Computer Register | Computer Science
•Download as PPTX, PDF•
3 likes•5,907 views
Computer instructions are stored in sequential fashion. As one instruction is executed the next one is ready to be executed and the previous one always leaves some mark so that the next one can be tracked. Copy the link given below and paste it in new browser window to get more information on Computer Register:- http://www.transtutors.com/homework-help/computer-science/computer-architecture/registers/
Report
Share
Report
Share
Recommended
Program control
Program control instructions can change the program counter to alter the flow of code execution. Conditional branch instructions and subroutine calls change the program counter based on status bit conditions or function needs. When an interrupt occurs internally or externally, the CPU handles it through fetch, decode and execute operations to switch to supervisor mode and service the interrupt.
Microprocessor ppt
This document discusses microprocessors and networking. It provides details on microprocessors such as their components like the ALU, registers and control unit. It describes early microprocessors like the 4004 and 8085. It also discusses microprocessor memory, buses and different types of integrated circuits. The document also defines what a computer network is and the different ways of physically connecting computers through guided media like coaxial cable, twisted pair and fiber optic cable. It explains wireless connections using infrared, radio frequency and microwave communications.
Architecture of 8085 microprocessor
The document discusses the architecture of the Intel 8085 microprocessor. It describes the 8085 as an 8-bit microprocessor introduced in 1976 that uses a single +5 volt power supply. The internal architecture includes a control unit, arithmetic logic unit (ALU), registers including the accumulator, program counter, stack pointer, instruction register/decoder, and timing and control unit. The document also briefly discusses interrupts, serial I/O, and some applications of microprocessors like mobile phones, watches, and appliances.
Register transfer language & its micro operations
The document discusses register transfer language and micro-operations in digital systems. It describes (1) how register transfer language can be used to describe the sequence of micro-operations involved in any computer function, (2) the four main types of micro-operations - register transfer, arithmetic, logic, and shift micro-operations, giving examples of each, and (3) how register transfers and bus transfers are represented in register transfer language.
DMA and DMA controller
The document discusses direct memory access (DMA) and DMA controllers. It explains that DMA allows hardware subsystems like disk drives and graphics cards to access main memory independently of the CPU. This is useful because it allows data transfers to occur in parallel with other CPU operations, improving overall system performance. A DMA controller generates memory addresses and initiates read/write cycles. It has registers that specify the I/O port, transfer direction, and number of bytes to transfer per burst. DMA controllers use different transfer modes like burst, cycle stealing, and transparent to move blocks of data efficiently between peripheral devices and memory.
Evolution of Microprocessor
The document summarizes the evolution of microprocessors across five generations from 1971 to present. It describes the key developments including the first microprocessor introduced by Intel in 1971 called the 4004. Subsequent generations saw the development of 8-bit, 16-bit and 32-bit microprocessors using newer technologies that improved speed and density. The fifth generation is dominated by Intel processors like Pentium and multi-core CPUs that can exceed speeds of 1GHz.
Computer organization memory
The document discusses the memory system in computers including main memory, cache memory, and different types of memory chips. It provides details on the following key points in 3 sentences:
The document discusses the different levels of memory hierarchy including main memory, cache memory, and auxiliary memory. It describes the basic concepts of memory including addressing schemes, memory access time, and memory cycle time. Examples of different types of memory chips are discussed such as SRAM, DRAM, ROM, and cache memory organization and mapping techniques.
Von Neumann Architecture
The document summarizes the Von Neumann architecture, which is a design model for stored programs. It describes the key components of the architecture including the input/output subsystem, central processing unit (CPU), arithmetic logic unit (ALU), control unit, and main memory. The CPU is where computations take place via four main functions: fetch, decode, execute, and write back. The ALU performs arithmetic and logic operations while the control unit coordinates activity within the CPU. The main memory is divided into volatile RAM and non-volatile ROM for temporary and permanent storage.
Recommended
Program control
Program control instructions can change the program counter to alter the flow of code execution. Conditional branch instructions and subroutine calls change the program counter based on status bit conditions or function needs. When an interrupt occurs internally or externally, the CPU handles it through fetch, decode and execute operations to switch to supervisor mode and service the interrupt.
