Go Green! Power Point Presentation of the IER Energy Saver. Please review and you will see how it works!

1. INTERNATIONAL ENERGY RESOURCES
PRESENTS
THE IER ENERGY SAVER (ES)!
Protecting, Preserving & Improving the
Environment
International Energy
Resources

2. The Need for the IER (ES)
•In the 21st century “Going Green” has
become a corporate responsibility
•With the rising cost of doing business,
Energy Efficiency is a must
•Help meet the social requirements of
“Being Green” and reap the financial
savings

3. The Problem
• Electric Motors use more than half of all electricity
• Electricity Costs:
– 1960’s .019/kwh
– 1970’s energy crisis .044/kwh
– 2008 .10+ /kwh
• Most A/C Induction motors operate at 80% efficiency
• NASA research proved that substantial savings could be
made on the running costs of A/C Induction motors

5. The Power Supply Dilemma
• The adequacy of North America’s Electricity system will
decline unless changes are made soon…
…demand for electricity is expected to increase over the
next ten years by 20% in the U.S., but confirmed power
capacity will increase by only 10%
-NERC (North American Electric Reliability Council)
“Over $16 billion dollars of electricity is unusable energy,
but billable in the US.”
- U.S. Dept. of Energy

6. 20% increase
in demand
with 10%
increase in
supply

7. How the Utility Company & the
Environment Benefit
• Enhancement of the capacity of the
existing electrical systems
• Power supplied to more customers without
the generation or acquisition of additional
power plants.
• Less fossil fuel being used to generate
power
• Less dependency on foreign oil

10. The Unique Energy Savings with the
IER (ES)
• The Patented diagnostic device & methodology
determines to an exact science how much capacitance is
required to bring each inductive load to unity
• Optimizing is precisely accomplished on each inductive
load in minutes
• The pre-engineered customized systems are assembled
from modular components based on sizing results
• Installation is fast and simple
• Power savings are immediate and can be up to 25%
• Realize a rapid return on investment (often 24 months or
less)

11. IER (ES)
• Innovative, unique & Patented *
• U.S. Manufactured
• NASA Tested and used
• U.S. Government certified
• UL Listed CSA Approved
• Cleaner & Greener / RoHS Certified
• Reduces the amount of non-productive current in your
existing electrical system, resulting in a significant
reduction in power consumption costs
• Thousands of installations worldwide
• 5 year warranty / 12 year on Residential
*Methodology & Apparatus

13. How does the IER Energy Saver
(ES) work?
• The IER (ES) stores the reactive power to create the electromagnetic field
(EMF) around the inductive windings of a motor
• As motors operate, reactive power is “pushed” and “pulled” to and from the
(ES) by the motor at 60 cycles per second
• The IER (ES) stores & releases to motors what they need to function more
efficiently
• Electricity reclaimed and recycled by the (ES) would normally be pushed
back through the power distribution lines
• The IER (ES) reclaims, stores, recycles and supplies Reactive power to
inductive loads

14. Other Benefits
• The IER (ES) improves the efficiency of the electrical
system & the kW capacity is increased
• Maintains quality voltage levels to your system with less
voltage drops especially long runs of cable
• Reduces the harmful effects from the EMF’s
• Less power system losses in your distribution system
• Reduces the heat on wires and motors
• Decreases premature failure of motors and other
inductive equipment
• Motors run cooler and are more efficient
• Increases the life of the motors
• Reduces maintenance costs

15. Causes of Low Power Factor
• Inductive loads are usually the major portion of
the power consumed in commercial buildings &
industrial complexes – 80% or more
• Types of Inductive loads (reactive Power)
– Transformers
– Motors
– Compressors
– Fluorescent lighting with T-12 ballasts
– Older style high intensity discharge lighting (HID)
– Lightly loaded motors are wasteful and result in lower
power factor

16. Power Factor Correction
• A 20th Century Technology
• Installed on the line side near the main service
• Main purpose is for the utility company to “clean up”
their “dirty Power” and saves the electric company
money
Power factor Optimization
• A 21st Century Technology
• Installed on the demand side, close to the equipment
• Reduces amperage kWH (slows the meter)
• Saves the customer money
• Reduce or eliminate Power Factor Correction penalties

17. Why you should optimize
Power Factor?
• Reducing Amperage & kW usage, directly
reflects dollar savings
• Reduce the monthly “demand charge”
• Eliminate the primary power factor
surcharge penalty
– Utilities usually charge customers an
additional fee (up to 25% more) when their
power factor is less than 0.85 (PFC
equipment)

18. Installing the IER (ES) Units
• 2 Types of installations with the IER (ES)
Panel Mount – accumulation of smaller
inductive loads
• Single Phase panel mount
• Three Phase panel mount
Equipment Mount – Larger individual
inductive loads

19. Return on Investment
Depends On:
• Age of Equipment
• Percentage of PF optimization
• kW per hour charged
• Run time of inductive loads
• Panel mount or equipment mount
• Amount of equipment and labor needed
for optimization

26. School District, DE
8 out of 10 Schools
Total = 38% Savings

29. Measuring Power
Factor
Select Power
Factor
Clamp Load Wire
Leads on Positive
and Ground
Read and record
initial power
factor and Amps

30. Initial Amps
33.85

31. Optimized Amps 27.30
6.55 Amp Difference
19.35% Reduction

36. How the process works!
• Initial meeting to discuss technology and
application for your facility.
– This is primarily a discussion that lets you find out
who we are and what we provide.
– During this meeting we will gather information about
your facility. This is called a pre assessment review
(PAR)
– This information is used to deliver to you an estimate
for us to complete an energy analysis of the facility.

38. Energy Analysis
• An Energy analysis is preformed by a specially trained and licensed
electrician/s
– Our team will conduct checks of all relevant electrical panels and
individual electric motors
– Information that we are gathering is related to Voltage, Current, Power,
and Power Factor
– After the initial readings are taken our patented equipment is hooked
up to optimize each load.
– Often times the electrician is confronted with situations in your facility
that need immediate attention, this information might not have been
discovered until to late, had we not been there. We will immediately
notify you if this occurs.
– The analysis process is not typically disruptive to the work force and all
of our personnel conduct themselves in a professional manner.

39. Energy Analysis
• Upon completion of the analysis all data is
forwarded to the I.E.R. corporate office for
review.
• The review process consist of data obtained,
special notes from the electrician and
parameters of actually installing the equipment.
• The data will now be compiled into a proposal
for customer review.

45. WHY NOW?
• Conditioned power can increase the life
of all electric motors in the facility
leading to reduced maintenance costs.
• Up to 25% SAVINGS realized
immediately upon installation.
• Environmentally responsible
organizations are leading the charge in
Protecting, Preserving & Improving our
environment.