The document describes the design and fabrication of a scroll saw machine. It lists the main components required, including pulleys, belts, steel plates, and hollow bars. The manufacturing process involves making the table, attaching the machine mechanism to the table, mounting an L-shaped arm over the table, and attaching the motor and belt. Design drawings were created using Solidworks to illustrate the table, lower and upper blocks, workpiece table with an I-section, and L-section that make up the scroll saw machine.

1. Design and fabrication of
Scroll saw machine

2. Figure of scroll saw machine

3. 1) Introduction
 A Scroll saw is a small electric -operated saw used to cut intricate
curves in wood, metal, or other materials
 The fineness of its blade allows it to cut more delicately than a
power jigsaw
 It works on stock of blade. The blade is cut profile cutting, curves
circle and other complicated part
 Scroll saw work on a tool’s up & down motion and our design is
innovative so we can cut the material very precisely and give any
shape on job
 This reduces blade bending and breakage-and the slight forward
and backward motion of the blade allows the teeth to cut
smoothly

4. 2) Components required
1. Pulley and belt
2. Mild steel plates

5. 3. Galvanise iron hollow bar
4. Blades

6. 3) Manufacturing process
1. Making the table
2. Attaching the machine mechanism
3. Mounting the ‘L’ arm over the table
4. Mounting the motor
5. Attaching the belt

7. 4) Design
 Assembly drawing on Solidworks

8. • Components drawing
1) Table

9. 2) Lower block

10. 3) Upper block

11. 3) Work piece table with I section

12. 3) L section