MJLM is a minority-owned small business providing engineering and technical services including logistics support, system design and development, software development, and quality assurance. It has over 100 employees located across several US locations supporting various government programs. In 2012, MJLM's revenue was $9.783 million.
Grateful 7 speech thanking everyone that has helped.pdf
MJLM Capabilities Presentation - 2013
1. MJLM Overview
DUNS: 175133805
Cage Code: 45TU4
4825 University Square, Suite 12
Huntsville, AL 35816
256-890-1800
hsvinfo@mjlm.com
MJLM Engineering & Technical Services
2. MJLM’s Foundation…
•
•
•
•
•
•
•
2
Small Disadvantaged Business – Minority Owned
Diversified workforce of ~100 employees to include
former Government, Military, and DRS Personnel
Federal Services Division established in May 2003
Graduated from the GSA Small Business 8(a)
Program in September 2011
Participated with SAIC in their Mentor-Protégé
program
Three (3) locations in Huntsville, AL
2012 Revenue was $9.783 million
MJLM Engineering & Technical Services
3. MJLM’s Locations…
US Locations:
Huntsville, AL
Houston, TX
Oak Ridge, TN
Washington, D.C.
MJLM Wealth Solutions
Oak Ridge, TN
(B&W Y-12)
MJLM Engineering & Technical Services
MJLM Consultants & Business Advisors
3
Corporate Location
MJLM Engineering & Technical Services
4. MJLM’s Organization…
ORGANIZATIONAL STRUCTURE
MJLM LLP
Odysseus Lanier
Senior Partner
(Corporate)
Houston, TX
MJLM E&TS
(Executives)
Huntsville, AL
MJLM E&TS
(Management)
Huntsville, AL
4
Leonard Harris
Executive VP &
Chief Technical
Officer
Gene Perry
Technical
Director
Gary Swartz
Program Director
Buford Crutcher
Executive VP of
Operations
Tabatha Holt
Business
Development
Director
MJLM Engineering & Technical Services
5. Our Mission…
MJLM Engineering & Technical Services is dedicated to
providing innovative solutions in lifecycle logistics, with a
focus on customer satisfaction, quality, and risk mitigation
Certifications/Registrations:
Primary NAICS Codes:
D&B and SAM Registered
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
ISO 9001: 2008 Certified
334515 – Instrument Manufacturing Testing Electrical Signals
CMMI Level 3 Compliant – Certification in-process
U.S./Canada JCP (Joint Certification Program)
334418 – Printed Circuit Assembly (Electronic Assembly)
334419 – Other Electronic Component Manufacturing
541330 – Engineering Services
541380 – Testing Laboratories
541512 – Computer Systems Design Services
541614 – Process, Physical Distribution & Logistics Consulting
541712 – R&D in Physical, Engineering & Life Sciences
561910 – Packaging and Labeling Services
561210 – Facilities Support Services0
5
MJLM Engineering & Technical Services
6. MJLM’s Core Competencies…
•
•
•
•
•
•
•
•
6
Requirements Analysis &
Definition
System Design &
Development
Software Development
Integration & Testing
Programmatic Planning
RESET
ATE Experience
Logistic Support
•
•
•
•
•
•
•
•
Configuration / Data
Management
Quality Assurance
Hardware/Software
Verification & Validation
Light Fabrication
CAD Drawing Development
TPS Development
Sustainment
Maintenance
MJLM Engineering & Technical Services
7. Who We Support…
•
Aviation & Missile Command (AMCOM) – Redstone Arsenal
•
Defense Logistics Agency (DLA) – Redstone Arsenal
•
National Security Complex – Oakridge, TN
•
Product Director Test, Measurement, & Diagnostic Equipment (PD TMDE) – Redstone Arsenal
•
Program Executive Office Missiles & Space (PEO M&S) – Redstone Arsenal
•
Software Engineering Directorate (SED) – Redstone Arsenal
•
Systems Sustainment Management Directorate (SSMD) – Redstone Arsenal
MJLM Team Members
7
MJLM Engineering & Technical Services
8. Our Contract Vehicles & Teams…
•
GSA Schedule PES # GS-10F-0117U
•
GSA 8(a) STARS II # GS-06F-0875Z
•
NGATS # W15QKN-13-D-0017
AMCOM Express
•
•
Design, Development, Demonstration, and
Integration (D3I)
•
•
•
Design and Engineering Support Program (DESP) III
•
TACOM OMNIBUS
8
•
Missile Defense Agency Engineering & Support
Services (MiDAESS)
Seaport –E
Systems Engineering and Technical Assistance 2010
(SETAC 10)
MJLM Engineering & Technical Services
9. Close Combat Weapon System
(CCWS)
The CCWS Project Office manages the TOW and Javelin weapon systems.