Microprocessor ppt
This document discusses microprocessors and networking. It provides details on microprocessors such as their components like the ALU, registers and control unit. It describes early microprocessors like the 4004 and 8085. It also discusses microprocessor memory, buses and different types of integrated circuits. The document also defines what a computer network is and the different ways of physically connecting computers through guided media like coaxial cable, twisted pair and fiber optic cable. It explains wireless connections using infrared, radio frequency and microwave communications.
Architecture of 8085 microprocessor
The document discusses the architecture of the Intel 8085 microprocessor. It describes the 8085 as an 8-bit microprocessor introduced in 1976 that uses a single +5 volt power supply. The internal architecture includes a control unit, arithmetic logic unit (ALU), registers including the accumulator, program counter, stack pointer, instruction register/decoder, and timing and control unit. The document also briefly discusses interrupts, serial I/O, and some applications of microprocessors like mobile phones, watches, and appliances.
Register transfer language & its micro operations
The document discusses register transfer language and micro-operations in digital systems. It describes (1) how register transfer language can be used to describe the sequence of micro-operations involved in any computer function, (2) the four main types of micro-operations - register transfer, arithmetic, logic, and shift micro-operations, giving examples of each, and (3) how register transfers and bus transfers are represented in register transfer language.
DMA and DMA controller
The document discusses direct memory access (DMA) and DMA controllers. It explains that DMA allows hardware subsystems like disk drives and graphics cards to access main memory independently of the CPU. This is useful because it allows data transfers to occur in parallel with other CPU operations, improving overall system performance. A DMA controller generates memory addresses and initiates read/write cycles. It has registers that specify the I/O port, transfer direction, and number of bytes to transfer per burst. DMA controllers use different transfer modes like burst, cycle stealing, and transparent to move blocks of data efficiently between peripheral devices and memory.
Evolution of Microprocessor
The document summarizes the evolution of microprocessors across five generations from 1971 to present. It describes the key developments including the first microprocessor introduced by Intel in 1971 called the 4004. Subsequent generations saw the development of 8-bit, 16-bit and 32-bit microprocessors using newer technologies that improved speed and density. The fifth generation is dominated by Intel processors like Pentium and multi-core CPUs that can exceed speeds of 1GHz.
Computer organization memory
The document discusses the memory system in computers including main memory, cache memory, and different types of memory chips. It provides details on the following key points in 3 sentences:
The document discusses the different levels of memory hierarchy including main memory, cache memory, and auxiliary memory. It describes the basic concepts of memory including addressing schemes, memory access time, and memory cycle time. Examples of different types of memory chips are discussed such as SRAM, DRAM, ROM, and cache memory organization and mapping techniques.
Von Neumann Architecture
The document summarizes the Von Neumann architecture, which is a design model for stored programs. It describes the key components of the architecture including the input/output subsystem, central processing unit (CPU), arithmetic logic unit (ALU), control unit, and main memory. The CPU is where computations take place via four main functions: fetch, decode, execute, and write back. The ALU performs arithmetic and logic operations while the control unit coordinates activity within the CPU. The main memory is divided into volatile RAM and non-volatile ROM for temporary and permanent storage.
PPT on 8085 Microprocessor
The document provides information about the 8085 microprocessor. It begins with an introduction and pin diagram. It then describes the pin functions and architecture, including the arithmetic logic unit, registers, program counter, and stack pointer. It discusses the timing and states of memory read, write, and I/O cycles. It explains how to interface memory and I/O devices to the 8085 bus. It covers the different interrupt types and how the 8085 responds to interrupts. Finally, it provides a short code example to add two numbers.
INTEL 80386 MICROPROCESSOR
The 80386 microprocessor was Intel's 32-bit processor introduced in 1985. It had several improvements over the 80286 including a 32-bit external data bus, increased virtual memory support up to 4GB using segmentation and paging, and faster instruction execution via parallel pipelining. The 80386 came in two versions - the 80386DX with a full 32-bit external data bus, and the lower-cost 80386SX which had a 16-bit data bus. It found use in personal computers and some embedded applications like early mobile phones and spacecraft due to its power and multitasking capabilities.
Unit II arm 7 Instruction Set
The document discusses various aspects of the ARM-7 architecture including its addressing modes, instruction set, and data processing instructions. It describes 9 different addressing modes including immediate, absolute, indirect, register, register indirect, base plus offset, base plus index, base plus scaled index, and stack addressing. It also provides details about the ARM instruction set, Thumb instruction set, and I/O system. Examples are given to illustrate different instructions such as MOV, SUB, ORR, CMP, MUL, branch instructions, LDR, STR, and SWI.
