The document discusses how to install the DHCP server role in Windows Server to dynamically distribute IP addresses and network configuration parameters. It is a multi-step process that involves opening the server manager dashboard, adding the DHCP server role through the add roles and features wizard, selecting the server, confirming installation selections, and monitoring installation progress. Once complete, the DHCP server will be able to dynamically distribute IP addresses and network configurations to devices on the network.

1. By : Jendan Hassan Jendan
Teacher :Ibrahim AL-Odaini
Article : Operating systems

2. I goanna be in this project how installing the DHCP

3. The DHCP is : Dynamic Host Configuration Protocol networking protocol used on standardized(DHCP) is a (IP) networks for dynamically distributing Internet Protocolfor IP addressesnetwork configuration parameters, such as interfaces and services

4. 1- the first step open server manger , go to dash board , mange and add roles and fetchers .

5. then opened the add roles and fetchers wizard (before the begin) press next .

6. Then select installation type press next.

7. Then select server if you have more server , press next

8. Then select the roles and select DHCP, press next .

9. Then select fetchers if you want any fetchers and press next .

10. Then DHCP server press next .

11. Then confirm installation selections press install .

12. Finally installation progress press close .

13. Finally tank you for my lasting
This project by Jendan Hassan