thanks for watching

1. DHCP on Windows Server 2012
Turki alghamdi
114331723
33221

2. After install the DHCP, select the tools and
choose the(DHCP).

3. Then click right on the DHCP IPv4 stack and
select (NEW SCOPE).

4. Click next, Select your scope ( NAME AND
DISCRIPTION).

5. Now you have to select the (IP range) and subnet mask, then
next.
Now you can select exclusion from DHCP static IPs or
reservations and the delay.

6. Select next, choose (yes) select next.

7. At first we configure the (default gateway), select Add.
After this we configure the DNS options that will provide via DHCP,
(first put the domain name)
(second put the IP address)
If an DNS Server is not reachable you will get a warning but you are able to enter the IP either.

8. Select next, choose yes, then next.

9. Now click (finish) and the scope will be
installed and activated.

10. The DHCP should look now nearly like this.