Booth’s algorithm.(a014& a015)
This document provides an overview of Booth's algorithm for multiplying signed and unsigned integers. It begins with an introduction and history, noting that the algorithm was invented by Andrew Donald Booth in 1950. It then explains the key points of Booth's algorithm through a flow chart and examples. For unsigned integers, it uses fewer additions/subtractions than other methods by conditionally adding or subtracting the multiplicand. For signed integers, it first converts them to unsigned using 2's complement before applying the same process.
Cache memory
Cache memory is a small, fast memory located between the CPU and main memory. It stores copies of frequently used instructions and data to accelerate access and improve performance. There are different mapping techniques for cache including direct mapping, associative mapping, and set associative mapping. When the cache is full, replacement algorithms like LRU and FIFO are used to determine which content to remove. The cache can write to main memory using either a write-through or write-back policy.
Architecture of 8051 microcontroller))
A microcontroller is a single-chip microprocessor system consisting of a CPU, memory, and input/output ports. It can be considered a complete computer on a single chip. The 8051 was an early microcontroller developed by Intel for use in embedded systems. It had 4KB of program memory, 128 bytes of data memory, timers, counters, and I/O ports. The 8051 has separate memory spaces for program and data memory and its CPU, registers, timers and I/O ports allow it to monitor and control external devices.
Computer system bus
The main Objective of this presentation is to define computer buses , especially system bus . which is consists of data bus , address bus and control bus.
Semiconductor memory
This document discusses different types of semiconductor memory used in computing systems. It describes volatile memory like static RAM (SRAM) and dynamic RAM (DRAM), as well as non-volatile memory such as ROM, MRAM, and flash memory. The basic unit of semiconductor memory is the memory cell, which can store a single bit using MOS or CMOS fabrication. Memory architectures are organized in arrays or hierarchies to store large amounts of data within computer systems.
Computer architecture input output organization
Computer Architecture Input Output Organization seminar
Mustansiriya University
Department of Education
Computer Science
Microprocessor
The document provides an overview of microprocessors, including what they are, their basic components and functions. It discusses how a microprocessor:
- Acts as the central processing unit (CPU) of a computer to provide computational control
- Can be programmed to perform functions on data by writing instructions into its memory
- Has components like an arithmetic logic unit, registers, cache memory and bus interfaces to transfer data and addresses
Microprogrammed Control Unit
(Ref : Computer System Architecture by Morris Mano 3rd edition) : Microprogrammed Control unit, micro instructions, micro operations, symbolic and binary microprogram.
Register organization, stack
In these slides the registration organization and stack organization have discussed in detail. Stack organization is discussed with the aid of animation to let the user understand it in a better and easy way.
Memory Organization
This slide contain the introduction to memory , hierarchy, types, virtual memory,associative memory and cache memory.
Functional units
The document discusses the functional units of a computer system. It describes the five main units: input unit, central processing unit (CPU), memory unit, arithmetic and logical unit (ALU), and output unit. The CPU contains the control unit and ALU. The memory unit stores programs and data in primary (RAM/ROM) and secondary (disks, tapes) storage. The input unit takes in data via devices like keyboards and mice. The output unit displays processed results through monitors and printers. The ALU performs arithmetic and logical operations on data under the control unit's coordination of the other units.
mano.ppt
This document provides an overview of the chapters and content covered in a textbook on computer organization and architecture. The chapters cover digital logic circuits, digital components, data representation, register transfer and microoperations, basic computer organization and design, programming and instruction sets, control units, processor design, pipelining and parallel processing, arithmetic, input/output, and memory organization. Key concepts discussed include logic gates, boolean algebra, combinational and sequential circuits, registers, buses, arithmetic and logic operations, and memory.
Introduction to microprocessor
The document traces the history and development of microprocessors from 1971 to the present. It begins with the Intel 4004, the first commercial microprocessor released in 1971. Important subsequent microprocessors included the Intel 8080 in 1974 and 8085 in 1977. The Pentium brand was introduced in 1993 and included 64-bit x86 instruction sets. The Core 2 brand from 2006 featured single, dual, and quad-core processors. The document also provides basic explanations of how microprocessors work and their components like the ALU, registers, and control unit.
design of accumlator
The document discusses the accumulator register in a CPU. It describes the accumulator as a short-term storage register for arithmetic and logic operations. It contains details about the inputs and outputs to the accumulator from other registers like the data register and input register. It also explains the different microoperations that can be performed on the accumulator like addition, transfer, complement, and shift operations. The control gates for these microoperations are also defined.