CCWS is also responsible for managing target acquisition systems to
include the Improved Target Acquisition System (ITAS)and the
sustainment efforts of the Bradley TOW 2 Sub-system (T2SS) and
Improved Bradley Acquisition Sub-system (IBAS).
Past Performance
• Supported the Bradley Fighting Vehicle since 2009
• RESET – Integrated Site Unit (ISU) to 10/20 Status
• Staging facility for 250 Shelter Program
• Reconfigured and Fielded 250 Shelters to Warfighter
• Produced over 704ea Missile Maintenance Tool Boxes
• Continuity Test Missile Simulated Rockets (MSR)
• Logistic Support throughout CONUS
• Provided Bradley Support to – DRS Melbourne
9
MJLM Engineering & Technical Services
10. Counter-Rocket, Artillery, & Mortar
(C-RAM)
C-RAM is responsible for life cycle management of automated Air and
Missile Defense (AMD) Command and Control (C2) systems, including
the Forward Area Air Defense Command and Control (FAAD C2) and Air
and Missile Defense Planning and Control System (AMDPCS). C-RAM
also manages Indirect Fire Protection Capability (IFPC) System-ofSystems (SoS) programs, to provide force protection against the
Indirect Fire (IDF) threat.
Past Performance
•
•
•
•
10
MJLM Liaison Officers (LNO) in OCONUS
Logistics Support for the Program Executive Office
(PEO) Missile & Space, Missile RESET Team
Item Management for Leave-Behind-Equipment
(LBE)
Ensure assets are manifested and forwarded to
Tobyhanna Army Depot
MJLM Engineering & Technical Services
11. Digital - Flexible Engine Diagnostic
System (D-FEDS)
MJLM provided Mechanical Engineering Design/Analysis to the Digital Flexible Engine Diagnostic System (D-FEDS), a test cell for aircraft
engines. MJLM was tasked to provide engineering and technical support
for the D-FEDS Reliability Improvement Program (RIP). This included
research, analysis, redesign, modifications, integration, and testing of all
prototypes.
Past Performance
• Improved system Reliability (D-FEDS RIP)
• Software Development
• Design
• System Integration
• Verification & Validation
11
MJLM Engineering & Technical Services
12. D-FEDS Reliability Improvement
Program (RIP)
Under D-FEDS, MJLM was tasked to provide engineering and technical support for
the D-FEDS Reliability Improvement Program (RIP). This included research, analysis,
redesign, modifications, integration, and testing of all prototypes. The D-FEDS RIP
effort has far-reaching operational impacts on active army, army national guard, and
air force units in fielded locations such as Groton, CT, Manheim, Germany, Kirkland
AFB, NM, and Camp Arifjan, Kuwait.
Advantages / Past Performance
• Electro-Magnetic Interface (EMI) Shielding
• Product improvement effort
• Mean time to repair (MTTR) analysis
• Mean time before failure (MTBF) studies
• Increased Reliability, availability, and maintainability (RAM)
12
MJLM Engineering & Technical Services
13. Dynamometer Warning System
(DWS)
The DWS is a prototype designed and built by MJLM for Immediate
Field Testing and Qualifying. Its purpose is to monitor the health of
aviation engines in support of the Digital-Flexible Engine Diagnostic
System (D-FEDS).
Past Performance
Hardware Scalability
•
Prototype Development
•
Research & Development
•
System Engineering
•
Obsolescence Mitigation
•
Sustainment Support to D-FEDS
Software Scalability
13
MJLM Engineering & Technical Services
14. Integrated Family of Test
Equipment (IFTE)
MJLM personnel use IFTE stations to test electronic and electrooptic assemblies for fault isolation of Line Replaceable Units (LRU)
and Shop Replaceable Units (SRU) at all levels of maintenance.
These stations are reconfigurable to adapt to new weapons system
technology with short development time frames. The use of IFTE
test stations reduce maintenance and logistics costs.
