010 - February
2010
Service Engineer Senior, Aker MHWIRTH UK ltd
Project: Brent Alpha, Client: Seawell
Service Job Survey On HPU and associated pipework
Insulation resistance checks of motors visual inspection of any preservation carried
out and condition of switch gear in LIR.
Checking all paperwork for any maintenance or work carried out on system.
Visual inspections of pipe work on HPU and derrick hard pipe.
.
January 2010 - January
2010
Service Engineer Senior, Aker MHWIRTH UK ltd
Project: Chevron Alba North, Client: Shell Chevron
Service Job DDM 650 DC
- 6. Curriculum Vitae
Damon Hughes Page 6 of 9 © 2016
Software modification to DDM Plc for Throttle indication feedback
Purge system fault finding
December 2009 -
December 2009
Senior Service Engineer, Aker MHWIRTH UK ltd
Project: Stena Clyde, Client: Stena
working in workshop to power up DDM upgrade panel install software and run thru
pre commissioning checks on Panel
September 2009 -
December 2009
Senior Service Engineer (software), Aker MHWIRTH UK ltd
Project: Central Azeri, Client: British Petroleum
5 Year overhaul
.
July 2008 - July 2009 Senior Service Engineer (software), Aker MHWIRTH UK ltd
Project: East Azeri, Client: British Petroleum
Offshore Follow-up of all MHWIRTH Equipment
Working With HMI System (Cimplicity/Drillview) also repair and installation of PC
equipment including Cyber chairs and MHWIRTH profibus/fiber networks
Panel Wiring And Alteration Of redline mark ups onsite
Training Of Rig Crew With MHWirth Equipment Procedures And Operation.
Offshore assistance to rig crew including fault finding and rectification of faults on
all MHWIRTH equipment.
PLC monitoring and modification of all Aker MHWIRTH supplied drilling equipment
including Mud pumps Cement system, slurrification and FTP systems integration,
completions for SCR and CCN paperwork.
February 2005 - June
2008
Service Engineer, Aker MHWIRTH UK ltd
Project: West Azeri, Client: British Petroleum
west Azeri project working In Construction Phase And Offshore Follow-up
Working With HMI System (Cimplicity/Drillview) also repair and installation of PC
equipment including Cyber chairs and MHWIRTH profibus/fiber networks
Panel Wiring And Alteration Of redline mark ups onsite
Liaising With Onsite Personnel During Commissioning To Ensure Completion.
Training Of Rig Crew With MHWIRTH Equipment Procedures And Operation.
Offshore assistance to rig crew including fault finding and rectification of faults on
all MHWIRTH equipment.
PLC monitoring and modification of all Aker MHWIRTH supplied drilling equipment
including Mud pumps and FTP systems integration,
completions for SCR and CCN paperwork.
Panel Wiring And Alteration Of redline mark ups onsite
Liaising With Onsite Personnel During Commissioning To Ensure Completion.
Training Of Rig Crew With MHWIRTH Equipment Procedures And Operation.
Offshore assistance to rig crew including fault finding and rectification of faults on
all MHWIRTH equipment.
PLC monitoring and modification of all Aker MHWIRTH supplied drilling equipment
including Mud pumps and FTP systems integration,
completions for SCR and CCN paperwork.
February 2005 - February Service Engineer, Aker MHWIRTH UK ltd
- 7. Curriculum Vitae
Damon Hughes Page 7 of 9 © 2016
2005 Project: Statfjord A, Client: Statoil
Startup of Drillview and plc system for mud mix module commissioning of mud mix
module plc system and mechanically. Fault finding and rectification of any problems
in plc and Drillview
December 2004 -
December 2004
Service Engineer, Aker MHWIRTH UK ltd
Project: Borgland Dolpgin, Client: Dolphin Drilling
plc commissioning, DDM, Roughneck, Monkey Hand, Lower guiding Arm, Tubular
shuttle & equalizer and yoke on the hoisting system
June 2004 - November
2004
Service Engineer, Aker MHWIRTH UK ltd
Project: Central Azeri, Client: British Petroleum
Working during construction phase in Yard to offshore support commissioning of
Mud Pump PLC system and slurification.
Liaising With Onsite Personnel During Commissioning To Ensure Completion
completions for SCR and CCN paperwork.
June 2004 - June 2004 Service Engineer, Aker MHWIRTH UK ltd
Project: Stena Dee, Client: Stena
Modification of Medoc PLC program to allows extra gear selection due to upgrade
of DDM motors.
installation and commissioning of DDM
May 2004 - May 2004 Service Engineer, Aker MHWIRTH UK ltd
Project: Transocean Leader, Client: Transocean
Installation and commissioning of Eagle Light and HPU.
