It is ccording to GB/T 24825-2009 and IEC 62384:2006. It can measure the following parameters for 60 LED Drivers at one time in production line quick in 20s: Input Characteristics Test (AC), Output Characteristics Test (AC/DC) and harmonic
CCS335 _ Neural Networks and Deep Learning Laboratory_Lab Complete Record
LED Driver online Tester
1. Brochure
Chapter 1 Summarize
(大标题,居中小三加粗,尽量在新一页,用 Chapter 区分)
1. Operating instruction (一级标题,左对齐小四加粗)
According to the requirements of CIE, IESNA and the National’s standard, this
system is a multi-measurement mode spectrophotometer system which can realize
B-β, A-α and C-γ etc through rotating lamps and lanterns.
It test Spatial, light intensity distribution curves on any cross section (can be shown
under the rectangular coordinate system or polar coordinate system), spatial
iso-intensity curve. (正文,段首顶格左对齐 10 号,段落之间空行)
1.1 Explosive material (二级标题,左对齐五号加粗)
According to the requirements of CIE, IESNA and the National’s standard, this
Global Office of Lisun Electronics Inc.
http://www.Lisungroup.com
Lisun Group (Hong Kong) Limited
Add: Room C, 15/F Hua Chiao Commercial Center, 678 Nathan Road, Mongkok, KL, HK
Tel: 00852-68852050 Fax: 00852-30785638
Email: SalesHK@Lisungroup.com
Lisun Electronics (Shanghai) Co., Ltd
Add: 113-114, No. 1 Building, Nanxiang Zhidi Industry Park, No. 1101, Huyi Road, Jiading
District, Shanghai, 201802, China
Tel: +86(21)5108 3341 Fax: +86(21)5108 3342
Email: SalesSH@Lisungroup.com
Lisun Electronics Inc. (USA)
Add: 445 S. Figueroa Street, Los Angeless, CA 90071, U.S.A.
Email: Sales@Lisungroup.com
Lisun China Factory
Add: NO. 37, Xiangyuan Road, Hangzhou City, Zhejiang Province, China
Tel: +86-189-1799-6096
Email: Engineering@Lisungroup.com
Lead in CFL & LED Test Instruments
Rev. 20161021
LED Driver Online Tester
(LEDLS-60/LEDLS-12)
2. Lisun Electronics Inc. Sales@Lisungroup.com www.Lisungroup.com
-Page 1 -
LED Driver Online Tester LEDLS-60/LEDLS-12
LEDLS-60
LEDLS-12
LEDLS-60/LEDLS-12 LED Driver Online Tester is applied to the production line for
the finished products testing. With features of simplified operation and nice-looking,
the workers can operate it at very short time. This system can meet the
requirements of IEC62384, GB24825-2009 and other relative standards.
Specification:
• The LEDLS-12 has one channel which can test 6 LED Driver input and output
parameters at one time (or 12 LED Driver input or output parameters at one time).
• The LEDLS-60 has ten channels which can test 60 LED Driver input and output
parameters at one time.
• The tester can measure the following parameters:
1). Input Parameter Test (AC) in RMS value: U, I, P, PF, Hz, THD
3. Lisun Electronics Inc. Sales@Lisungroup.com www.Lisungroup.com
-Page 2 -
2). Output Parameter Test (AC/DC) in RMS or Average value: U, I, P, PF, Efficiency,
Ripple Wave Current
3). The Harmonic Test: THD and harmonic components test of 2, 3, 5, 7, 9 and 11
(total 50 is option)
• The LEDLS-60 has 8inch LCD screen to display all of the test parameters, the
LEDLS-12 has 12 windows to display all the test parameters
• The test speed is quick: The LEDLS-60 needs only 20s include the LED load light on
and test. The LEDLS-12 needs only 2s include the LED load light on the test
• They only need to connect six LED DC electric load (LISUN M9822) or LED lamp to
do test
• It allows to set upper or lower limit, it will have Noisy/Light warning if the test
results were over limit.
• The manual trigger and software connect to PC to storage test results are option
(extra cost)