1. Jaw crusher
Application of jaw crusher is one of the most popular in the
world, Jaw Crusher is ideally suitable for primary and
secondary crushing. The highest anti-pressure strength of
crushed material is 320MPa. It is widely used in mining,
metallurgy, construction, highway, railroad, and chemistry
industries and etc. Many models are available according to
your different fineness requirements.
The Crushing form of this series Jaw Crusher is driven-
squeezing style. Its working principle is: Motor drives belt
and belt pulley, makes moving jaw up and down through
eccentric shaft. When the moving jaw is up, the angle
between lining plate and moving jaw becomes large, and
this will push moving jaw plate close to the fixed jaw
plate. During this process, the material is crushed and
ground, thus the crushing will be done. When the moving
jaw is down, the angle between lining plate and moving
jaw becomes small, the moving jaw plate will leave the
fixed jaw plate on account of the effect of pulling bar and
spring, and then the crushed material will be discharged
2. from the lower opening of the crushing room. With the
motor continuously rotating and the material periodically
crushed and discharged by the crusher, the mass
production can be realized.