Supports
System Sustainment
Management Directorate
(SSMD)
Past Performance
•
Base Shop Test Facility V3 (BSTF)
•
Electro Optical Test Facility V5 (EOTF)
•
Electronic Equipment Test Facility (EETF)
•
Non-Destructive Test Equipment (NDTE)
•
Commercial Equivalent Equipment (CEE)
•
Electronic Repair Shelter (ERS)
•
Support of Support (SOS) TPS Development
•
Additional Test Program Sets (TPS) Development
14
MJLM Engineering & Technical Services
15. Low Voltage Digital Word
Generator (LV DWG)
The LV DWG enables low voltage digital testing of the IFTE system. To reduce lifecycle costs to the
IFTE program, MJLM provided AMRDEC support to redesign the LV DWG configuration to eliminate
proprietary and obsolescence issues. MJLM’s reconfiguration of the LV DWG provides the same
functionality requirements of the original version while utilizing current technology components and
a non-proprietary design. The redesigned LV DWG also improves asset readiness and significantly
reduces risk to mission readiness.
LV DWG Card
Digital Bucket
Past Performance
•
•
15
System Engineering
•
Card Installation
Prototype Development
Obsolescence Mitigation
•
Sustainment Support for IFTE
MJLM Engineering & Technical Services
16. Maintenance Operations
Procedures & Prototype (MOPP) Shop
The Kiowa's M3P system uses the existing Kiowa Warrior ammo
can, the Avenger feed chute and a simple, lightweight mount
designed by the MOPP shop. The new mount attaches the M3P
directly to the Universal Weapons Pylon (UWP) and eliminates a
cumbersome gun cage assembly. MJLM performs the complete
overhaul/RESET of the M3P .50-caliber Machine Gun to include:
Full disassembly, Parts inspection, Magnetic Particle
Examination (MPE), Parts requisition, Phosphate coating,
Reassembly of asset, Live-Fire Testing, Shipping/Packaging, and
Training of Government personnel future Kiowa field trainers.
Supports
Systems Sustainment
Management Directorate
(SSMD)
Redstone Arsenal, AL
Past Performance
•
•
Weapons System(s): OH-58 Kiowa & Avenger
•
Rivet Replacement Program
•
16
M3P .50-caliber Machine Gun
MJLM = ONLY M3P Depot facility worldwide
MJLM Engineering & Technical Services
17. Next Generation Automatic Test
System (NGATS)
MJLM and two other companies were awarded a $75M firm-fixedprice, IDIQ multiple award. The award will provide for the Automated
Test System Testing and Net-Centric support.
NGATS is the latest addition to Integrated Family of Test Equipment
(IFTE). NGATS is a reconfigurable, general-purpose, mobile,
deployable, Automatic Test System (ATS) designed to provide offplatform sustainment support to all Army weapon systems. The
testing platform provides diagnostic maintenance of Current and
Future Force electronic systems and will standardize the Army's
Automatic Test Equipment (ATE).
Supports
Product Director Test,
Measurement, & Diagnostic
Equipment (PD TMDE);
Redstone Arsenal
& Picatinny-ACC
Past Performance
•
Base Shop Test Facility V3 (BSTF)
•
Electro Optical Test Facility V5 (EOTF)
•
Electronic Equipment Test Facility (EETF)
16
MJLM Engineering & Technical Services
18. Joint Attack Munitions System
(JAMS)
The JAMS Project Office provides an unprecedented level of service
and support as the Life Cycle Manager for the Joint Warfighter's
Rocket and Missile Systems. The JAMS Project Office manages all
variants of the 70-mm Hydra Rocket (formerly 2.75-inch Rocket) and
the HELLFIRE Missile, as well as the JAGM, Viper Strike, Griffin, Hydra
70 Rocket Launchers, HELLFIRE Launchers, and Test Sets.
Past Performance
•
•
Field Maintenance, Training & Support
•
System Engineering
•
ALL Army Platforms Supported
•
Supports Small Guided Munitions
•
Technical Manual Support
•
17
RESET for JAMS Test Program Sets (TPS)
SSMD Contract Vehicle
MJLM Engineering & Technical Services
19. Launcher Test Station (LTS) Laser
Simulator Prototype Test Adapter
MJLM provides a prototype test adapter to detect the presence of an
infrared signal being transmitted from the laser simulator on the
HELLFIRE Launcher Test Station (LTS) for the M36 training missile test.
The prototype test adapter is designed, developed, and tested at the
MJLM facility in Huntsville, Alabama.
Features / Benefits
•
•
Cost Effective
•
Battery-Operated (9VDC)
•
Built In Test/ Built In Test Equipment (BIT/BITE)
•
Stand-Alone Test Adapter
•
18
User-Friendly
Compact in Size (approx. medium sized flashlight)
MJLM Engineering & Technical Services
20. Test Equipment & Instrumentation
Support Program (TEISP)
TEISP is a support project aiding organizations with their test equipment maintenance needs.
