Today, we talk about the 5G NR communication technology and its characteristics. The current communication technology is mainly divided into two types: wired communication and wireless communication. Wired communication uses wired media for conduction, such as copper wire, optical fiber, and so on. Data transmission in wired media can reach a very high rate, and the current maximum experimental rate of a single fiber can reach 26Tbps. But the bottleneck of mobile communication lies in the wireless communication part. The current mainstream mobile communication standard is LTE, with a theoretical speed of 150Mbps, which is much lower than the wired transmission rate.

1. C&T RF Antennas Inc
https://ctrfantennasinc.com/ https://lcantennas.com/ https://pcbantennas.com/
Please Contact us for more information, thank you.
Contact Person: Coco Lu coco@ctrfantennasinc.com (+86)13412239096
5G NR Communication Technology And Characteristics
Today, we talk about the 5G NR communication technology and its characteristics.
The current communication technology is mainly divided into two types: wired communication
and wireless communication. Wired communication uses wired media for conduction, such as
copper wire, optical fiber, and so on.
Data transmission in wired media can reach a very high rate, and the current maximum
experimental rate of a single fiber can reach 26Tbps. But the bottleneck of mobile
communication lies in the wireless communication part. The current mainstream mobile
communication standard is LTE, with a theoretical speed of 150Mbps, which is much lower than
the wired transmission rate.
Basic principles of 5G NR communication technology
Introducing the basic theoretical formula c=λν (speed of light=wavelength frequency), the
frequency of light waves used in optical fibers is between 1014-1020Hz, and the frequency of
radio waves is between 106-1010Hz, and lightwave communication is now gradually developing.
Name Symbol Frequency (Hz) Band Wavelength (m) Use
Very low-frequency ELF 3-30 Very long wave 100M-10M
Ultra-low frequency SLF 30-300 Ultra-long wave 10M-1M
Ultra low-frequency ULF 300-3K Extra long wave 1 mega-100,000
Very low-frequency VLF 3K-30K Very long wave 100,000-10,000 Submarine communication,
long-distance, ultra-long-distance communication
Low-frequency LF 30K-300K long wave 10,000-11,000 transoceanic communication,
medium-distance communication, underground rock formation communication, long-distance
navigation
Intermediate frequency MF 300K-3M medium wave 1,000-1 hundred marine communications,
amateur radio communications, mobile communications, mid-range navigation

2. C&T RF Antennas Inc
https://ctrfantennasinc.com/ https://lcantennas.com/ https://pcbantennas.com/
Please Contact us for more information, thank you.
Contact Person: Coco Lu coco@ctrfantennasinc.com (+86)13412239096
High-frequency HF 3M-30M Shortwave 100-10 Long-distance shortwave communication,
international fixed-point communication, mobile communication
Very high-frequency VHF 30M-300M Ultrashort wave 10-1 Ionospheric scattering, meteor trail
communication, artificial ionospheric communication, communication to space vehicles, mobile
communication
Ultra high-frequency UHF 300M-3G decimeter wave, microwave 1-1 point Small capacity
microwave relay communication, tropospheric scattering communication, medium-capacity
microwave communication, mobile communication
Ultra-high frequency SHF 3G-30G centimeter wave 1 minute -1% large-capacity microwave relay
communication, mobile communication, satellite communication, international maritime satellite
communication
Extremely high-frequency EHF 30G-300G millimeter-wave 1 cm-1 mm communication during
re-entry into the atmosphere, waveguide communication
To high-frequency THF 300G-3T silk rice wave 1 milli-1 silk
At present, the band range of mobile communication we use belongs to IF-UHF.
1G mainly includes AMPS, NMT, TACS, and other communication standards.
2G mainly includes GSM, TDMA, CDMA, PDC and iDEN, and other communication standards.
3G mainly includes WCDMA, CDMA2000, TD-SCDMA, WiMAX, and other communication
standards.
4G mainly includes LTE, TD-LTE, and FDD-LTE communication standards.
5G mainly has mixed D2D (TDD and FDD) communication standards.
At present, the mainstream LTE technology belongs to UHF and UHF. With the development of
communication technology, the frequency of radio waves used is getting higher and higher, and
the transmission rate that can be carried is higher, which can be summarized as the following
relationship
Higher frequency = higher carrying rate = higher data-carrying capacity
5G currently has two main frequency ranges (not NSA/SA mentioned in networking).
According to the list of 5G NR supported frequency bands specified by 3GPP, it can be known that
up to 100GHz
5G NR FR1 450MHz-6GHz Maximum 100Mhz
5G NR FR2 24.25GHz-52.6GHz Maximum 400MHz
Calculate according to the aforementioned formula:
Therefore, the important technical feature of 5G NR communication technology mentioned in the
media, millimeter wave, is derived in this way.
The impact of high-frequency radio waves on the construction of base stations
Why is the millimeter-wave data-carrying capacity not used in the past 1G-4G communications
when the data-carrying capacity is so high? The main reason is based on cost factors.
According to physical principles, we can know the characteristics of electromagnetic waves: the
higher the frequency, the shorter the wavelength, the closer it is to a straight line, the lower the
diffraction ability, and the greater the attenuation.
Typical losses are as follows: free space path loss, diffraction loss, penetration loss, rain