Memory organization (Computer architecture)
Memory is organized in a hierarchy with different levels providing trade-offs between speed and cost.
- Cache memory sits between the CPU and main memory for fastest access.
- Main memory (RAM) is where active programs and data reside and is faster than auxiliary memory but more expensive.
- Auxiliary memory (disks, tapes) provides backup storage and is slower than main memory but larger and cheaper.
Virtual memory manages this hierarchy through address translation techniques like paging that map virtual addresses to physical locations, allowing programs to access more memory than physically available. When data is needed from auxiliary memory a page fault occurs and page replacement algorithms determine what data to remove from main memory.
Status register
The document discusses status registers and shift registers used in digital circuits. A status register contains status bits that indicate the result of arithmetic logic unit (ALU) operations, including carry (C), sign (S), zero (Z), and overflow (V) bits. The carry bit is set if there is an output carry from the ALU, the sign bit is set if the highest order bit is 1, the zero bit is set if the ALU output is all zeros, and the overflow bit is set if the result is out of the ALU's range. Shift registers are used to shift data in digital circuits.
Memory management
This presentation slides you to the essential knowledge of memory management and an idea to create attractive slides
Resultant of Coplanar Parallel Forces | Mechanical Engineering
If two or more than two forces are acting on a single plane then the forces are known as System of Coplanar Forces and if they are acting on different planes then the forces are called as Non-Coplanar Forces. Copy the link given below and paste it in new browser window to get more information on Resultant of Coplanar Parallel Forces:-
http://www.transtutors.com/homework-help/mechanical-engineering/force-systems-and-analysis/resultant-of-coplanar-parallel-forces.aspx
The Centroidal Axis | Mechanical Engineering
The force of attraction exerted by the earth on a solid body is known as Gravitational Force. It acts in a vertically downward direction and is known as weight of the body. Thus, the weight of the body is assumed to act at a point which is known as Centre of Gravity of a body. Copy the link given below and paste it in new browser window to get more information on The Centroidal Axis:-
http://www.transtutors.com/homework-help/mechanical-engineering/bending-stress/moment-of-inertia-about-the-centroidal-axis1.aspx
More Related Content
What's hot
PPT on 8085 Microprocessor
The document provides information about the 8085 microprocessor. It begins with an introduction and pin diagram. It then describes the pin functions and architecture, including the arithmetic logic unit, registers, program counter, and stack pointer. It discusses the timing and states of memory read, write, and I/O cycles. It explains how to interface memory and I/O devices to the 8085 bus. It covers the different interrupt types and how the 8085 responds to interrupts. Finally, it provides a short code example to add two numbers.
INTEL 80386 MICROPROCESSOR
The 80386 microprocessor was Intel's 32-bit processor introduced in 1985. It had several improvements over the 80286 including a 32-bit external data bus, increased virtual memory support up to 4GB using segmentation and paging, and faster instruction execution via parallel pipelining. The 80386 came in two versions - the 80386DX with a full 32-bit external data bus, and the lower-cost 80386SX which had a 16-bit data bus. It found use in personal computers and some embedded applications like early mobile phones and spacecraft due to its power and multitasking capabilities.
Unit II arm 7 Instruction Set
The document discusses various aspects of the ARM-7 architecture including its addressing modes, instruction set, and data processing instructions. It describes 9 different addressing modes including immediate, absolute, indirect, register, register indirect, base plus offset, base plus index, base plus scaled index, and stack addressing. It also provides details about the ARM instruction set, Thumb instruction set, and I/O system. Examples are given to illustrate different instructions such as MOV, SUB, ORR, CMP, MUL, branch instructions, LDR, STR, and SWI.
Booth’s algorithm.(a014& a015)
This document provides an overview of Booth's algorithm for multiplying signed and unsigned integers. It begins with an introduction and history, noting that the algorithm was invented by Andrew Donald Booth in 1950. It then explains the key points of Booth's algorithm through a flow chart and examples. For unsigned integers, it uses fewer additions/subtractions than other methods by conditionally adding or subtracting the multiplicand. For signed integers, it first converts them to unsigned using 2's complement before applying the same process.
