1. Mobile : (+974)-55136724, Home.: (+974)-44649902.
E-mail: bayeuen@gmail.com
CURRICULLUM VITAE.
OBJECTIVE:
To benefit an organization that can use a self-motivated, Ambition to
work hard and experienced related to oil and gas Industry maintenance
and leadership skill .
PROFILE:
Exposure overseas working experiences in Qatar-Middle East
and local world class multinational companies environmental in
Operations and Maintenance facilities
Results oriented and proven ability to handle multi task,
working with multi disciplines team and manage a variety of
works/services/ contractors.
Independent, strong problem solving Maintenance Static and
Rotating technical skills, self-motivated, Strong Maintenance
contractor leadership .
[QAPCO] A join venture company between Qatar Petroleum (QP) and
TOTAL company. (www.qapco.com) Duration: February 2000 till
Pressent.
2. POSITION: MECHANICAL LEADER.
Primary function is managing maintenance contractors rotating and static
to carry out the daily planned and unplanned maintenance activities
includes install, maintain, troubleshoot, Preventive, Alignment, and repair
equipment.
Experience :
• Completed overhaul major equipments in facilities such as
• Gas compressor Nouvo pignone major overhaul, change
bearing, dry gas seal, labirin seal with vendor.
• Steam turbine Nouvo Pignone major overhaul with vendor.
• Pumps [centrifugal pump, reciprocating pump, sundyne pump,
alignment shaft /coupling, Gears pump, multi stage pump,
screw pump], overhaul including change Bearing, mechanical
seals / packing, check shaft run out, install
• Root blower, fan blower, change bearing, seals, gears, fan
impeller, pulley, v-belt and alignment for pulley.
• Gearbox, change bearing, gear, oil seals and alignment
coupling.
• Conducted successfully overhaul and trouble shooting for
caterpillar, Volvo, cummin Diesel engine
• Contributed to plant facilities troubleshooting, find the root of
cause and fix the problems to ensure improve reliability of
equipments with engineering team.
• Preventive maintenance and overhaul for Ethylene, Caustic
soda, VCM and EDC loading arm.
• Nowadays I am also participated in Lubrication Team to ensure
all the equipment are well lubricated according to the
recommended lubrication.
PT. HUMPUSS AROMATIC ( REFINERY )
Duration: 1996 To 2000
POSITION: MECHANICAL FOREMAN
Primary function was managing maintenance contractors to carry out the
daily planned and unplanned maintenance activities includes install,
maintain, troubleshoot, and repair equipment in industry as directed by
the superior with comply to HSE standard.
3. • Involved in pre-commissioning, commissioning and inspection to
ensure that new plant was able to start up successfully operated.
• Improved reliability of equipments in the plant facilities by conducting
preventive maintenance, reactive maintenance and risk-based
inspection in time .
• Make daily report for lead and technician activity.
• Conducted HSE weekly and monthly safety meeting as leader to all
contractor
• Conducted Overhaul multi type of Pumps.
• Conducted Overhaul blower, ( loop, fan )
• Conducted successfully overhaul and trouble shooting for caterpillar
Diesel engine.
PT. KERTAS KRAFT ACEH ( PULP AND PAPER COMPANY )
Duration: 1989 To 1996
POSITION: SENIOR MECHANICAL TECHNICIAN
• Involved in pre-commissioning, commissioning and inspection to
ensure that new plant was able to start up successfully operated.
• Preventive maintenance program for rotating equipment check such as
monitoring and flow up of vibration abnormal heat, abnormal sound
and oiling and grease.
• Conducted plant Overhaul and repair of static equipments such as heat
exchanger, Cooler, Colum internal part, tank, pipe line etc.
• Conducted Overhaul and rebuild for all rotating equipments
(compressor, pump)
• Conducted Overhaul for rotary dryer, rotary feeder and screw
conveyor.
• Involved to the Trouble shooting plant, find root of caused and fixed
the problems.
• Conducted successfully overhaul and trouble shooting for Diesel
engine caterpillar
EDUCATION & TRAINING
Graduated from Senior Technical Hight School.
4. Status: Married with three children
Training and Course
• MEDIC first Aid BasicPlus V7.0 CPR,AED and First Aid for
Adults, 12 November 2014 with MEDIC First Aid at Qapco-
Qatar.
• SKF Reliability System training course from 16 to 18
september, 2014 with SKF at Qapco-Qatar.
• Lubrication Technology from17 to 21 april 2011, with
MASTERS technical consulting & solutions LLC, at Doha – Qatar.
• Manitowoc Crane Care ( GMK Intro) from 10 to 14 october
2010, with Manitowoc Crane Care at Qapco – Qatar.
• Manitowoc Crane Care (GMK 1) from 17 to 21 october 2010,
with Manitowoc Crane Care at Qapco – Qatar.
• Microsoft Office Exel 2007 – Level 2 from 09 to 10 june 2009,
with QAPCO – Qatar.
• Canadian Red Cross – Standard First Aid from 05 to 07 april
2009, with College Of The North Atlantic Qatar.
• Lubrication Technology & Equipment from 26 to 27 September
2005 with Qapco-Qatar.
• Rigging and Slinging Training Course from 03 to 05 May 2005,
with BUREAU VERITAS – Qatar.
• Modern Leadership and Supervisory Skill, 12 November 2005,
with Middle East Consultant & Training Co.Ltd – Qatar.
• Hiring Smart, 19 November 2005, with Middle East Consultant &
Training Co.Ltd – Qatar.
5. • Mechanical Seals Course, from 27 to 28 febuary 2005, with
QAPCO – Qatar.
• Lubrication Technology & Equipment, from 26 to 27 september
2005, with QAPCO – Qatar.
• MS Windows 2000, from 03 to 04 Mart 2004, with QAPCO –
Qatar.
• Basic Fire & Safety Course, from 17 to 21 Mart 1997, with PT.
ARUN – NGL. Lhokseumawe – Aceh, Indonesia.
• Cathodic Protection Course, from 26 to 30 august 1996, with PT
Muladaya Adipratama. Lhokseumawe – Aceh, Indonesia.
• Pelatihan Pemeliharaan Mesin ( Maintenance Equipment
Course), from 06 to 25 november 995, with LAPI-ITB,
Lhokseumawe, Aceh, Indonesia.
Best regards
ISHAK MUHAMMAD ADAM.
6. • Mechanical Seals Course, from 27 to 28 febuary 2005, with
QAPCO – Qatar.
• Lubrication Technology & Equipment, from 26 to 27 september
2005, with QAPCO – Qatar.
• MS Windows 2000, from 03 to 04 Mart 2004, with QAPCO –
Qatar.
• Basic Fire & Safety Course, from 17 to 21 Mart 1997, with PT.
ARUN – NGL. Lhokseumawe – Aceh, Indonesia.
• Cathodic Protection Course, from 26 to 30 august 1996, with PT
Muladaya Adipratama. Lhokseumawe – Aceh, Indonesia.
• Pelatihan Pemeliharaan Mesin ( Maintenance Equipment
Course), from 06 to 25 november 995, with LAPI-ITB,
Lhokseumawe, Aceh, Indonesia.
Best regards
ISHAK MUHAMMAD ADAM.