3. C&T RF Antennas Inc
https://ctrfantennasinc.com/ https://lcantennas.com/ https://pcbantennas.com/
Please Contact us for more information, thank you.
Contact Person: Coco Lu coco@ctrfantennasinc.com (+86)13412239096
attenuation loss.
The biggest drawback of 5G NR's use of the high-frequency transmission is that the transmission
distance and coverage are greatly reduced. In the case of achieving signal coverage of the same
area, the number of 5G NR communication technology base stations will far exceed the number
of 4G base stations.
In other words, the construction cost of the base station will rise substantially. Traditional
low-frequency communication has longer wavelengths and long transmission distances, which
can achieve high-power and large-scale coverage and reduce the number of base stations.
Therefore, based on the frequency characteristics of 5G NR communication technology, the base
stations to be built in the future will tend to be smaller, smaller in power, and larger in number.
The advantages of 5G NR millimeter wave, the principle of beamforming
If the length of a pair of antennas is equal to half a wavelength, the antenna at this time is in a
resonant state, with the smallest characteristic impedance and pure resistance, no reactance, the
smallest loss, and the largest radiation.
Therefore, the shorter the wavelength of the electromagnetic wave, the smaller the volume of a
single antenna unit required, and more dipole units can be constructed on the flat directional
antenna of the same area.
When an antenna is used, the radiation direction of electromagnetic waves propagates in 360
degrees, but an antenna array can realize the single-directional propagation of electromagnetic
waves.
The greater the number of antennas, the more concentrated the electromagnetic wave
propagation direction. Two or more antennas will transmit signals with a controlled delay or
phase shift, thereby creating a directional constructive interference lobe.
In the FDD system, the user terminal provides feedback in the form of a precoding matrix index
(PMI); however, in the TD-LTE system, this requirement is canceled due to the reciprocity of the
channel.
In the TD-LTE system, the user terminal sends a channel report signal to the base station, and the
base station checks the relative phase difference between antennas of the same polarization, so
as to estimate the direction of arrival (DoA) of the user terminal.
Although the estimation is performed in the uplink, the base station can still use channel
reciprocity to perform transmission tasks in the downlink based on the estimation of the uplink.
According to DoA, the RRU dynamically adjusts the antenna weight (relative amplitude and phase)
of each component in the antenna array, directs the beam to the desired user, or directs the zero
signal to the direction where no interference is required. This is the basic working principle of
beamforming in LTE.
In the 5G NR communication technology system, LTE's proportional fairness (PF) scheduler is
optimized. 5G NR communication technology is based on the CSI-RS beam reporting system for
scheduling. If PF is used for allocation, it will not be able to achieve sufficient interaction speed,
so the Beam optimization mechanism is introduced.
5G NR communication technology will bring greater access to MIMO (Multiple Input Multiple
Output) networks, but in MIMO networks, cellular base stations send and receive radio

4. C&T RF Antennas Inc
https://ctrfantennasinc.com/ https://lcantennas.com/ https://pcbantennas.com/
Please Contact us for more information, thank you.
Contact Person: Coco Lu coco@ctrfantennasinc.com (+86)13412239096
frequency signals in parallel through more antennas than are usually used on base stations,
improving the base station’s data throughput performance.
But these signals can also interfere with each other. Beamforming is an efficient signal processing
technology that enables the base station to send target data beams to users, thereby reducing
interference and making more effective use of the radio frequency spectrum.
CU-DU separation of 5G NR communication technology
The full name of CU is a Centralized Unit, as the name implies, it is a centralized unit; the full
name of DU is Distributed Unit.
The 4G LTE access part structure is the core network-BBU-RRU-antenna feeder, and the base
station is directly connected to the core network through the BBU.
In 5G NR communication technology, RRU and antenna feeder are combined into AAU, BBU is
split into DU and CU, each base station has one DU, and multiple sites share a common CU for
centralized management.
As early as in the 2G and 3G era, the wireless access architecture was similar to 5G NR, and
multiple base stations were managed by the same BSC/RNC controller.
Compared with 2G and 3G, the 4G network architecture is a drastic change, which brings low
latency and deployment flexibility. The problem is also obvious, mainly due to the inefficiency of
information exchange between base stations.
When the BBU is directly connected to the core network, each base station must independently
exchange information with surrounding base stations to form a one-to-many network interaction
structure. In the case of a large number of base stations, the number of connections will increase
exponentially, leading to interference between base stations is difficult to coordinate, and the
network is congested or even paralyzed.
2G and 3G networks are different, because with the presence of the omniscient and omnipotent
central node of the controller, the information of all base stations is clear at a glance, and overall
management of global resources is easier.
Therefore, in the 5G NR era, various functions of the core network have been re-architected, and
the physical layer processing of the original BBU is transferred to the RRU, and the RRU and the
antenna feeder system are combined into an integrated AAU, which combines the original BBU.
Split into CU and DU, CU integrates some core network functions and becomes a management
node.
The division of CU and DU is based on the real-time requirements of different protocol layers. Put
the physical bottom layer in the original BBU to AAU for processing.
The media access control sublayer MAC and radio link control sublayer RLC in the physical layer 2
with high real-time requirements are placed in the DU for processing, and the packet data with
low real-time performance is aggregated PDCP (Packet Data Convergence Protocol) and RRC layer
(Radio Resource Control) are placed in the CU for processing.
5G NR communication technology core
CU (Station1&2&3&4)
DU DU DU DU
AAU AAU AAU AAU