Cache memory
Cache memory is a small, fast memory located between the CPU and main memory. It stores copies of frequently used instructions and data to accelerate access and improve performance. There are different mapping techniques for cache including direct mapping, associative mapping, and set associative mapping. When the cache is full, replacement algorithms like LRU and FIFO are used to determine which content to remove. The cache can write to main memory using either a write-through or write-back policy.
Architecture of 8051 microcontroller))
A microcontroller is a single-chip microprocessor system consisting of a CPU, memory, and input/output ports. It can be considered a complete computer on a single chip. The 8051 was an early microcontroller developed by Intel for use in embedded systems. It had 4KB of program memory, 128 bytes of data memory, timers, counters, and I/O ports. The 8051 has separate memory spaces for program and data memory and its CPU, registers, timers and I/O ports allow it to monitor and control external devices.
Computer system bus
The main Objective of this presentation is to define computer buses , especially system bus . which is consists of data bus , address bus and control bus.
Semiconductor memory
This document discusses different types of semiconductor memory used in computing systems. It describes volatile memory like static RAM (SRAM) and dynamic RAM (DRAM), as well as non-volatile memory such as ROM, MRAM, and flash memory. The basic unit of semiconductor memory is the memory cell, which can store a single bit using MOS or CMOS fabrication. Memory architectures are organized in arrays or hierarchies to store large amounts of data within computer systems.
Computer architecture input output organization
Computer Architecture Input Output Organization seminar
Mustansiriya University
Department of Education
Computer Science
Microprocessor
The document provides an overview of microprocessors, including what they are, their basic components and functions. It discusses how a microprocessor:
- Acts as the central processing unit (CPU) of a computer to provide computational control
- Can be programmed to perform functions on data by writing instructions into its memory
- Has components like an arithmetic logic unit, registers, cache memory and bus interfaces to transfer data and addresses
Microprogrammed Control Unit
(Ref : Computer System Architecture by Morris Mano 3rd edition) : Microprogrammed Control unit, micro instructions, micro operations, symbolic and binary microprogram.
Register organization, stack
In these slides the registration organization and stack organization have discussed in detail. Stack organization is discussed with the aid of animation to let the user understand it in a better and easy way.
Memory Organization
This slide contain the introduction to memory , hierarchy, types, virtual memory,associative memory and cache memory.
Functional units
The document discusses the functional units of a computer system. It describes the five main units: input unit, central processing unit (CPU), memory unit, arithmetic and logical unit (ALU), and output unit. The CPU contains the control unit and ALU. The memory unit stores programs and data in primary (RAM/ROM) and secondary (disks, tapes) storage. The input unit takes in data via devices like keyboards and mice. The output unit displays processed results through monitors and printers. The ALU performs arithmetic and logical operations on data under the control unit's coordination of the other units.
mano.ppt
This document provides an overview of the chapters and content covered in a textbook on computer organization and architecture. The chapters cover digital logic circuits, digital components, data representation, register transfer and microoperations, basic computer organization and design, programming and instruction sets, control units, processor design, pipelining and parallel processing, arithmetic, input/output, and memory organization. Key concepts discussed include logic gates, boolean algebra, combinational and sequential circuits, registers, buses, arithmetic and logic operations, and memory.
Introduction to microprocessor
The document traces the history and development of microprocessors from 1971 to the present. It begins with the Intel 4004, the first commercial microprocessor released in 1971. Important subsequent microprocessors included the Intel 8080 in 1974 and 8085 in 1977. The Pentium brand was introduced in 1993 and included 64-bit x86 instruction sets. The Core 2 brand from 2006 featured single, dual, and quad-core processors. The document also provides basic explanations of how microprocessors work and their components like the ALU, registers, and control unit.
design of accumlator
The document discusses the accumulator register in a CPU. It describes the accumulator as a short-term storage register for arithmetic and logic operations. It contains details about the inputs and outputs to the accumulator from other registers like the data register and input register. It also explains the different microoperations that can be performed on the accumulator like addition, transfer, complement, and shift operations. The control gates for these microoperations are also defined.
Memory organization (Computer architecture)
Memory is organized in a hierarchy with different levels providing trade-offs between speed and cost.