Currently, TEISP supports the US Air Force Material Command (USAFMC), US Air Force Security
Assistance Center (USAFSAC), US Army Test Measurement and Diagnostics Equipment Activity
(USATA), Software Engineering Development Center, and System Sustainment Management
Directorate (SSMD) internal organizations. TEISP provides component level repair of electronic
test equipment, as well as a means to perform technical publications verifications and
engineering testing. The program also provides repair, storage, and shipment of US Army assets
for issue to supported organizations worldwide.
Past Performance
•
•
•
•
•
•
19
Government savings of approx. $5M+
Delayed obsolescence of Air Force
aircraft instrumentation test set
AN/GRM122, and IFR4000 Test Program Sets (TPS)
development using QMAX Automatic Tester
PSD60 Fuel Quantity Test Set Repair
GPS simulator repair
125 yrs combined technical experience
MJLM Engineering & Technical Services
21. Cable Fabrication
Cable Fabrication & Assembly
Strip/Cut to Length
Twisted Pair
Coaxial/Twin Axial
Harness Assembly
Ribbon
Multiple Assembly
Processes
Industry/Gov Standards
Heat-Shrink Tubing
Splicing
Soldering
Sealing
Crimping
Past Performance
•
•
•
•
•
20
Kit Grounding
Kiowa Warrior
TEISP – Test Equipment Instrumentation
Support Program
D-FEDS – Digital-Flexible Engine Diagnostic
System
SOS – Support of Support TPS
Supports
•
•
•
AMCOM – Aviation & Missile Command
DLA – Defense Logistics Agency
CCWS – Close Combat Weapons System
MJLM Engineering & Technical Services
22. Circuit Card Assemblies
Wire Wrap Configuration Circuit Card
Evaluation, Design, and Development
Technology Conversion
Component Installation Evaluation
Printed Circuit Card Enhancement
and Replacement
Past Performance
•
•
•
21
Produce Prototype Automatic
Gain Control (AGC) Boards
Fabricate Kiowa Warrior Printed
Circuit Boards
Convert Manual Remote reKeying (MRK) Interface
Connecting Device (ICD) to
Printed Circuit Boards
Programs Supported
•
•
•
•
Kiowa Warrior
Test Equipment Instrumentation
Support Program (TEISP)
Flexible Engine Diagnostic System
(FEDS)
Support of Support (SOS) TPS
MJLM Engineering & Technical Services
23. Command Simulation Support
MJLM provides support of Advance Communication tasks systems related
to the Warfighter Protection Lab (WPL). This capability is transferable to
other agencies which support Upper and Lower Tier Defense Programs,
Strategic Border Initiatives, and other areas which aid in Government Force
Protection and Homeland Security Test-Bed development. MJLM supports
these areas through Independent Verification & Validation and System
Engineering Technical Assistance Contracts.
Past Performance
• Geospatial Engineering
•
WPL Exercise &
Deployment Expert
•
Real World Disaster
(Digital Map Generating)
• WPL Technical Services
• Software Development
• Information Technology
• Model & Simulation
22
MJLM Engineering & Technical Services
24. Computer-Aided Design (CAD)
MJLM develops 3-level Technical Data Packages (TDP) in support of various
Government programs.
Programs Supported
Past Performance
•
•
•
•
•
•
•
23
Drawing Modifications – AMRDEC
Drawing Conversion – DOE & DoD
Missile Simulated Rocket
Modification – CCWS
Relay Panel Assembly – FEDS
Variable Tracking Filter – FEDS
Timer-Panel Assembly – FEDS
Prototyping Activities – FEDS & JAMS
•
•
•
Close Combat Weapons System (CCWS)
Flexible Engine Diagnostic System (FEDS)
Joint Attack Munitions System (JAMS)
MJLM Engineering & Technical Services
25. In Summary…
MJLM has –
• Proven Infrastructure
• Experienced & Diverse Staff
• Customer Confidence confirmed by
High Performance Rating
• Innovation. Quality. Commitment.
24
MJLM Engineering & Technical Services
26. Contact Information
MJLM Engineering & Technical Services
4825 University Square – Suite 12
Huntsville, AL 35816
Office: 256-890-1800
Email: hsvinfo@mjlm.com
DUNS: 175133805
Cage Code: 45TU4
www.mjlmengineering.com
25
MJLM Engineering & Technical Services