Information on shrink wrapping machines, shrink labeling machines, machines used for shrink wrapping process like shrink sleeve applicator, shrink tunnel, l bar sealer, L type sealing machine by Multipack Machinery Company.

1. Machines for Shrink Wrapping – Shrink Sleeve Applicator,
Shrink Tunnel, L Sealer
Machines for Shrink Wrapping – Shrink Sleeve Applicator, Shrink Tunnel, L
Sealer
Shrink wrapping is a simple and cost
effective way to pack products for
effective display and protection from
damage. Through shrink wrapping
manufacturers can ensure that their
products remain safe from tampering
and weather conditions which can
damage the product and therefore reach out their customers in the best
form. In shrink wrapping, product is shrinked into a thin low cost polyolefin
film that gets wrapped around the body of the product tight to its
dimensions and therefore also looks good. Shrink wrapping process is
done using a low cost plastic film and therefore helps to save the
production costs of a manufacturer while offering him benefits of quality
and attractive labeling of products. One of the best advantages of shrink

2. packaging process is that it can be used to label even the oddest shaped
products efficiently. The shrink labeling process generally consists of two
stages – wrapping and sealing of the product and application of heat to the
film so that it shrinks tightly around the product giving it the best body fit
covering.
To perform shrink wrapping, special kind of machines are required called
shrink wrapping machines. Different kinds of shrink wrapping machines are
available today in the market. Some of them are shrink sleeve applicators,
shrink tunnels and L sealers.
L Bar Sealer
L sealer or L bar sealer gets it’s name from its shape which resembles a
backward “L”. L bar sealer is a popular packaging machine used in
industries for wrapping and sealing of products. An L type sealer for
packaging comes in a variety of sizes and with various options which
enable customized and easy operation of the machine. An L type sealing
machine works very fast and seals the products in just a single pass. This
type of equipment incorporates an L shaped sealer bar which cuts the film
outside shape of a package. It trims and seals the film with each down
stroke or cycle of the sealing bar. By using a center folded film, side seals
of the package are simultaneously formed and a fully sealed individual bag
around each product is produced which is then passed into heating tunnel
normally called the shrink tunnel heated and shrink-wrapped.

3. Shrink Tunnel
Shrink tunnel is the actual equipment in which shrinking process takes
place. It is a hot air circulating chamber encompassed with a conveyor in
which products to be shrink packed are passed through. Products are
carried on the conveyor through the tunnel just for a few seconds thereby
causing the wrapped film around the product to get heated and shrink on
the body of the container. Shrink tunnels for label shrinking are either built
into a production line or are integral with machinery that also applies the
shrink film like a shrink sleeve applicator.
Shrink Sleeve Applicator
Shrink sleeve applicator is a shrink labeling machine which consists of
shrink tunnel to perform the shrinking process. The machine is built with
components which can handle the entire shrink packaging process
including sealing and shrinking. Bottles of almost any shape and size can
be labeled with a shrink sleeve applicator machine.
Multipack Machinery is one of the best manufacturers and suppliers of
secondary packaging machines in India. The manufacturer offers the entire
range of above mentioned shrink labeling and wrapping machines in
different configurations and most desired specifications for easy and
efficient performance. To know in detail about the company and its
products, please have a look at http://www.multipackmachinery.com/contact-us/.