- Cache memory sits between the CPU and main memory for fastest access.
- Main memory (RAM) is where active programs and data reside and is faster than auxiliary memory but more expensive.
- Auxiliary memory (disks, tapes) provides backup storage and is slower than main memory but larger and cheaper.
Virtual memory manages this hierarchy through address translation techniques like paging that map virtual addresses to physical locations, allowing programs to access more memory than physically available. When data is needed from auxiliary memory a page fault occurs and page replacement algorithms determine what data to remove from main memory.
Status register
The document discusses status registers and shift registers used in digital circuits. A status register contains status bits that indicate the result of arithmetic logic unit (ALU) operations, including carry (C), sign (S), zero (Z), and overflow (V) bits. The carry bit is set if there is an output carry from the ALU, the sign bit is set if the highest order bit is 1, the zero bit is set if the ALU output is all zeros, and the overflow bit is set if the result is out of the ALU's range. Shift registers are used to shift data in digital circuits.
Memory management
This presentation slides you to the essential knowledge of memory management and an idea to create attractive slides
What's hot (20)
More from Transweb Global Inc
Resultant of Coplanar Parallel Forces | Mechanical Engineering
If two or more than two forces are acting on a single plane then the forces are known as System of Coplanar Forces and if they are acting on different planes then the forces are called as Non-Coplanar Forces. Copy the link given below and paste it in new browser window to get more information on Resultant of Coplanar Parallel Forces:-
http://www.transtutors.com/homework-help/mechanical-engineering/force-systems-and-analysis/resultant-of-coplanar-parallel-forces.aspx
The Centroidal Axis | Mechanical Engineering
The force of attraction exerted by the earth on a solid body is known as Gravitational Force. It acts in a vertically downward direction and is known as weight of the body. Thus, the weight of the body is assumed to act at a point which is known as Centre of Gravity of a body. Copy the link given below and paste it in new browser window to get more information on The Centroidal Axis:-
http://www.transtutors.com/homework-help/mechanical-engineering/bending-stress/moment-of-inertia-about-the-centroidal-axis1.aspx
System Of Coplanar Forces | Mechanical Engineering
A force is a physical quantity that tends to change the behavior of a solid body when applied upon. This change in behavior may be change in shape of the body or motion of the body in the direction of its action. The force is a vector quantity since it has magnitude and direction. Copy the link given below and paste it in new browser window to get more information on System Of Coplanar Forces:-
http://www.transtutors.com/homework-help/mechanical-engineering/force-systems-and-analysis/system-of-coplanar-forces.aspx
Resultant of Two Unlike and Unequal Parallel Forces | Mechanical Engineering
A force is an external agent which changes or tends to change the behavior of any solid body. It is a vector quantity since it is designated with magnitude and direction. The forces may be of tensile or compressive in nature. Copy the link given below and paste it in new browser window to get more information on Resultant of Two Unlike and Unequal Parallel Forces:-
http://www.transtutors.com/homework-help/mechanical-engineering/force-systems-and-analysis/resultant-of-two-unlike-and-unequal-parallel-forces.aspx
SFD Load Diagram Examples | Mechanical Engineering
Beam is a structural member whose lateral dimensions are much smaller than the longitudinal dimension and used to carry loads perpendicular to the longitudinal axis. The beams are generally used in buildings, bridges, trusses, etc., Copy the link given below and paste it in new browser window to get more information on SFD Load Diagram Examples:-
http://www.transtutors.com/homework-help/mechanical-engineering/bending-moment-and-shear-force/sfd-load-diagram-examples.aspx
Principle Of Transmissibility | Mechanical Engineering
A force is an external agent acting on another body. This force may moves or tends to move the body in the direction of its action. The force is a vector quantity since it is represented by its magnitude and direction. The force may be of pulling or pushing type. Copy the link given below and paste it in new browser window to get more information on Principle Of Transmissibility:-
http://www.transtutors.com/homework-help/mechanical-engineering/force-systems-and-analysis/principle-of-transmissibility.aspx
Law Of Polygon | Mechanical Engineering
If a body is subjected to many forces on its plane at a single point then they are called as Coplanar Concurrent Forces. The effect of the forces acting on the body is unknown. It is necessary to determine the resultant force of the coplanar forces to know this effect. Copy the link given below and paste it in new browser window to get more information on Law Of Polygon:-
http://www.transtutors.com/homework-help/mechanical-engineering/force-systems-and-analysis/law-of-polygon.aspx
Similarities between Leadership and Management | Management
In many aspects, leadership and management are almost known as Synonymous but both the words mean different. Similarities between Leadership and ManagementLeadership is an important and essential part of management. Without leadership, the meaning of management won’t be completed. Copy the link given below and paste it in new browser window to get more information on Similarities between Leadership and Management:-
http://www.transtutors.com/homework-help/industrial-management/leadership/similarities-between-leadership-and-management.aspx
Ranked Positional Weight Method | Management
The Ranked Positional Weight Method is a technique used for assembly line balancing that takes into account precedence relationships and task processing times. It involves calculating a Ranked Positional Weight for each work element based on duration and precedence, arranging them in descending order, and then assigning them to workstations to optimize time, machinery, labor and output. The example shows the steps of constructing a precedence diagram, calculating RPW values, ordering by RPW, and assigning elements to six workstations with the goal of minimizing idle time.