5. C&T RF Antennas Inc
https://ctrfantennasinc.com/ https://lcantennas.com/ https://pcbantennas.com/
Please Contact us for more information, thank you.
Contact Person: Coco Lu coco@ctrfantennasinc.com (+86)13412239096
Station1 Station2 Station3 Station4
5G NR communication technology wireless network architecture
The benefits of the separation of CU and DU are as follows
1. Realize the sharing of base station resources
Since the idle and busy time of each base station is different, the general practice is to configure
each base station to the maximum capacity, but in many cases, it cannot be achieved.
Taking the example school with a large population migration scale, the school building has a high
volume of business access during the day, and is basically idle at night, while the student
dormitory has a high volume of business access at night.
If these two places are designed according to the maximum capacity, it will definitely cause a
waste of resources, because the total service access is basically the same.
If the base stations of the teaching building and the dormitory are managed in a unified manner,
the DU is deployed in a centralized manner, and the CU is scheduled in a unified manner, the
general baseband resources can be saved, not to mention a larger park with more than one base
station.
The deployment method of CU and DU is similar to that of 4G C-RAN, but C-RAN has too high
requirements for fiber resources and the cost is too high to be realized.
The same is true in 5G NR communication technology. After all, CU and DU are still deployed in
the same base station, which can also achieve a certain degree of common resource sharing. It is
also another way to achieve C-RAN. It will not be very clear in the short term. The deployment of
CU and DU is divided.
In the early stage of construction, the two were mainly based on logical separation, but they still
existed in one. For the future of 5G NR communication technology, CU and DU must coexist in
the two architectures of co-location and separation.
2. It can better meet the access requirements of different scenarios
5G NR communication technology introduces millimeter waves into practical applications. Due to
the characteristics of frequency bands, the number of sites will increase exponentially. It forms a
high- and low-frequency mixed network environment with low-frequency sites. If you want to
maximize performance in this environment, you must There is a high-performance central control
node for collaborative management of the two.
CU can perform this role, but while the split brings many advantages, the disadvantages are also
obvious. The most obvious disadvantage is the increase in delay. For the three main business
scenarios, enhanced mobile broadband eMBB, large-connected IoT mMTC, and
ultra-high-reliability and ultra-low-latency communication uRLLC have different impacts.
eMBB does not require high latency. As long as the data rate is sufficient, you don’t need to care
about latency; mMTC has lower latency requirements and only needs to be able to communicate,
but the impact on uRLLC is huge, and it is critical for some parts. Business is not allowed to exist.
Therefore, it is possible to split the construction for different business needs according to the
specific situation. eMBB and mMTC can be deployed separately from CU/DU to improve
utilization, but for uRLLC, CU/DU combined construction is required.
This year, 5G NR communication technology commercial use mainly supports eMBB services.

6. C&T RF Antennas Inc
https://ctrfantennasinc.com/ https://lcantennas.com/ https://pcbantennas.com/
Please Contact us for more information, thank you.
Contact Person: Coco Lu coco@ctrfantennasinc.com (+86)13412239096
Currently, 3.5GHz is mostly used internationally. Because the coverage of this frequency band is
equivalent to that of 4G, to a large extent, 4G and 5G NR communication technology share
computer rooms and base stations in the initial stage, the lowest-cost approach.
It only needs to upgrade the supporting equipment such as the power supply inside the original
machine room, put it into the CU/DU integrated 5G base station, and install it in the rack, and
then 5G NR communication technology can be quickly activated.
If the CU and DU are separated, a dedicated data center needs to be built, which is too costly. So
in the initial stage, CU/DU is only logically divided, in fact, the two are still integrated equipment.
You may also be interested in the below articles.
What Is LTE-M Technology?
How To Choose 2.4G And 5G?
What Is Electrical Grounding?
433MHz RF Transmitter And Receiver Antenna
About Wi-Fi, You Did Not Know
Antenna Design Wifi