Flushing HPU and ensuring NAS class of oil. Downloading plc Program/
Change out of faulty moog valves
Testing of all wiring
September 2003 -
September 2003
Service Engineer, Offshore Follow-up of all MHWIRTH Equipment
Project: Transocean Searcher, Client: Transocean
DDM fault finding and rectification of Dolly issues for extend and retract
September 2003 -
September 2003
Service Engineer, Aker MHWIRTH UK ltd
Project: Regalia, Client: Prosafe
Commissioning AHC system including HPU also startup and commissioning pipe
handling machine
July 2003 - September
2003
Service Engineer, Aker MHWIRTH UK ltd
Project: Grane, Client: Norsk Hydro
Offshore Follow-up of all MHWIRTH Equipment
Working With HMI System (Cimplicity/Drillview) also repair and installation of PC
equipment including Cyber chairs and MHWIRTH profibus/fiber networks
Panel Wiring And Alteration Of redline mark ups onsite
Training Of Rig Crew With MHWirth Equipment Procedures And Operation.
Offshore assistance to rig crew including fault finding and rectification of faults on
all MHWIRTH equipment.
PLC monitoring and modification of all Aker MHWIRTH supplied drilling equipment
including Mud pumps Cement system, Slurification and FTP systems integration,
completions for SCR and CCN paperwork.
- 8. Curriculum Vitae
Damon Hughes Page 8 of 9 © 2016
April 2002 - July 2003 Service Engineer, Aker MHWIRTH UK ltd
Project: Valhall, Client: British Petroleum
working In Construction Phase And Offshore Follow-up of all MHWIRTH Equipment
Working With HMI System (Cimplicity/Drillview) also repair and installation of PC
equipment including Cyber chairs and MHWIRTH profibus/fiber networks
Panel Wiring And Alteration Of redline mark ups onsite
Liaising With Onsite Personnel During Commissioning To Ensure Completion.
Training Of Rig Crew With MHWIRTH Equipment Procedures And Operation.
Offshore assistance to rig crew including fault finding and rectification of faults on
all MHWIRTH equipment.
PLC monitoring and modification of all Aker MHWIRTH supplied drilling equipment
including Mud pumps Cement system, Slurification and FTP systems integration,
completions for SCR and CCN paperwork.
January 2002 - December
2002
Service Enginner, Aker MHWIRTH UK ltd
Project: Al White, Client: Noble
C service on DDM and Software modification
December 2002 -
December 2002
Service Engineer, Aker MHWIRTH UK ltd
Project: Bideford Dolphin, Client: Dolphin Drilling
Rewiring and upgrade of S5 plc system to S7 plc system on Iron Roughneck wiring
and pre-commissioning
November 2002 -
November 2002
Service Engineer, Aker MHWIRTH UK ltd
Project: West Alpha, Client: North Atlantic Drilling Ltd
Fault finding and rectification on Eagle Light Control system
January 2001 - October
2002
Service Engineer, Aker MHWIRTH UK ltd
Software control system modification instrumentation and electrical
Working On Service Jobs And On Projects In Construction Phase And Offshore
Follow-up
Working With HMI System (Cimplicity / Drillview) also repair and installation of PC
equipment including networks
Panel Wiring And Alteration Of Drawings using AutoCAD and redline mark ups
onsite
Liaising With Onsite Personnel During Commissioning To Ensure Completion.
Training Of Rig Crew With MHWirth Equipment Procedures And Operation.
Offshore assistance to rig crew including fault finding and rectification of faults on
all MHWIRTH equipment.
PLC monitoring and modification of all Aker MHWIRTH supplied drilling equipment
including cement and mud systems,
completions for SCR and CCN paperwork.
Working as part of a team in accident investigation
January 1996 - December
2001
E&I Technician, Pilkington Special Glass
Software fault finding on plc systems
Writing software for plc operated machines
Alteration Of Drawings And Schematics , Using AutoCAD
Working As Part Of A Team And On An Individual Basis
Plant Maintenance , Fault Finding , Routine Maintenance
Installation Of New Equipment , Panel Wiring And Commissioning
Calibration Of Scales And Kiln Instrumentation
Computer Setup In Electrical Department
- 9. Curriculum Vitae
Damon Hughes Page 9 of 9 © 2016
Alteration And Setup Of Instrument Controls
Planning Jobs And Ordering Parts
January 1994 - December
1996
Electrical Technician, Pilkington Special Glass
Working At Pilkington Special Glass As Contract E&I Technician
Education
1989 JIB Electrical Apprenticeship
1990 NVQ level 3 Electrical installation
1989
1988
2000
C&G 236 Part C
C&G 2364 Supplementary Electronics
C&G 2391
2018 Comp EX certificate of Core Competence: EX01, 02, 03, 04
2017 Offshore survival
2014 CA EBS
2014 Mist
2011 Frontline Supervisor HSE Training
2015 Working At Height
1997 High Voltage Switching
2001
2001
2000
Siemens Step 7 PLC service training course
Mitsubushi Plc Advanced A-Series Plc
Mitsubushi Plc Advanced Fx Plc And HMI Course
2005 GE Fanuc Cimplicity HMI
23.01.2009
23.01.2009
22.01.2009
08.02.2008
12.06.2007
28.05.2007
11.09.2006
11.06.2006
22.11.2001
25.05.2001
Languages English, Fluent oral/written communication
Additional Information Over 14 years of experience with Aker MHWIRTH.
Worked with Various PLC systems fault finding and software modification to Aker
MHWIRTH QA21.
Keen Experienced employee flexible and willing to embrace new concepts and
equipment.