Business Intelligence And Business Analytics | Management
Business Intelligence is the initial basic step of Business Analytics. It refers to gathering raw and complex data, and converting it into systematic and logical information in a format that is usable by the end user. Copy the link given below and paste it in new browser window to get more information on Business Intelligence And Business Analytics:-
http://www.transtutors.com/homework-help/management/managing-information-technology/business-intelligence-analytics/
ABC Cost Hierarchy | Management
The document discusses the levels of an activity-based costing (ABC) system. It explains that under ABC, costs are first assigned to activities and then traced to products. There are four levels of costs: unit, batch, product, and facility. Unit costs are directly proportional to the number of units produced. Batch costs are proportional to the number of batches produced regardless of batch size. Product costs can be traced to a product line. Facility costs are incurred for the plant as a whole and cannot be traced to specific units or products. The document provides examples for each cost level.
Speed To Market | Management
In today’s competitive world the term Speed to Market plays an important role for everyone. So, Speed to Market means the pace of introducing any change, innovation, creativity, any market practice for the purpose of increasing the Promotion of the product as quickly as possible in the market. Copy the link given below and paste it in new browser window to get more information on Speed To Market:-
http://www.transtutors.com/homework-help/industrial-management/product-development/speed-to-market.aspx
Managerial Hubris | Finance
The document discusses the concept of managerial hubris, which refers to excessive pride or self-confidence held by senior managers that can lead to cognitive biases and poor decision making. Managerial hubris can result in empire building within an organization as managers seek to expand their power and influence. It is also related to mergers and acquisitions if acquiring company managers overestimate their ability to manage target companies. This can lead to winners' curse, where the winning bid exceeds the true value of the target. The hubris hypothesis suggests managerial hubris in acquisitions can result in bids over the intrinsic value and ultimately lower shareholder returns.
Conductance | Electrical Engineering
Conductance is an ability of a material to allow the passage of current or fluid or temperature through different materials. It is opposite of resistance through a path, higher the conductivity of material lower is its resistance. It is most commonly used with electrical circuits, though it is also used in fluid and thermals. Copy the link given below and paste it in new browser window to get more information on Conductance:-
http://www.transtutors.com/homework-help/electrical-engineering/conductance.aspx
Advantages and Disadvantages of Digital Electronics | Electrical Engineering
Digital Electronics circuits are those which operate with digital signals. These are discrete signals which are sampled from analog signal. Digital circuits use binary notation for transmission of signal. Copy the link given below and paste it in new browser window to get more information on Advantages and Disadvantages of Digital Electronics:-
http://www.transtutors.com/homework-help/electrical-engineering/digital-electronics/advantages-disadvantages/
Stabilization Of Operating Point | Electrical Engineering
This document discusses the stabilization of operating point in BJTs. It defines the load line and operating point, and explains that the operating point depends on factors like current gain, temperature, and supply voltage variations. An increase in current gain or temperature will shift the operating point towards saturation. It also describes different bias circuit types - fixed bias, collector base bias, fixed bias with emitter resistance, and voltage divider bias - and provides their basic equations.
