1. European Jaw Crusher PEV
Brief introduction
PEV series of European Jaw Crusher is a new product absorbing world advanced
technology, bases on our present traditional jaw crusher, and adopts three-dimensional
design theory. Comparing with traditional jaw crusher, it has larger capacity and crushing
ratio, bigger range of input size, evener product size, and easier maintenance.
Features
1. Symmetrical deep crushing chamber is adopted to maximize range of feed size,
capacity and crushing ratio.
2. Three-dimensional software is adopted to optimize crusher parameters and
parameter proportion, and reduce equipment self-weight, so capacity is increased
more than 30%.
3. Bearing seat is designed integrally, so manufacturing difficulty is greatly reduced, and
bearing life is increased.
4. There is a thick replaceable plate on the top of moving jaw to prevent moving jaw from
being impacted.
5. Wedge is adopted to replace traditional gasket, so the adjustment is much easier and
more reliable. Discharging size can be adjusted into any size of the adjustment
range.
Technical parameters
Main shaft
Max. feed size Discharge Capacity Power Weight
Model speed
(mm) size (mm) (t/h) (KW) (t)
(r/min)
PEV400x600 380 40-80 20-65 270 30 7.02
PEV500x750 450 50-100 45-107 250 55 10
PEV750x1100 630 80-140 136-296 225 110 23.1
PEV900x1200 750 100-220 224-498 200 132 42.5
Any change of technical parameters, there is no further notice.
All rights reserved:
www.zoneding.com
www.zd-ballmill.com