Offer Curves | Economics
Curves are of different types and for different purposes. Some of the curves are utility curve, margin curves, demand and supply curve, offer curves, etc. International trade is based on international specialization. Copy the link given below and paste it in new browser window to get more information on Offer Curves:-
http://www.transtutors.com/homework-help/international-economics/analytical-tools/offer-curves.aspx
Fixed Exchange Rate | Economics
Currency is any form of money in general circulation in a country. Foreign exchange is money denominated in the currency of another country or a group of countries. Simply, an exchange rate is defined as the rate at which the market converts one currency into another. Copy the link given below and paste it in new browser window to get more information on Fixed Exchange Rate:-
http://www.transtutors.com/homework-help/international-economics/economic-policy-in-open-economy/fixed-exchange-rate/
Computer Architecture | Computer Science
Computer Architecture is the set of pre-defined rules and methods that describes the functionality of computer system. In other words, a computer consists of both hardware and software and using some rules and methods for the interaction of both hardware and software of a computer is known as computer architecture. Copy the link given below and paste it in new browser window to get more information on Computer Architecture:-
http://www.transtutors.com/homework-help/computer-science/computer-architecture/
Compilers Computer Program | Computer Science
One of the great advantages of high-level programming languages such as c, c++, and java is that they are machine independent. Programs written in the high-level languages can run on any machine. This is possible because of the compiler. Copy the link given below and paste it in new browser window to get more information on Compilers computer program:-
http://www.transtutors.com/homework-help/computer-science/compilers-computer-program.aspx
More from Transweb Global Inc (20)
Resultant of Coplanar Parallel Forces | Mechanical Engineering
Resultant of Coplanar Parallel Forces | Mechanical Engineering
System Of Coplanar Forces | Mechanical Engineering
System Of Coplanar Forces | Mechanical Engineering
Resultant of Two Unlike and Unequal Parallel Forces | Mechanical Engineering
Resultant of Two Unlike and Unequal Parallel Forces | Mechanical Engineering
SFD Load Diagram Examples | Mechanical Engineering
SFD Load Diagram Examples | Mechanical Engineering
Principle Of Transmissibility | Mechanical Engineering
Principle Of Transmissibility | Mechanical Engineering
Similarities between Leadership and Management | Management
Similarities between Leadership and Management | Management
Business Intelligence And Business Analytics | Management
Business Intelligence And Business Analytics | Management
Advantages and Disadvantages of Digital Electronics | Electrical Engineering
Advantages and Disadvantages of Digital Electronics | Electrical Engineering
Stabilization Of Operating Point | Electrical Engineering
Stabilization Of Operating Point | Electrical Engineering
Recently uploaded
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
How to deliver Powerpoint Presentations.pptx
"How to make and deliver dynamic presentations by making it more interactive to captivate your audience attention"
How to Create a More Engaging and Human Online Learning Experience
How to Create a More Engaging and Human Online Learning Experience Wahiba Chair Training & Consulting
Wahiba Chair's Talk at the 2024 Learning Ideas Conference. How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
Temple of Asclepius in Thrace. Excavation results
The temple and the sanctuary around were dedicated to Asklepios Zmidrenus. This name has been known since 1875 when an inscription dedicated to him was discovered in Rome. The inscription is dated in 227 AD and was left by soldiers originating from the city of Philippopolis (modern Plovdiv).
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Iván Bornacelly, Policy Analyst at the OECD Centre for Skills, OECD, presents at the webinar 'Tackling job market gaps with a skills-first approach' on 12 June 2024
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
How to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdRecently uploaded (20)
B. Ed Syllabus for babasaheb ambedkar education university.pdf
B. Ed Syllabus for babasaheb ambedkar education university.pdf
How to Create a More Engaging and Human Online Learning Experience
How to Create a More Engaging and Human Online Learning Experience
IGCSE Biology Chapter 14- Reproduction in Plants.pdf
IGCSE Biology Chapter 14- Reproduction in Plants.pdf
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
Computer Register | Computer Science
- 2. Computer Register built-in memory locations in the processor fastest memory locations since they are present inside the CPU can hold an instruction, a memory location or a data also used by the CPU to process, store and transfer data from one component of the computer architecture to another
- 3. Basic Computer Registers also known as special purpose registers
- 6. Hey Friend, This was just a summary on Computer Register. For more detailed information on this topic, please type the link given below or copy it from the description of this PPT and open it in a new browser window. www.transtutors.com/homework-help/computer-science/computer- architecture/registers/